Related products

• 

  Ameripolish ColorSolve

  Hire

  • Day Rate

    $55.00 – $2,141.00 / Day

  <h4>Features</h4> <ul> <li>Updated formula</li> <li>Leaves no or very little residual dye on surface saving time on cleaning and dye expense</li> <li>Doubles the coverage rate of concrete dyes</li> <li>Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking</li> <li>Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing</li> </ul>

  Select options
• 

  Ameripolish PCA Curing Agent

  Hire

  • Day Rate

    $199.00 – $9,499.00 / Day

  <h4>Features</h4> <ul> <li>Improves cure by retaining slab moisture</li> <li>High penetrating, non film forming</li> <li>Forms hydrophobic barrier to increase stain repellancy</li> <li>Improves scratch and abrasion resistance</li> <li>Reduces efflorescence and minimizes dust for healthier indoor air quality</li> <li>Replaces traditional Cure & Seal products on new concrete</li> <li>Coverage rate is approximately 1,000 - 1,500 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish X-Link E WL Surface Sealer

  Hire

  • Day Rate

    $39.80 – $9,415.80 / Day

  <h4>Features</h4> <ul> <li>RTU - Ready to use</li> <li>“Wet-Look” finish</li> <li>breathable and fast drying</li> <li>Oil and chemical resistant</li> <li>Non-yellowing stain finish</li> <li>Added mildew and UV protection</li> <li>Ideal for outdoor applications</li> <li>Coverage rate is approximately 500-1000 sq ft per gallon</li> <li>Can be applied to most cementitious surfaces, other unglazed stone, and masonry surfaces</li> </ul>

  Select options
• 

  Wagman Eco Coat

  Hire

  • Day Rate

    $86.00 – $383.00 / Day

  <h4>Highlights</h4> <ul> <li>Penetrates, doesn't leave oily film</li> <li>V.O.C. compliant / low odor</li> <li>Environmentally safe and water soluble</li> <li>Non-staining and non-dusting</li> <li>Meets Army Corp. of Engineers specs</li> <li>Can be used as a rust inhibitor</li> <li>Safe for use on most surfaces</li> <li>Will not rinse off in rain</li> <li>Economical concentrate</li> <li>Concentrate reduces shipping cost</li> <li>Easy to mix and apply, suggested mix ratios vary with applications</li> <li>Virtually non-stick</li> </ul>

  Select options
• 

  Ameripolish Paver Sealer

  Hire

  • Day Rate

    $35.45 – $7,747.50 / Day

  <h4>Features</h4> <ul> <li>Breathable barrier prevents staining and seals out moisture</li> <li>Protects color from UV degradation</li> <li>Non-yellowing finish will not peel, crack, blister, or blush</li> <li>Environmentally safe, low VOCs</li> <li>Coverage rate is approximately 300-600 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish Penetrating Agent Plus 30oz

  Hire

  • Day Rate

    $42.00 / Day

  <h4>Features</h4> <ul> <li>Improves dye penetration</li> <li>Minimizes surface residue and reduces materials waste</li> <li>Very easy to use, just add 4oz to a premixed gallon of dye</li> <li>Extends the drying time of Ameripolish solvent-based dyes</li> <li>Can be used on most cementious surfaces</li> <li>Ideal for very dense or hard concrete where normal dye will not penetrate</li> <li>Comes in a convenient and easy container that helps you mix the right ratio every time</li> </ul>

  Add to cart
• 

  Ameripolish 3D HSL Concrete Densifier

  Hire

  • Day Rate

    $108.15 – $5,407.50 / Day

  <h5>Features</h5> <ul> <li>Hardens deep within the slab to improve durability even after grinding</li> <li>Contains UV stabalizers to help protect color from fading</li> <li>Ideal for new construction, existing concrete, and diamond pad burnishing</li> <li>Enhances polished color, gloss and clarity</li> <li>Provides superior stain resistance especially when combined with SR2 Sealer</li> <li>Coverage rate is approximately 600 - 800 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish X Link WB Surface Sealer

  Hire

  • Day Rate

    $31.00 – $7,550.00 / Day

  <h4>Features</h4> <ul> <li>RTU - Ready to use</li> <li>Breathable and fast drying</li> <li>Oil and chemical resistant</li> <li>Non-yellowing stain finish</li> <li>Added mildew and UV protection</li> <li>Ideal for indoor and outdoor applications</li> <li>Available in 'Wet Look' or stain finishes</li> <li>Coverage rate is approximately 300-500 sq ft per gallon</li> </ul>

  Select options