Showing 1–16 of 40 results

  • Buckeye – Clarion 25 AP

    Hire

    • Day Rate

      $109.00 / Day
    Clarion 25 Metal Interlock/No Buff Floor Finish maintains its high gloss with minimal maintenance. Clarion 25 is an extremely durable floor finish that is ideal when there is limited equipment or manpower for a buffing program. Clarion is versatile and may be used on all porous floors. 25% solids. CHEM/B/FLOOR/"CLARION 25"/GLN
    Add to cart

  • CTS Cement – Rapid Set Concrete Leveler Primer

    Hire

    • Day Rate

      $14.00 – $41.00 / Day
    <h5>Ready to use. Increases adhesion. Designed to prevent pinholes and bubbles.</h5> <p class="product-blurb">Concrete Leveler® Primer (CLP) improves the adhesion of Concrete Leveler® to prepared concrete. Using CLP seals porous concrete to prevent pinholes from forming in the finished surface. One quart covers about 50 ft2 to 100 ft2 and one gallon covers about 200 ft2 to 400 ft2.</p>
    Select options

  • CTS Cement – Rapid Set Dark Pigment

    Hire

    • Day Rate

      $4.00 / Day
    <h5>Darken the color of your mixture. Use only with Rapid Set® cement products. Add to concrete, mortar or grout.</h5> <p class="product-blurb">Dark is an additive that darkens the shade of gray color of Rapid Set® cement products. Add up to 4 packets maximum per 50-lb to 70-lb bag by dry blending Dark uniformly into Rapid Set cement products. Dark may be used with all other Rapid Set® Concrete Pharmacy® products.</p>
    Add to cart

  • CTS Cement – Rapid Set Fast Accelerating Additive

    Hire

    • Day Rate

      $4.00 / Day
    <h5>Add in low temperatures. Use only with Rapid Set® cement products. Add to concrete, mortar or grout.</h5> <p class="product-blurb">Fast is an additive that speeds up the setting time of Rapid Set® cement products when experiencing extreme cold weather environments. Add 1 to 5 packets per 50-lb to 70-lb bag of Rapid Set cement product. Fast may be used with all other Rapid Set® Concrete Pharmacy® products.</p>
    Add to cart

  • CTS Cement – Rapid Set Flow Control 2.1 oz

    Hire

    • Day Rate

      $4.00 / Day
    <h5>Increases fluidity or reduces water. Increases compressive strength. Use only with Rapid Set® cement products.</h5> <p class="product-blurb">FLOW Control® is an additive that increases the fluidity of Rapid Set® cement products. FLOW Control can increase compressive strength of Rapid Set cement products by reducing mix water. Add up to 4 packets maximum per 50-lb to 70-lb bag of Rapid Set cement product. FLOW Control may be used with all other Rapid Set® Concrete Pharmacy® products.</p>
    Add to cart

  • CTS Cement – Rapid Set Light Pigment

    Hire

    • Day Rate

      $4.00 / Day
    <h5>Lighten the color of your mixture. Use only with Rapid Set® cement products. Add to concrete, mortar or grout.</h5> <p class="product-blurb">Light is an additive that lightens the color of Rapid Set® cement products. Add up to 4 packets of Light per 50-lb to 70-lb by dry blending Light uniformly into Rapid Set cement products. Light may be used with other Rapid Set® Concrete Pharmacy® products.</p>
    Add to cart

  • CTS Cement – Rapid Set Set Control

    Hire

    • Day Rate

      $3.00 / Day
    <h5>Increases working time. Maintains long-term strength. Use only with Rapid Set® cement products.</h5> <p class="product-blurb">SET Control® is an additive that extends the working and setting time to place and finish Rapid Set® cement products. Use 1 to 4 packets per 50-lb to 70-lb bag of Rapid Set cement products. Set Control may be used with all other Rapid Set® Concrete Pharmacy® products.</p>
    Add to cart

  • CTS Cement – Rapid Set TRU Acrylic Primer 1 Gallon

    Hire

    • Day Rate

      $41.00 / Day
    <h5>Increases adhesion. Designed to prevent pinholes and bubbles. Concentrated formula for increased coverage.</h5> <p class="product-blurb">Acrylic Primer is a concentrated primer to improve the adhesion of Rapid Set® self-leveling flooring products. Acrylic Primer seals porous concrete to prevent pinholes from forming in the finished surface. One gallon covers 400 ft<sup>2</sup> to 600 ft<sup>2</sup> when properly diluted.</p>
    Add to cart

  • Husqvarna – Hiper 3 Bucket

    Hire

    • Day Rate

      $1,202.00 / Day
    Resulting floors will be smooth, shiny and aesthetically pleasing as well as easy to maintain. The final, flat surface, makes it easy to keep your floors clean and it meets current traction/slip requirements (ANSI 137.1). Enhancing the beauty of your concrete floors is as simple as Hiper 3. <strong>HUSQVARNA HIPER 3</strong> Part No. 590587401 <strong>BASIC STEPS:</strong> <ol> <li>Grind with step 1 pads</li> <li>Apply (Chemical A) liquid hardener</li> <li>Polish with step 2 pads</li> <li>Fine polish with step 3 pads</li> <li>Apply (Chemical B) liquid sealer</li> <li>Fine polish again with step 3 pads</li> </ol>
    Add to cart

  • Husqvarna – Hiperguard™

    Hire

    • Day Rate

      $173.00 – $5,340.00 / Day
    <strong>Hiperguard "Green" </strong>water-based sealer is a premium-grade surface impregnator which is used in the final step of the Hiperfloor process. Hiperguard "Green" water-based penetrates the concrete to form a film along the surface of the capillaries. This increases the surface tension of the floor, restricting the absorption of water, oil, fats and dirt. Stains are kept at the surface level, which simplifies maintenance and cleaning and extends the lifespan of the floor. Hiperguard also helps enhance the colour of the material being sealed. Hiperguard "Green" inpregnator is a ready-to-use product from Husqvarna Construction Products for ceramic, terracotta, all natural and artificial stone, concrete, and terrazzo,  
    Select options

  • Key Resin – #200 Flowseal PA

    Hire

    • Day Rate

      $92.00 – $272.80 / Day
    Flowseal PA is a two component, fast curing, UV stable and chemical resistant gloss Polyaspartic/polycarbamide sealer or polycarbamide receiving coating. It provides extended working time compared to traditional Polyaspartic coatings <strong>Uses</strong> Flowseal PA is designed for use as a fast curing UV stable sealer or receiving coat for flakes and quartz broadcast systems. Refer to Flowcrete’s Chemical Resistant Guide or consult Technical Service when selecting for a particular application.
    Select options

  • Key Resin – #467 HS(High Solids) Moist Cured Urethane Sealer

    Hire

    • Day Rate

      $22.90 – $788.20 / Day
    <h5>KEY ADVANTAGES</h5> <ul> <li>Superior abrasion resistance, optional HTS additive available for additional resistance</li> <li>Excellent chemical and stain resistance</li> <li>Hot tire stain resistant</li> <li>Suitable for both exterior and interior applications</li> <li>Low odor for use in occupied areas</li> <li>Meets USGBC LEED criteria for low VOC</li> </ul>
    Select options

  • Key Resin – #502 Primer-Low Modulus Binder

    Hire

    • Day Rate

      $69.00 – $120.30 / Day
    <strong>KEY ADVANTAGES</strong> <ul> <li>Low modulus; stress relieving</li> <li>Fast cure and cold cure formulations available</li> <li>Dampness insensitive cure</li> <li>Conforms to ASTM C-881 properties</li> <li>Low viscosity-good wetting properties</li> <li>Meets USGBC LEED criteria for IEQ</li> </ul>
    Select options

  • Key Resin – #510-CV Cove Base Epoxy Paste

    Hire

    • Day Rate

      $67.90 – $252.60 / Day
    <h4>KEY ADVANTAGES</h4> <ul> <li>Excellent non-sag thixotropic properties when used as binder with Key Cove Base Systems</li> <li>Suitable for use as a vertical grade spackle or filler compound, with or without added aggregate</li> <li>Low odor for use in occupied areas</li> <li>USDA approved for use in food handling applications</li> </ul>
    Select options

  • Key Resin – #510CC Epoxy Binder Cold Cure Pt A Clear 2G

    Hire

    • Day Rate

      $108.10 / Day
    <h5>KEY ADVANTAGES</h5> <ul> <li>Good clarity & color retention</li> <li>Low odor during application & cure - can be applied in occupied buildings</li> <li>Low viscosity - good troweling & wetting properties</li> <li>Meets USGBC LEED criteria for low VOC</li> <li>Meets USDA requirements</li> </ul>
    Add to cart

  • Key Resin – #511 & #511-UV Epoxy Glaze

    Hire

    • Day Rate

      $52.10 – $253.00 / Day
    <h4>KEY ADVANTAGES</h4> <ul> <li>Convenient 2:1 mixing ratio</li> <li>Meets USGBC LEED criteria for low VOC</li> <li>Zero VOC, low odor for use in occupied areas</li> <li>Greater resistance to UV light ambering</li> <li>Low viscosity - good wetting properties</li> <li>Available in "fast cure" formulation</li> <li>Part A Resin compatible with various selected hardeners for general use as a primer, body coat, top coat</li> <li>Meets USDA standards for incidental food contact</li> </ul>
    Select options