The POLISHED® COLLECTION is ultra-fine particles contained within each blend create interstitial spaces where in the underlying tinted base coat remains semi-visible throughout a full broadcast application of the POLISHED® blend. As a result, POLISHED® colored particles cooperate with the underlying tinted base coat to promote the overall color, shade, and randomized particulate pattern of the resulting resinous floor coating. Fundamentally, greys and tans are the most common customer preferred colors for resinous flooring applications. Once the general color has been selected (grey or tan), the next intuitive customer choice is whether the shade of grey or tan should be light or dark. Finally, customers may consider adding solid accent colors to arrive at a more personalized flooring solution. Polished® blends cooperate with tinted base coats to make primary floor color, shade, and accent options simple and efficient.
Chips Unlimited 1/4inch Flake 10lbs box – Polished Collection
-
$40.00
Coverage: 10-13sqft per lbs of flake
ADVANTAGES
- DECORATIVE
- UNLIMITED COLORS AND BLENDS
- STRIPED PATTERNS AVAILABLE
- MULTIPLE SIZES
- CUSTOMIZABLE
- FLAT SURFACE / THIN PROFILE
- FIRE RESISTANT
- RESISTANT TO UV DEGRADATION
- WATER-BASED CHEMISTRY
- ABSORBENT
- LOOSE IN CARTON
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
TDS
Loading...
Reload document 
Open in new tab FB Product Number
| COAT40103 | Polished WhiteStone-BP1410-1/4 inch Flake |
| COAT40104 | Polished GreyStone-BP1413-1/4 inch Flake |
| COAT40105 | Polished FlintStone-BP1415-1/4 inch Flake |
| COAT40106 | Polished GemStone-BP1417-1/4 inch Flake |
| COAT40107 | Polished BlackStone-BP1419-1/4 inch Flake |
| COAT40108 | Polished BlueStone-BP1420-1/4 inch Flake |
Related products
-
Wagman Eco Coat
Hire
-
Day Rate
$86.00 – $383.00 / Day
<h4>Highlights</h4> <ul> <li>Penetrates, doesn't leave oily film</li> <li>V.O.C. compliant / low odor</li> <li>Environmentally safe and water soluble</li> <li>Non-staining and non-dusting</li> <li>Meets Army Corp. of Engineers specs</li> <li>Can be used as a rust inhibitor</li> <li>Safe for use on most surfaces</li> <li>Will not rinse off in rain</li> <li>Economical concentrate</li> <li>Concentrate reduces shipping cost</li> <li>Easy to mix and apply, suggested mix ratios vary with applications</li> <li>Virtually non-stick</li> </ul>Select options -
-
Ameripolish – Edge Tint Part A
Hire
-
Day Rate
$55.00 / Day
<h4>Features</h4> <ul> <li>Available in 22 AmeriPolish coordinating colors</li> <li>Creates uniform edges and borders to eliminate edge work</li> <li>Resists most oil, grease and food stains</li> <li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li> </ul>Add to cart -
-
Ameripolish – Strip & Clean 1 Gallon RTU Ships Hazmat-Fedex Ground or LTL
Hire
-
Day Rate
$45.00 / Day
<h4>Features</h4> <ul> <li>Grind-free sealer removal</li> <li>Formulated specifically to remove WB Surface Sealer, SureLock Stain Shield, and 3D SP</li> <li>Safely remove an improperly installed 'guard' type product to reinstall correctly</li> <li>Ideal for preparation prior to dye reapplication</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>Add to cart -
-
Ameripolish ColorSolve
Hire
-
Day Rate
$55.00 – $2,141.00 / Day
<h4>Features</h4> <ul> <li>Updated formula</li> <li>Leaves no or very little residual dye on surface saving time on cleaning and dye expense</li> <li>Doubles the coverage rate of concrete dyes</li> <li>Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking</li> <li>Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing</li> </ul>Select options -
-
Ameripolish AquaShield
Hire
-
Day Rate
$123.60 – $6,180.00 / Day
<h5>Features</h5> <ul> <li>Ideal for use on any concrete or masonry surface indoor or outdoor</li> <li>Extremely long-lasting</li> <li>Water based, fast drying</li> <li>Low VOC and non flammablet</li> <li>Coverage rate is approximately 400-2,000 sq ft per gallon</li> </ul>Select options -
-
Ameripolish PG-7K Polishable Grout Coating System Part A & B Kit
Hire
-
Day Rate
$105.00 / Day
Add to cart -
-
Ameripolish – Color Juice 3D Sample Size
Hire
-
Day Rate
$8.50 / Day
<h3>FEATURES</h3> <ul> <li>Created for outdoor use but can be used indoors</li> <li>Fast, easy application</li> <li>Available in 14 colors</li> <li>Water based and UV stable</li> <li>Low VOC</li> <li>Must be used with EZ Etch Concrete Surface Etching Agent and X-Link WB Surface Sealer</li> <li>Coverage rate is approximately 400-800 sq ft per gallon</li> </ul>Select options -
-
Ameripolish PCA Curing Agent
Hire
-
Day Rate
$199.00 – $9,499.00 / Day
<h4>Features</h4> <ul> <li>Improves cure by retaining slab moisture</li> <li>High penetrating, non film forming</li> <li>Forms hydrophobic barrier to increase stain repellancy</li> <li>Improves scratch and abrasion resistance</li> <li>Reduces efflorescence and minimizes dust for healthier indoor air quality</li> <li>Replaces traditional Cure & Seal products on new concrete</li> <li>Coverage rate is approximately 1,000 - 1,500 sq ft per gallon</li> </ul>Select options -
