The new DC6000, is an efficient dust collector to match the highly productive PG 820 and PG 680 Dual Drive grinding machines. The DC 6000 is developed with patented cyclone technology featuring automatic filter cleaning. The cyclone technology enables constant high air flow and high productivity, leaving minimal dust on the floor and thereby allowing continuous operating time.
Patended cyclone technology enables more than 95% separation of dust, i.e. only a small amount of dust continues to filter.
Automatic filter cleaning keeps filter clean and effective, which means a productive dust collector without loss in suction.
A HEPA 13 rated filter means no air-born dust and a minimal amount of dust left on the floor surface – resulting in a cleaner working environment.
Longopac® allows fast, drop-down and dust free disposal into individually sealed plastic bags.
The auxiliary power outlet enables quick and easy power connection of the PG 820/680. Only one cable is needed to be connected to the power supply.
The machine can be lower to access most vehicles and to enable easy transportation.
Cyclone with 95% efficiency – only small amount of dust continues to filter.
Automatic filter cleaning – no clogged filter.
ePFTE coated filter – easy to clean filter.
Low noise and clean working environment: A dust-free environment with low noise makes a better working place. The blower runs quietly and leaves no airborne dust. The HEPA 13 rated filters meets health environment standards. Longopac bags allows fast and dust free disposal into individually sealed plastic bags.
95% separation of dust: Patented double shell cyclone technology, gives more than 95% separation of dust, i.e. only a small amount of dust continues to filter.
Easy to use: This machine is easy to use and easy to transport – you can lower the machine into transport mode. Thanks to the automatic filter cleaning the dust collector keeps the same efficiency over time. It is also quick and easy to connect the dust collector with your floor grinder, just use the Aux power outlet. It also has an user friendly logical control panel (HMI), which allows automatic and manual purge settings.
High productivity: Thanks to the automatic filter cleaning, you can keep operating without interruptions. The dust collector has a constant high airflow, and leaves minimum dust on the floor.
For demanding industrial applications, where high suction and air flow are required for efficient dust management.
For job sites with strict working environment regulations.
Wet and dry applications.
Phases: 3 ph
Voltage: 480 V
Rated current: 15.9 A
Frequency: 60 Hz
Max. vacuum: 3.05 psi
Rated input power: 10.33 hp
Air requirement: 406 cfm
Micro filter area: 32 ft²
Available for Dropship Not Available for Local Pick-up.