Twelve AGM 180-amp hour batteries, compact design, hydraulic steering, and a Dual-lift front end make this scraper a powerhouse. The dual-lift feature on the front of the machine, enables the operator to make infinite adjustments to the blade angle and pitch without leaving the seat.
-
- To increase the versatility of your machine, try National’s 1-inch Blades.
- These are designed specifically for VCT removal and adhesive removal.
- 1-inch blades do need to be used in a Razor Blade Cutting Head. Pair the length of the blade you choose to the length of the cutting head when possible
- An additional feature that can be added to our classic Rider are a set of lifting arms. These steel arms are built into the frame and offer 3 points of contact for moving the machine via chains.
- To increase the versatility of your machine, try National’s 1-inch Blades.
| Power Supply | Battery | |
| Width* | 24.5″ | 62 cm |
| Height | 50″ | 127 cm |
| Length* | 63″ | 160 cm |
| Weight | 2,407 lb | 1,091 kg |
| Removable Weight | 185 lb front | 84 kg |
| Weight (machine only) | 2,222 lb | 1,007 kg |
| Speed | up to 120 ft/min | up to 36.6 m/min |
| Voltage | 115 | 230 |
| Frequency | 60 Hz | 50 Hz |
| * Measurements are without tooling attached | ||
Reload document 
Open in new tab 
