7350 CrownPro AcidShield is a multifunctional phenol novolac epoxy that is extremely chemical resistant with a high heat deflection temperature. 7350 CrownPro AcidShield is a high viscosity thick film novolac coating designed to cure at ambient temperatures to provide exceptional corrosion protection for surfaces in severe chemical and physical environments. It can be applied directly over 8303 CrownShield MVB (moisture mitigation primer). It is VOC Compliant in all states and provinces in North America
Crown Polymers 7350 CrownPro AcidShield Novolac Epoxy
Available in:
- CrownPro AcidShield 7350 Medium Gray- 4 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money.
Technical Data Sheet
FB Product Number
COAT10574 | CrownPro AcidShield 7350 Medium Gray- 4 gal Kit |
Related products
-
Ameripolish SureLock Dye
Hire
-
Day Rate
$8.50 – $225.00 / Day
<h4>Features</h4> <ul> <li>Updated formula</li> <li>Most vibrant concrete dye Ameripolish has ever produced</li> <li>Mixes with water or acetone and is VOC compliant</li> <li>Consistent, rich penetrating color with UV stabalizers prevent fading</li> <li>Surelock is to be applied just before densifying with 3D HS or HSL</li> <li>Liquid concentrate eliminates the three hour wait to dissolve dye required by other products</li> <li>For indoor use only</li> <li>Coverage rate is approximately 400-700 sq ft per gallon</li> </ul>Select options -
-
Ameripolish Oil Ingester System
Hire
-
Day Rate
$82.50 – $412.50 / Day
<h4>Features</h4> <ul> <li>Safely remove or ligthens oil stains from most surfaces</li> <li>Stops oil from continually wicking to the surface</li> <li>Does not damage colorants, sealers, or stain protectors</li> <li>Will not etch polished concrete</li> <li>Biodegradable, environmentally safe, and VOC compliant</li> <li>Works best above 55ºF</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>Select options -
-
Ameripolish ColorSolve
Hire
-
Day Rate
$55.00 – $2,141.00 / Day
<h4>Features</h4> <ul> <li>Updated formula</li> <li>Leaves no or very little residual dye on surface saving time on cleaning and dye expense</li> <li>Doubles the coverage rate of concrete dyes</li> <li>Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking</li> <li>Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing</li> </ul>Select options -
-
Ameripolish 3D HSL Concrete Densifier
Hire
-
Day Rate
$108.15 – $5,407.50 / Day
<h5>Features</h5> <ul> <li>Hardens deep within the slab to improve durability even after grinding</li> <li>Contains UV stabalizers to help protect color from fading</li> <li>Ideal for new construction, existing concrete, and diamond pad burnishing</li> <li>Enhances polished color, gloss and clarity</li> <li>Provides superior stain resistance especially when combined with SR2 Sealer</li> <li>Coverage rate is approximately 600 - 800 sq ft per gallon</li> </ul>Select options -
-
Ameripolish – Edge Tint Part A
Hire
-
Day Rate
$55.00 / Day
<h4>Features</h4> <ul> <li>Available in 22 AmeriPolish coordinating colors</li> <li>Creates uniform edges and borders to eliminate edge work</li> <li>Resists most oil, grease and food stains</li> <li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li> </ul>Add to cart -
-
Ameripolish Classic Dye
Hire
-
Day Rate
$8.50 – $250.00 / Day
<h5>Features</h5> <ul> <li>Solvent-based, mixes with acetone, available in 22 colors</li> <li>Colors penetrate the surface and never wear off</li> <li>Will not grind off during resin-grinding stages of polished concrete</li> <li>Coordinate with AmeriPolish Edge Tints for a seamless wall-to-wall floor solution</li> <li>For indoor use only</li> <li>Coverage rate is approximately 400-700 sq ft per gallon</li> </ul> Originally designed specifically for polished and exposed concrete, the AmeriPolish Classic dyes penetrate into the surface of the concrete slab for extremely long lasting color that will not wear from daily usage. Classic dyes can be used as a base color or touch up for concrete that has received integral color, dry shake hardenrs, acid stains, or even layered to create a truly unique, mottled effect.Select options -
-
Ameripolish SR2 Concrete Sealer WB
Hire
-
Day Rate
$76.00 – $19,000.00 / Day
<h4>Features</h4> <ul> <li>Great alternative where solvent based products are not applicable</li> <li>Economical penetrating sealer alternative</li> <li>Non-topical penetrating sealer</li> <li>Treated surfaces 'breathe' and do not trap moisture</li> <li>Excellent stain repellency for residential, commercial, and even industrial applications</li> <li>Extreme hydrophobic and oil phobic characteristics for maximum stain resistance</li> <li>Coverage rate is approximately 2,000 - 3,000 sq ft per gallon</li> </ul>Select options -