Hire
-
Day Rate
$60.00 – $14,250.00 / Day
-
-
<h5>Features</h5>
<ul>
<li>RTU - Ready to use</li>
<li>UV stabilizers help protect against fading</li>
<li>Creates water resistant barrier to prevent staining, etching, and protect color</li>
<li>3D SP is a color enhancer for polish concrete floors with dye</li>
<li>Low VOC</li>
<li>Contains 3D densifier properties to aid in hardening and dust proofing</li>
<li>Coverage rate is approximately 2,000 - 2,500 sq ft per gallon</li>
</ul>
Select options
Hire
-
Day Rate
$42.51 – $10,292.00 / Day
-
-
<h4>Features</h4>
<ul>
<li>Breathable barrier prevents staining and seals out moisture</li>
<li>Protects color from UV degradation</li>
<li>Non-yellowing finish will not peel, crack, blister, or blush</li>
<li>Environmentally safe, low VOCs</li>
<li>Coverage rate is approximately 300-600 sq ft per gallon</li>
</ul>
Select options
Hire
-
Day Rate
$228.00 – $10,788.00 / Day
-
-
<h4>Features</h4>
<ul>
<li>Improves cure by retaining slab moisture</li>
<li>High penetrating, non film forming</li>
<li>Forms hydrophobic barrier to increase stain repellancy</li>
<li>Improves scratch and abrasion resistance</li>
<li>Reduces efflorescence and minimizes dust for healthier indoor air quality</li>
<li>Replaces traditional Cure & Seal products on new concrete</li>
<li>Coverage rate is approximately 1,000 - 1,500 sq ft per gallon</li>
</ul>
Select options
Hire
-
Day Rate
$27.50 – $137.50 / Day
-
-
<h4>Features</h4>
<ul>
<li>Excellent UV resistance</li>
<li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li>
<li>Reducing freeze/thaw damage and salt damage</li>
<li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li>
<li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li>
<li>Easily applied with pump sprayer.</li>
<li>Horizontal or vertical application.</li>
</ul>
Select options
Hire
-
Day Rate
$8.50 – $225.00 / Day
-
-
<h4>Features</h4>
<ul>
<li>Updated formula</li>
<li>Most vibrant concrete dye Ameripolish has ever produced</li>
<li>Mixes with water or acetone and is VOC compliant</li>
<li>Consistent, rich penetrating color with UV stabalizers prevent fading</li>
<li>Surelock is to be applied just before densifying with 3D HS or HSL</li>
<li>Liquid concentrate eliminates the three hour wait to dissolve dye required by other products</li>
<li>For indoor use only</li>
<li>Coverage rate is approximately 400-700 sq ft per gallon</li>
</ul>
Select options
Hire
-
Day Rate
$45.00 – $225.00 / Day
-
-
<h3>Features</h3>
<ul>
<li>Excellent UV resistance</li>
<li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li>
<li>Reducing freeze/thaw damage and salt damage</li>
<li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li>
<li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li>
<li>Easily applied with pump sprayer.</li>
<li>Horizontal or vertical application.</li>
</ul>
Select options
Hire
-
Day Rate
$8.50 – $250.00 / Day
-
-
<h5>Features</h5>
<ul>
<li>Solvent-based, mixes with acetone, available in 22 colors</li>
<li>Colors penetrate the surface and never wear off</li>
<li>Will not grind off during resin-grinding stages of polished concrete</li>
<li>Coordinate with AmeriPolish Edge Tints for a seamless wall-to-wall floor solution</li>
<li>For indoor use only</li>
<li>Coverage rate is approximately 400-700 sq ft per gallon</li>
</ul>
Originally designed specifically for polished and exposed concrete, the AmeriPolish Classic dyes penetrate into the surface of the concrete slab for extremely long lasting color that will not wear from daily usage. Classic dyes can be used as a base color or touch up for concrete that has received integral color, dry shake hardenrs, acid stains, or even layered to create a truly unique, mottled effect.
Select options