<h4>Features</h4>
<ul>
<li>Available in 22 AmeriPolish coordinating colors</li>
<li>Creates uniform edges and borders to eliminate edge work</li>
<li>Resists most oil, grease and food stains</li>
<li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Improves cure by retaining slab moisture</li>
<li>High penetrating, non film forming</li>
<li>Forms hydrophobic barrier to increase stain repellancy</li>
<li>Improves scratch and abrasion resistance</li>
<li>Reduces efflorescence and minimizes dust for healthier indoor air quality</li>
<li>Replaces traditional Cure & Seal products on new concrete</li>
<li>Coverage rate is approximately 1,000 - 1,500 sq ft per gallon</li>
</ul>
Select options
<h3>Features</h3>
<ul>
<li>Excellent UV resistance</li>
<li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li>
<li>Reducing freeze/thaw damage and salt damage</li>
<li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li>
<li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li>
<li>Easily applied with pump sprayer.</li>
<li>Horizontal or vertical application.</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Great alternative where solvent based products are not applicable</li>
<li>Economical penetrating sealer alternative</li>
<li>Non-topical penetrating sealer</li>
<li>Treated surfaces 'breathe' and do not trap moisture</li>
<li>Excellent stain repellency for residential, commercial, and even industrial applications</li>
<li>Extreme hydrophobic and oil phobic characteristics for maximum stain resistance</li>
<li>Coverage rate is approximately 2,000 - 3,000 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Opens the concrete to prepare it for penetrating agents</li>
<li>Safe for interior and exterior environments</li>
<li>Biodegradable, low odor, and non-flammable</li>
<li>Can be used safety on new or restoration construction, industrial facilities, commercial spaces, food packaging facilities, and residential areas</li>
<li>Coverage rate is approximately 200 - 400 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Safely remove or ligthens oil stains from most surfaces</li>
<li>Stops oil from continually wicking to the surface</li>
<li>Does not damage colorants, sealers, or stain protectors</li>
<li>Will not etch polished concrete</li>
<li>Biodegradable, environmentally safe, and VOC compliant</li>
<li>Works best above 55ºF</li>
<li>Coverage rate is approximately 400-600 sq ft per gallon</li>
</ul>
Select options
<h4>Highlights</h4>
<ul>
<li>Ready to use and comes with hand sprayer</li>
<li>Biodegradable</li>
<li>Nonhazardous</li>
<li>Will not harm chrome, rubber and most other surfaces when used according to directions</li>
<li>Many uses - concrete forms, concrete and mortar mixers, hand tools, precast equipment, ready-mix trucks, saw-cutting equipment, screeds, power trowels</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>RTU - Ready to use</li>
<li>“Wet-Look” finish</li>
<li>breathable and fast drying</li>
<li>Oil and chemical resistant</li>
<li>Non-yellowing stain finish</li>
<li>Added mildew and UV protection</li>
<li>Ideal for outdoor applications</li>
<li>Coverage rate is approximately 500-1000 sq ft per gallon</li>
<li>Can be applied to most cementitious surfaces, other unglazed stone, and masonry surfaces</li>
</ul>
Select options