<h5>Features</h5>
<ul>
<li>RTU - Ready to use</li>
<li>UV stabilizers help protect against fading</li>
<li>Creates water resistant barrier to prevent staining, etching, and protect color</li>
<li>3D SP is a color enhancer for polish concrete floors with dye</li>
<li>Low VOC</li>
<li>Contains 3D densifier properties to aid in hardening and dust proofing</li>
<li>Coverage rate is approximately 2,000 - 2,500 sq ft per gallon</li>
</ul>
Select options
<h5>Features</h5>
<ul>
<li>Hardens deep within the slab to improve durability even after grinding</li>
<li>Contains UV stabalizers to help protect color from fading</li>
<li>Ideal for new construction, existing concrete, and diamond pad burnishing</li>
<li>Enhances polished color, gloss and clarity</li>
<li>Provides superior stain resistance especially when combined with SR2 Sealer</li>
<li>Coverage rate is approximately 600 - 800 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Improves dye penetration</li>
<li>Minimizes surface residue and reduces materials waste</li>
<li>Very easy to use, just add 4oz to a premixed gallon of dye</li>
<li>Extends the drying time of Ameripolish solvent-based dyes</li>
<li>Can be used on most cementious surfaces</li>
<li>Ideal for very dense or hard concrete where normal dye will not penetrate</li>
<li>Comes in a convenient and easy container that helps you mix the right ratio every time</li>
</ul>
Add to quote
<h4>Features</h4>
<ul>
<li>Available in 22 AmeriPolish coordinating colors</li>
<li>Creates uniform edges and borders to eliminate edge work</li>
<li>Resists most oil, grease and food stains</li>
<li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li>
</ul>
Add to quote
<h4>Features</h4>
<ul>
<li>Excellent UV resistance</li>
<li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li>
<li>Reducing freeze/thaw damage and salt damage</li>
<li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li>
<li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li>
<li>Easily applied with pump sprayer.</li>
<li>Horizontal or vertical application.</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Great alternative where solvent based products are not applicable</li>
<li>Economical penetrating sealer alternative</li>
<li>Non-topical penetrating sealer</li>
<li>Treated surfaces 'breathe' and do not trap moisture</li>
<li>Excellent stain repellency for residential, commercial, and even industrial applications</li>
<li>Extreme hydrophobic and oil phobic characteristics for maximum stain resistance</li>
<li>Coverage rate is approximately 2,000 - 3,000 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Updated formula</li>
<li>Leaves no or very little residual dye on surface saving time on cleaning and dye expense</li>
<li>Doubles the coverage rate of concrete dyes</li>
<li>Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking</li>
<li>Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing</li>
</ul>
Select options
Loading...
Reload document 
Open in new tab 
