Rapid Set® CEMENT ALL® is a high-performance, fast-setting, multipurpose concrete repair material. It is better than low shrinkage – it is a non-shrink grout. This product is produced by CTS Cement Manufacturing Corp.
Uses
For general and structural concrete repair, doweling and anchoring, industrial grouting, formed work, and vertical and horizontal trowel applications.
It is ideal for concrete slab repair and can also be used for industrial settings like airport projects and highway repair – to name just a few applications.
Wet Environment Capabilities
Durable in wet environments,CEMENT ALL is a blend of Rapid Set hydraulic cement and specially graded fine aggregates. CEMENT ALL is non-metallic and no chlorides are added.
Mixing With Water
Mix CEMENT ALL with water to produce a workable, high quality material that is ideal where rapid strength gain and high durability are desired. CEMENT ALL sets in 15 minutes and achieves structural strength in 1 hour.*
Mixing Steps
A power-driven mechanical mixer, such as a mortar mixer or a drill mounted mixer, is recommended. Organize work so that all personnel and equipment are in place before mixing. Use clean potable water. CEMENT ALL may be mixed using 3 to 3.75 quarts (2.8 L to 3.5 L) of water per 55-lb (25 kg) bag for Department of Transportation projects and other critical applications. For general purpose and high fluidity applications, a maximum of 5 quarts (4.7 L) may be used. Use less water to achieve higher strengths. For increased fluidity and workability, use Rapid Set® FLOW Control® plasticizing admixture from the Rapid Set® Concrete Pharmacy®. Place the desired quantity of mix water into the mixing container. While the mixer is running, add CEMENT ALL. Mix for the minimum required time to achieve a lump-free, uniform consistency (usually 1 to 3 minutes). Do not retemper.
Environmentally Friendlier Than Portland Cement
Use CEMENT ALL to reduce your carbon footprint and lower your environmental impact. Production of Rapid Set cement emits far less CO2 than Portland cement. Contact our helpful representatives at Pantheon Surface Prep for specifics regarding LEED values and additional information.
Applying CEMENT ALL
Apply CEMENT ALL in thicknesses from featheredge to 4” (10 cm). Depending on your particular requirements, your minimum thickness may be even more – especially for high traffic areas that encounter heavier loads. For deeper sections, use a fast setting concrete mix. Options to consider include other Rapid Set Products including Rapid Set® Mortar Mix or Rapid Set® Concrete Mix. Do not use in high heat applications where temperatures exceed 300degrees Fahrenheit.
Reviews
There are no reviews yet.