<h4>Highlights</h4>
<ul>
<li>Penetrates, doesn't leave oily film</li>
<li>V.O.C. compliant / low odor</li>
<li>Environmentally safe and water soluble</li>
<li>Non-staining and non-dusting</li>
<li>Meets Army Corp. of Engineers specs</li>
<li>Can be used as a rust inhibitor</li>
<li>Safe for use on most surfaces</li>
<li>Will not rinse off in rain</li>
<li>Economical concentrate</li>
<li>Concentrate reduces shipping cost</li>
<li>Easy to mix and apply, suggested mix ratios vary with applications</li>
<li>Virtually non-stick</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Concentrated cleaner that removes daily debris from hard surfaces</li>
<li>Contains chemical analogues to SR2 that reinforce stain protection</li>
<li>Contains no harsh chemicals</li>
<li>Environmentally friendly, biodegradable</li>
<li>Easy to use tilt measure bottle</li>
<li>Low VOC, VOC compliant</li>
<li>Ideal for daily cleaning of polished concrete, terrazzo, epoxy, urethane and other hard surface flooring</li>
</ul>
Select options
<h4>Highlights</h4>
<ul>
<li>Ready to use and comes with hand sprayer</li>
<li>Biodegradable</li>
<li>Nonhazardous</li>
<li>Will not harm chrome, rubber and most other surfaces when used according to directions</li>
<li>Many uses - concrete forms, concrete and mortar mixers, hand tools, precast equipment, ready-mix trucks, saw-cutting equipment, screeds, power trowels</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Opens the concrete to prepare it for penetrating agents</li>
<li>Safe for interior and exterior environments</li>
<li>Biodegradable, low odor, and non-flammable</li>
<li>Can be used safety on new or restoration construction, industrial facilities, commercial spaces, food packaging facilities, and residential areas</li>
<li>Coverage rate is approximately 200 - 400 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Available in 22 AmeriPolish coordinating colors</li>
<li>Creates uniform edges and borders to eliminate edge work</li>
<li>Resists most oil, grease and food stains</li>
<li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li>
</ul>
Select options
<h5>Features</h5>
<ul>
<li>Solvent-based, mixes with acetone, available in 22 colors</li>
<li>Colors penetrate the surface and never wear off</li>
<li>Will not grind off during resin-grinding stages of polished concrete</li>
<li>Coordinate with AmeriPolish Edge Tints for a seamless wall-to-wall floor solution</li>
<li>For indoor use only</li>
<li>Coverage rate is approximately 400-700 sq ft per gallon</li>
</ul>
Originally designed specifically for polished and exposed concrete, the AmeriPolish Classic dyes penetrate into the surface of the concrete slab for extremely long lasting color that will not wear from daily usage. Classic dyes can be used as a base color or touch up for concrete that has received integral color, dry shake hardenrs, acid stains, or even layered to create a truly unique, mottled effect.
Select options
<h4>Features</h4>
<ul>
<li>RTU - Ready to use</li>
<li>“Wet-Look” finish</li>
<li>breathable and fast drying</li>
<li>Oil and chemical resistant</li>
<li>Non-yellowing stain finish</li>
<li>Added mildew and UV protection</li>
<li>Ideal for outdoor applications</li>
<li>Coverage rate is approximately 500-1000 sq ft per gallon</li>
<li>Can be applied to most cementitious surfaces, other unglazed stone, and masonry surfaces</li>
</ul>
Select options
Loading...
Reload document 
Open in new tab 
