Related products

• 

  Ameripolish 3D HSL Concrete Densifier

  <h5>Features</h5> <ul> <li>Hardens deep within the slab to improve durability even after grinding</li> <li>Contains UV stabalizers to help protect color from fading</li> <li>Ideal for new construction, existing concrete, and diamond pad burnishing</li> <li>Enhances polished color, gloss and clarity</li> <li>Provides superior stain resistance especially when combined with SR2 Sealer</li> <li>Coverage rate is approximately 600 - 800 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish Classic Dye

  <h5>Features</h5> <ul> <li>Solvent-based, mixes with acetone, available in 22 colors</li> <li>Colors penetrate the surface and never wear off</li> <li>Will not grind off during resin-grinding stages of polished concrete</li> <li>Coordinate with AmeriPolish Edge Tints for a seamless wall-to-wall floor solution</li> <li>For indoor use only</li> <li>Coverage rate is approximately 400-700 sq ft per gallon</li> </ul> Originally designed specifically for polished and exposed concrete, the AmeriPolish Classic dyes penetrate into the surface of the concrete slab for extremely long lasting color that will not wear from daily usage. Classic dyes can be used as a base color or touch up for concrete that has received integral color, dry shake hardenrs, acid stains, or even layered to create a truly unique, mottled effect.

  Select options
• 

  Ameripolish – Color Juice 3D Sample Size

  <h3>FEATURES</h3> <ul> <li>Created for outdoor use but can be used indoors</li> <li>Fast, easy application</li> <li>Available in 14 colors</li> <li>Water based and UV stable</li> <li>Low VOC</li> <li>Must be used with EZ Etch Concrete Surface Etching Agent and X-Link WB Surface Sealer</li> <li>Coverage rate is approximately 400-800 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish AquaShield

  <h5>Features</h5> <ul> <li>Ideal for use on any concrete or masonry surface indoor or outdoor</li> <li>Extremely long-lasting</li> <li>Water based, fast drying</li> <li>Low VOC and non flammablet</li> <li>Coverage rate is approximately 400-2,000 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish – Strip & Clean 1 Gallon RTU Ships Hazmat-Fedex Ground or LTL

  <h4>Features</h4> <ul> <li>Grind-free sealer removal</li> <li>Formulated specifically to remove WB Surface Sealer, SureLock Stain Shield, and 3D SP</li> <li>Safely remove an improperly installed 'guard' type product to reinstall correctly</li> <li>Ideal for preparation prior to dye reapplication</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>

  Add to quote
• 

  Ameripolish X Link WB Surface Sealer

  <h4>Features</h4> <ul> <li>RTU - Ready to use</li> <li>Breathable and fast drying</li> <li>Oil and chemical resistant</li> <li>Non-yellowing stain finish</li> <li>Added mildew and UV protection</li> <li>Ideal for indoor and outdoor applications</li> <li>Available in 'Wet Look' or stain finishes</li> <li>Coverage rate is approximately 300-500 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish ColorSolve

  <h4>Features</h4> <ul> <li>Updated formula</li> <li>Leaves no or very little residual dye on surface saving time on cleaning and dye expense</li> <li>Doubles the coverage rate of concrete dyes</li> <li>Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking</li> <li>Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing</li> </ul>

  Select options
• 

  Ameripolish Penetrating Agent Plus 30oz

  <h4>Features</h4> <ul> <li>Improves dye penetration</li> <li>Minimizes surface residue and reduces materials waste</li> <li>Very easy to use, just add 4oz to a premixed gallon of dye</li> <li>Extends the drying time of Ameripolish solvent-based dyes</li> <li>Can be used on most cementious surfaces</li> <li>Ideal for very dense or hard concrete where normal dye will not penetrate</li> <li>Comes in a convenient and easy container that helps you mix the right ratio every time</li> </ul>

  Add to quote