<h4>Features</h4>
<ul>
<li>Available in 22 AmeriPolish coordinating colors</li>
<li>Creates uniform edges and borders to eliminate edge work</li>
<li>Resists most oil, grease and food stains</li>
<li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li>
</ul>
Add to quote
<h5>Features</h5>
<ul>
<li>Hardens deep within the slab to improve durability even after grinding</li>
<li>Contains UV stabalizers to help protect color from fading</li>
<li>Ideal for new construction, existing concrete, and diamond pad burnishing</li>
<li>Enhances polished color, gloss and clarity</li>
<li>Provides superior stain resistance especially when combined with SR2 Sealer</li>
<li>Coverage rate is approximately 600 - 800 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Improves dye penetration</li>
<li>Minimizes surface residue and reduces materials waste</li>
<li>Very easy to use, just add 4oz to a premixed gallon of dye</li>
<li>Extends the drying time of Ameripolish solvent-based dyes</li>
<li>Can be used on most cementious surfaces</li>
<li>Ideal for very dense or hard concrete where normal dye will not penetrate</li>
<li>Comes in a convenient and easy container that helps you mix the right ratio every time</li>
</ul>
Add to quote
<h4>Features</h4>
<ul>
<li>Excellent UV resistance</li>
<li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li>
<li>Reducing freeze/thaw damage and salt damage</li>
<li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li>
<li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li>
<li>Easily applied with pump sprayer.</li>
<li>Horizontal or vertical application.</li>
</ul>
Select options
HardCore is a Lithium Silica and Potassium Siliconate formulation that allows for deep penetration in the floor surface. The chemical reaction between HardCore and the floor creates hard, crystalline structures within the floor. It fills voids, adds structure, and reduces porosity of floors. HardCore increases durability of floors, while prolonging shine and stain resistance.
Add to quote
LockOut is a micro-film forming surface treatment that hardens and protects the floor. It creates a breathable, ultra-hard, water and dust repellent surface. The formulation is an acrylic polymer and colloidal lithium blend that offers superior stain protection and the ability to burnish the floor to a high gloss shine.
Add to quote
<h4>GemSeal Specifications</h4>
<ul>
<li>1 gal. bottles, 5 gal. pails, and 55 gal. drums</li>
<li>250 to 350 ft<sup>2</sup> per gal.</li>
<li>100 VOC; 400 VOC; 700 VOC</li>
<li>Solvent-based</li>
<li>Wet-Look; High-Gloss</li>
</ul>
Add to quote
<h4>PolySeal Specifications</h4>
<ul>
<li>1 gal. bottles and 5 gal. pails</li>
<li>250 to 350 ft<sup>2</sup> per gal.</li>
<li>100 VOC; 400 VOC; 650 VOC</li>
<li>Solvent-based</li>
<li>Glossy finish</li>
<li>Interior / exterior use</li>
<li>Resist oil, grease, and food stains</li>
</ul>
Add to quote
<h4>Traction Grip Specifications</h4>
<ul>
<li>16 oz bottles</li>
<li>≤ 16 oz per 5 gal. of sealer</li>
<li>Compatible with Gem-Seal and Poly-Seal</li>
<li>Does not affect color, gloss, or viscosity</li>
<li>No sharp edges</li>
<li>Disperses easily</li>
</ul>
Add to quote
<h4>Features</h4>
<ul>
<li>Saves time and labor</li>
<li>No hazardous waste removal</li>
<li>Prevents dusting and increases durability</li>
<li>Quickly reacts within 10 to 15 minutes</li>
<li>No surface residue to scrub off</li>
<li>No whiting when dry</li>
<li>Low viscosity for easy spray application</li>
<li>Safer pH level (less than 10 pH)</li>
<li>Will not contribute to Alkali-Silica Reaction (ASR)</li>
<li>Concentrate and Ready-To-Use formulas</li>
</ul>
Add to quote
<h4>Features</h4>
<ul>
<li>Saves time and labor</li>
<li>No hazardous waste removal</li>
<li>Prevents dusting and increases durability</li>
<li>Quickly reacts within 10 to 15 minutes</li>
<li>No surface residue to scrub off</li>
<li>No whiting when dry</li>
<li>Low viscosity for easy spray application</li>
<li>Safer pH level (less than 10 pH)</li>
<li>Will not contribute to Alkali-Silica Reaction (ASR)</li>
<li>Concentrate and Ready-To-Use formulas</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Simplifies Maintenance</li>
<li>Extends Stain Resistance</li>
<li>Improves Traffic-Wear Resistance</li>
<li>Improves Traction</li>
<li>Enhances Color</li>
<li>Multiple Applications Over Prolong Periods</li>
<li>Works with or without Burnishing</li>
<li>Concentrate and Ready-To-Use formulas</li>
</ul>
Add to quote