Related products

• 

  Ameripolish Classic Dye

  Hire

  • Day Rate

    $8.50 – $250.00 / Day

  <h5>Features</h5> <ul> <li>Solvent-based, mixes with acetone, available in 22 colors</li> <li>Colors penetrate the surface and never wear off</li> <li>Will not grind off during resin-grinding stages of polished concrete</li> <li>Coordinate with AmeriPolish Edge Tints for a seamless wall-to-wall floor solution</li> <li>For indoor use only</li> <li>Coverage rate is approximately 400-700 sq ft per gallon</li> </ul> Originally designed specifically for polished and exposed concrete, the AmeriPolish Classic dyes penetrate into the surface of the concrete slab for extremely long lasting color that will not wear from daily usage. Classic dyes can be used as a base color or touch up for concrete that has received integral color, dry shake hardenrs, acid stains, or even layered to create a truly unique, mottled effect.

  Select options
• 

  Ameripolish – Edge Tint Part B

  Hire

  • Day Rate

    $69.00 / Day

  <h4>Features</h4> <ul> <li>Available in 22 AmeriPolish coordinating colors</li> <li>Creates uniform edges and borders to eliminate edge work</li> <li>Resists most oil, grease and food stains</li> <li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li> </ul>

  Select options
• 

  Ameripolish EZ Etch

  Hire

  • Day Rate

    $45.00 – $2,475.00 / Day

  <h4>Features</h4> <ul> <li>Opens the concrete to prepare it for penetrating agents</li> <li>Safe for interior and exterior environments</li> <li>Biodegradable, low odor, and non-flammable</li> <li>Can be used safety on new or restoration construction, industrial facilities, commercial spaces, food packaging facilities, and residential areas</li> <li>Coverage rate is approximately 200 - 400 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish SureLock Dye

  Hire

  • Day Rate

    $8.50 – $225.00 / Day

  <h4>Features</h4> <ul> <li>Updated formula</li> <li>Most vibrant concrete dye Ameripolish has ever produced</li> <li>Mixes with water or acetone and is VOC compliant</li> <li>Consistent, rich penetrating color with UV stabalizers prevent fading</li> <li>Surelock is to be applied just before densifying with 3D HS or HSL</li> <li>Liquid concentrate eliminates the three hour wait to dissolve dye required by other products</li> <li>For indoor use only</li> <li>Coverage rate is approximately 400-700 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish 3D HSL Concrete Densifier

  Hire

  • Day Rate

    $114.00 – $5,678.00 / Day

  <h5>Features</h5> <ul> <li>Hardens deep within the slab to improve durability even after grinding</li> <li>Contains UV stabalizers to help protect color from fading</li> <li>Ideal for new construction, existing concrete, and diamond pad burnishing</li> <li>Enhances polished color, gloss and clarity</li> <li>Provides superior stain resistance especially when combined with SR2 Sealer</li> <li>Coverage rate is approximately 600 - 800 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish X-Link E WL Surface Sealer

  Hire

  • Day Rate

    $43.00 – $10,705.00 / Day

  <h4>Features</h4> <ul> <li>RTU - Ready to use</li> <li>“Wet-Look” finish</li> <li>breathable and fast drying</li> <li>Oil and chemical resistant</li> <li>Non-yellowing stain finish</li> <li>Added mildew and UV protection</li> <li>Ideal for outdoor applications</li> <li>Coverage rate is approximately 500-1000 sq ft per gallon</li> <li>Can be applied to most cementitious surfaces, other unglazed stone, and masonry surfaces</li> </ul>

  Select options
• 

  Ameripolish EZ-Kut Grinding Agent

  Hire

  • Day Rate

    $45.00 – $10,873.00 / Day

  <h4>Features</h4> <ul> <li>Speeds up the time spent on initial cut on hard, dense concrete</li> <li>Helps with exposing large aggregate faster than dry only or standard wet methods</li> <li>Maximizes efficiency, increases productivity and extends the life of diamond tooling</li> <li>Reduces labor costs</li> <li>Water-based and VOC compliant</li> <li>Shortens the project time-line</li> <li>Unique DRY method avoiding the hassle of dealing with slurry</li> </ul>

  Select options
• 

  Color Juice 3D Hardener (Part A)

  Hire

  • Day Rate

    $27.50 – $137.50 / Day

  <h4>Features</h4> <ul> <li>Excellent UV resistance</li> <li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li> <li>Reducing freeze/thaw damage and salt damage</li> <li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li> <li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li> <li>Easily applied with pump sprayer.</li> <li>Horizontal or vertical application.</li> </ul>

  Select options