Additional information
| Weight | N/A |
|---|
Metzger/McGuire MM Armor-Hard Aggregates Only 37 lbs
Available colors:
- Aggregate – DoveTail Gray
- Aggregate – Porpoise
- Aggregate – Brick Red
- Aggregate – Standard Gray
- Aggregate – Natural
FB Product Number
| JTRP00948 | MM Armor-Hard Aggregates Only 37 lb – DoveTail Gray |
| JTRP00949 | MM Armor-Hard Aggregates Only 37 lb – Porpoise |
| JTRP00950 | MM Armor-Hard Aggregates Only 37 lb – Brick Red |
| JTRP00951 | MM Armor-Hard Aggregates Only 37 lb – Standard Gray |
| JTRP00952 | MM Armor-Hard Aggregates Only 37 lb – Natural |
Related products
-
-
Ameripolish Oil Ingester System
<h4>Features</h4> <ul> <li>Safely remove or ligthens oil stains from most surfaces</li> <li>Stops oil from continually wicking to the surface</li> <li>Does not damage colorants, sealers, or stain protectors</li> <li>Will not etch polished concrete</li> <li>Biodegradable, environmentally safe, and VOC compliant</li> <li>Works best above 55ºF</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>Select options -
Ameripolish ColorSolve
<h4>Features</h4> <ul> <li>Updated formula</li> <li>Leaves no or very little residual dye on surface saving time on cleaning and dye expense</li> <li>Doubles the coverage rate of concrete dyes</li> <li>Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking</li> <li>Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing</li> </ul>Select options -
Ameripolish AquaShield
<h5>Features</h5> <ul> <li>Ideal for use on any concrete or masonry surface indoor or outdoor</li> <li>Extremely long-lasting</li> <li>Water based, fast drying</li> <li>Low VOC and non flammablet</li> <li>Coverage rate is approximately 400-2,000 sq ft per gallon</li> </ul>Select options -
Ameripolish – Color Juice 3D Sample Size
<h3>FEATURES</h3> <ul> <li>Created for outdoor use but can be used indoors</li> <li>Fast, easy application</li> <li>Available in 14 colors</li> <li>Water based and UV stable</li> <li>Low VOC</li> <li>Must be used with EZ Etch Concrete Surface Etching Agent and X-Link WB Surface Sealer</li> <li>Coverage rate is approximately 400-800 sq ft per gallon</li> </ul>Select options -
Ameripolish Rejuvenating Cleaner
<h4>Features</h4> <ul> <li>Concentrated cleaner that removes daily debris from hard surfaces</li> <li>Contains chemical analogues to SR2 that reinforce stain protection</li> <li>Contains no harsh chemicals</li> <li>Environmentally friendly, biodegradable</li> <li>Easy to use tilt measure bottle</li> <li>Low VOC, VOC compliant</li> <li>Ideal for daily cleaning of polished concrete, terrazzo, epoxy, urethane and other hard surface flooring</li> </ul>Select options -
Color Juice 3D Hardener (Part A)
<h4>Features</h4> <ul> <li>Excellent UV resistance</li> <li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li> <li>Reducing freeze/thaw damage and salt damage</li> <li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li> <li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li> <li>Easily applied with pump sprayer.</li> <li>Horizontal or vertical application.</li> </ul>Select options -
Ameripolish 3D SP
<h5>Features</h5> <ul> <li>RTU - Ready to use</li> <li>UV stabilizers help protect against fading</li> <li>Creates water resistant barrier to prevent staining, etching, and protect color</li> <li>3D SP is a color enhancer for polish concrete floors with dye</li> <li>Low VOC</li> <li>Contains 3D densifier properties to aid in hardening and dust proofing</li> <li>Coverage rate is approximately 2,000 - 2,500 sq ft per gallon</li> </ul>Select options