Related products

• 

  Ameripolish ColorSolve

  <h4>Features</h4> <ul> <li>Updated formula</li> <li>Leaves no or very little residual dye on surface saving time on cleaning and dye expense</li> <li>Doubles the coverage rate of concrete dyes</li> <li>Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking</li> <li>Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing</li> </ul>

  Select options
• 

  Ameripolish X-Link E WL Surface Sealer

  <h4>Features</h4> <ul> <li>RTU - Ready to use</li> <li>“Wet-Look” finish</li> <li>breathable and fast drying</li> <li>Oil and chemical resistant</li> <li>Non-yellowing stain finish</li> <li>Added mildew and UV protection</li> <li>Ideal for outdoor applications</li> <li>Coverage rate is approximately 500-1000 sq ft per gallon</li> <li>Can be applied to most cementitious surfaces, other unglazed stone, and masonry surfaces</li> </ul>

  Select options
• 

  Ameripolish Rejuvenating Cleaner

  <h4>Features</h4> <ul> <li>Concentrated cleaner that removes daily debris from hard surfaces</li> <li>Contains chemical analogues to SR2 that reinforce stain protection</li> <li>Contains no harsh chemicals</li> <li>Environmentally friendly, biodegradable</li> <li>Easy to use tilt measure bottle</li> <li>Low VOC, VOC compliant</li> <li>Ideal for daily cleaning of polished concrete, terrazzo, epoxy, urethane and other hard surface flooring</li> </ul>

  Select options
• 

  Ameripolish PG-7K Polishable Grout Coating System Part A & B Kit

  Add to quote
• 

  Ameripolish – Color Juice 3D Colorant Concentrate (Part B)

  <h3>Features</h3> <ul> <li>Excellent UV resistance</li> <li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li> <li>Reducing freeze/thaw damage and salt damage</li> <li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li> <li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li> <li>Easily applied with pump sprayer.</li> <li>Horizontal or vertical application.</li> </ul>

  Select options
• 

  Ameripolish – Edge Tint Part B

  <h4>Features</h4> <ul> <li>Available in 22 AmeriPolish coordinating colors</li> <li>Creates uniform edges and borders to eliminate edge work</li> <li>Resists most oil, grease and food stains</li> <li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li> </ul>

  Select options
• 

  Ameripolish Penetrating Agent Plus 30oz

  <h4>Features</h4> <ul> <li>Improves dye penetration</li> <li>Minimizes surface residue and reduces materials waste</li> <li>Very easy to use, just add 4oz to a premixed gallon of dye</li> <li>Extends the drying time of Ameripolish solvent-based dyes</li> <li>Can be used on most cementious surfaces</li> <li>Ideal for very dense or hard concrete where normal dye will not penetrate</li> <li>Comes in a convenient and easy container that helps you mix the right ratio every time</li> </ul>

  Add to quote
• 

  Ameripolish 3D SP

  <h5>Features</h5> <ul> <li>RTU - Ready to use</li> <li>UV stabilizers help protect against fading</li> <li>Creates water resistant barrier to prevent staining, etching, and protect color</li> <li>3D SP is a color enhancer for polish concrete floors with dye</li> <li>Low VOC</li> <li>Contains 3D densifier properties to aid in hardening and dust proofing</li> <li>Coverage rate is approximately 2,000 - 2,500 sq ft per gallon</li> </ul>

  Select options