Related products

• 

  Ameripolish X Link WB Surface Sealer

  <h4>Features</h4> <ul> <li>RTU - Ready to use</li> <li>Breathable and fast drying</li> <li>Oil and chemical resistant</li> <li>Non-yellowing stain finish</li> <li>Added mildew and UV protection</li> <li>Ideal for indoor and outdoor applications</li> <li>Available in 'Wet Look' or stain finishes</li> <li>Coverage rate is approximately 300-500 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish SureLock Dye

  <h4>Features</h4> <ul> <li>Updated formula</li> <li>Most vibrant concrete dye Ameripolish has ever produced</li> <li>Mixes with water or acetone and is VOC compliant</li> <li>Consistent, rich penetrating color with UV stabalizers prevent fading</li> <li>Surelock is to be applied just before densifying with 3D HS or HSL</li> <li>Liquid concentrate eliminates the three hour wait to dissolve dye required by other products</li> <li>For indoor use only</li> <li>Coverage rate is approximately 400-700 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish EZ Etch

  <h4>Features</h4> <ul> <li>Opens the concrete to prepare it for penetrating agents</li> <li>Safe for interior and exterior environments</li> <li>Biodegradable, low odor, and non-flammable</li> <li>Can be used safety on new or restoration construction, industrial facilities, commercial spaces, food packaging facilities, and residential areas</li> <li>Coverage rate is approximately 200 - 400 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish 3D SP

  <h5>Features</h5> <ul> <li>RTU - Ready to use</li> <li>UV stabilizers help protect against fading</li> <li>Creates water resistant barrier to prevent staining, etching, and protect color</li> <li>3D SP is a color enhancer for polish concrete floors with dye</li> <li>Low VOC</li> <li>Contains 3D densifier properties to aid in hardening and dust proofing</li> <li>Coverage rate is approximately 2,000 - 2,500 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish Oil Ingester System

  <h4>Features</h4> <ul> <li>Safely remove or ligthens oil stains from most surfaces</li> <li>Stops oil from continually wicking to the surface</li> <li>Does not damage colorants, sealers, or stain protectors</li> <li>Will not etch polished concrete</li> <li>Biodegradable, environmentally safe, and VOC compliant</li> <li>Works best above 55ºF</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish X-Link E WL Surface Sealer

  <h4>Features</h4> <ul> <li>RTU - Ready to use</li> <li>“Wet-Look” finish</li> <li>breathable and fast drying</li> <li>Oil and chemical resistant</li> <li>Non-yellowing stain finish</li> <li>Added mildew and UV protection</li> <li>Ideal for outdoor applications</li> <li>Coverage rate is approximately 500-1000 sq ft per gallon</li> <li>Can be applied to most cementitious surfaces, other unglazed stone, and masonry surfaces</li> </ul>

  Select options
• 

  Ameripolish ColorSolve

  <h4>Features</h4> <ul> <li>Updated formula</li> <li>Leaves no or very little residual dye on surface saving time on cleaning and dye expense</li> <li>Doubles the coverage rate of concrete dyes</li> <li>Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking</li> <li>Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing</li> </ul>

  Select options
• 

  Ameripolish PG-7K Polishable Grout Coating System Part A & B Kit

  Add to quote