Showing 1–16 of 27 results

  • Pantheon – Panthifier Densifier

    Hire
    • Day Rate

      $99.00$1,147.00 / Day
    <strong>PANTHIFIER</strong><strong>™</strong> Lithium Densifier is an economical cost effective chemical treatment used to enhance the grinding and polishing process (metal and resin bonded abrasives) of architectural polished concrete surfaces. <strong>PANTHIFIER</strong><strong>™</strong> rapidly produces a harder denser surface that is easily profiled and polished. Its deep penetrating, non-soluble properties provide longer life and higher reflectivity. Ultimately this results in superior durability, exceptional gloss retention and reduced maintenance costs. <strong>PANTHIFIER™</strong> is crucial to the installation of the ultra surfaces when polishing or re-polishing and restoring worn or damaged surfaces. With proper installation <strong>PANTHIFIER™</strong> will not leave a clouding effect that can be difficult to remove. <strong>PANTHIFIER™</strong> is easy to apply and user friendly requiring only one treatment with no need for brooming or rinsing. Using <strong>PANTHIFIER™</strong> will improve the service life of resin bonded abrasives and speed up the process of polishing the substrate. The treatment will not contribute to alkali silica reactivity (ASR) and inhibits alkali salts (efflorescence) and sweating in concrete surfaces. <strong>ADVANTAGES</strong> <ul> <li>Deepens clarity and heightens reflectivity</li> <li>Penetrates, seals existing hardened floors</li> <li>Improves chemical and water resistance</li> <li>Increases abrasion resistance</li> <li>Reduces alkalinity / efflorescence</li> <li>Extends the service life of the floor</li> <li>User friendly, non-whitening</li> <li>Easy to use and maintain</li> <li>Environmentally friendly – VOC compliant</li> <li>Interior / exterior use</li> </ul> <strong>FB Product Number</strong> <strong>CH00000</strong> - Panthifier Densifier 5 Gallon <strong>CH00001</strong> - Panthifier Densifier 1 Gallon <strong>CH00002</strong> - Panthifier Densifier 55 Gallon Drum
    Select options
  • 20%OFF!

    Ashford Formula

    Hire
    • Day Rate

      $95.00$919.00 / Day
    Select options
  • Ameripolish – Edge Tint Part A

    Hire
    • Day Rate

      $55.00 / Day
    <h4>Features</h4> <ul> <li>Available in 22 AmeriPolish coordinating colors</li> <li>Creates uniform edges and borders to eliminate edge work</li> <li>Resists most oil, grease and food stains</li> <li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li> </ul>
    Add to cart
  • Ameripolish 3D HSL Concrete Densifier

    Hire
    • Day Rate

      $108.15$5,407.50 / Day
    <h5>Features</h5> <ul> <li>Hardens deep within the slab to improve durability even after grinding</li> <li>Contains UV stabalizers to help protect color from fading</li> <li>Ideal for new construction, existing concrete, and diamond pad burnishing</li> <li>Enhances polished color, gloss and clarity</li> <li>Provides superior stain resistance especially when combined with SR2 Sealer</li> <li>Coverage rate is approximately 600 - 800 sq ft per gallon</li> </ul>
    Select options
  • Ameripolish Penetrating Agent Plus 30oz

    Hire
    • Day Rate

      $42.00 / Day
    <h4>Features</h4> <ul> <li>Improves dye penetration</li> <li>Minimizes surface residue and reduces materials waste</li> <li>Very easy to use, just add 4oz to a premixed gallon of dye</li> <li>Extends the drying time of Ameripolish solvent-based dyes</li> <li>Can be used on most cementious surfaces</li> <li>Ideal for very dense or hard concrete where normal dye will not penetrate</li> <li>Comes in a convenient and easy container that helps you mix the right ratio every time</li> </ul>
    Add to cart
  • Color Juice 3D Hardener (Part A)

    Hire
    • Day Rate

      $27.50$137.50 / Day
    <h4>Features</h4> <ul> <li>Excellent UV resistance</li> <li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li> <li>Reducing freeze/thaw damage and salt damage</li> <li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li> <li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li> <li>Easily applied with pump sprayer.</li> <li>Horizontal or vertical application.</li> </ul>
    Select options
  • CTS Cement – Rapid Set Dark Pigment

    Hire
    • Day Rate

      $4.00 / Day
    <h5>Darken the color of your mixture. Use only with Rapid Set® cement products. Add to concrete, mortar or grout.</h5> <p class="product-blurb">Dark is an additive that darkens the shade of gray color of Rapid Set® cement products. Add up to 4 packets maximum per 50-lb to 70-lb bag by dry blending Dark uniformly into Rapid Set cement products. Dark may be used with all other Rapid Set® Concrete Pharmacy® products.</p>
    Add to cart
  • CTS Cement – Rapid Set Fast Accelerating Additive

    Hire
    • Day Rate

      $4.00 / Day
    <h5>Add in low temperatures. Use only with Rapid Set® cement products. Add to concrete, mortar or grout.</h5> <p class="product-blurb">Fast is an additive that speeds up the setting time of Rapid Set® cement products when experiencing extreme cold weather environments. Add 1 to 5 packets per 50-lb to 70-lb bag of Rapid Set cement product. Fast may be used with all other Rapid Set® Concrete Pharmacy® products.</p>
    Add to cart
  • CTS Cement – Rapid Set Flow Control 2.1 oz

    Hire
    • Day Rate

      $4.00 / Day
    <h5>Increases fluidity or reduces water. Increases compressive strength. Use only with Rapid Set® cement products.</h5> <p class="product-blurb">FLOW Control® is an additive that increases the fluidity of Rapid Set® cement products. FLOW Control can increase compressive strength of Rapid Set cement products by reducing mix water. Add up to 4 packets maximum per 50-lb to 70-lb bag of Rapid Set cement product. FLOW Control may be used with all other Rapid Set® Concrete Pharmacy® products.</p>
    Add to cart
  • CTS Cement – Rapid Set Light Pigment

    Hire
    • Day Rate

      $4.00 / Day
    <h5>Lighten the color of your mixture. Use only with Rapid Set® cement products. Add to concrete, mortar or grout.</h5> <p class="product-blurb">Light is an additive that lightens the color of Rapid Set® cement products. Add up to 4 packets of Light per 50-lb to 70-lb by dry blending Light uniformly into Rapid Set cement products. Light may be used with other Rapid Set® Concrete Pharmacy® products.</p>
    Add to cart
  • CTS Cement – Rapid Set Set Control

    Hire
    • Day Rate

      $3.00 / Day
    <h5>Increases working time. Maintains long-term strength. Use only with Rapid Set® cement products.</h5> <p class="product-blurb">SET Control® is an additive that extends the working and setting time to place and finish Rapid Set® cement products. Use 1 to 4 packets per 50-lb to 70-lb bag of Rapid Set cement products. Set Control may be used with all other Rapid Set® Concrete Pharmacy® products.</p>
    Add to cart
  • Euclid Chemicals – Euco Diamond Hard

    Hire
    • Day Rate

      $140.00$1,100.00 / Day
    Select options
  • Husqvarna – Hiper 3 Bucket

    Hire
    • Day Rate

      $1,202.00 / Day
    Resulting floors will be smooth, shiny and aesthetically pleasing as well as easy to maintain. The final, flat surface, makes it easy to keep your floors clean and it meets current traction/slip requirements (ANSI 137.1). Enhancing the beauty of your concrete floors is as simple as Hiper 3. <strong>HUSQVARNA HIPER 3</strong> Part No. 590587401 <strong>BASIC STEPS:</strong> <ol> <li>Grind with step 1 pads</li> <li>Apply (Chemical A) liquid hardener</li> <li>Polish with step 2 pads</li> <li>Fine polish with step 3 pads</li> <li>Apply (Chemical B) liquid sealer</li> <li>Fine polish again with step 3 pads</li> </ol>
    Add to cart
  • Husqvarna – Hiperguard™

    Hire
    • Day Rate

      $173.00$5,340.00 / Day
    <strong>Hiperguard "Green" </strong>water-based sealer is a premium-grade surface impregnator which is used in the final step of the Hiperfloor process. Hiperguard "Green" water-based penetrates the concrete to form a film along the surface of the capillaries. This increases the surface tension of the floor, restricting the absorption of water, oil, fats and dirt. Stains are kept at the surface level, which simplifies maintenance and cleaning and extends the lifespan of the floor. Hiperguard also helps enhance the colour of the material being sealed. Hiperguard "Green" inpregnator is a ready-to-use product from Husqvarna Construction Products for ceramic, terracotta, all natural and artificial stone, concrete, and terrazzo,  
    Select options
  • Husqvarna – Hiperhard™, Densifier

    Hire
    • Day Rate

      $45.00$2,042.00 / Day
    <strong>Hiperhard™</strong> increases the surface hardness of concrete and enhances the concrete’s abrasion resistance. It reacts with the calcium hydroxide (Free Lime) already found in concrete to form Calcium Silicate – a crystalline structure. Calcium Silicate forms in the surface pores of the concrete, creating a harder surface. The combination of the Calcium Silicate and polishing with a resin-bonded diamond produces a harder floor, an increased abrasion resistance and it significantly impacts the appearance of the final floor.
    Select options