<h3>Features</h3>
<ul>
<li>Excellent UV resistance</li>
<li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li>
<li>Reducing freeze/thaw damage and salt damage</li>
<li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li>
<li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li>
<li>Easily applied with pump sprayer.</li>
<li>Horizontal or vertical application.</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Concentrated cleaner that removes daily debris from hard surfaces</li>
<li>Contains chemical analogues to SR2 that reinforce stain protection</li>
<li>Contains no harsh chemicals</li>
<li>Environmentally friendly, biodegradable</li>
<li>Easy to use tilt measure bottle</li>
<li>Low VOC, VOC compliant</li>
<li>Ideal for daily cleaning of polished concrete, terrazzo, epoxy, urethane and other hard surface flooring</li>
</ul>
Add to quote
<h4>Features</h4>
<ul>
<li>Updated formula</li>
<li>Most vibrant concrete dye Ameripolish has ever produced</li>
<li>Mixes with water or acetone and is VOC compliant</li>
<li>Consistent, rich penetrating color with UV stabalizers prevent fading</li>
<li>Surelock is to be applied just before densifying with 3D HS or HSL</li>
<li>Liquid concentrate eliminates the three hour wait to dissolve dye required by other products</li>
<li>For indoor use only</li>
<li>Coverage rate is approximately 400-700 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Grind-free sealer removal</li>
<li>Formulated specifically to remove WB Surface Sealer, SureLock Stain Shield, and 3D SP</li>
<li>Safely remove an improperly installed 'guard' type product to reinstall correctly</li>
<li>Ideal for preparation prior to dye reapplication</li>
<li>Coverage rate is approximately 400-600 sq ft per gallon</li>
</ul>
Add to quote
<h4>Features</h4>
<ul>
<li>RTU - Ready to use</li>
<li>Breathable and fast drying</li>
<li>Oil and chemical resistant</li>
<li>Non-yellowing stain finish</li>
<li>Added mildew and UV protection</li>
<li>Ideal for indoor and outdoor applications</li>
<li>Available in 'Wet Look' or stain finishes</li>
<li>Coverage rate is approximately 300-500 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Available in 22 AmeriPolish coordinating colors</li>
<li>Creates uniform edges and borders to eliminate edge work</li>
<li>Resists most oil, grease and food stains</li>
<li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li>
</ul>
Select options
<h4>Highlights</h4>
<ul>
<li>Penetrates, doesn't leave oily film</li>
<li>V.O.C. compliant / low odor</li>
<li>Environmentally safe and water soluble</li>
<li>Non-staining and non-dusting</li>
<li>Meets Army Corp. of Engineers specs</li>
<li>Can be used as a rust inhibitor</li>
<li>Safe for use on most surfaces</li>
<li>Will not rinse off in rain</li>
<li>Economical concentrate</li>
<li>Concentrate reduces shipping cost</li>
<li>Easy to mix and apply, suggested mix ratios vary with applications</li>
<li>Virtually non-stick</li>
</ul>
Select options