<h4>Features</h4>
<ul>
<li>Available in 22 AmeriPolish coordinating colors</li>
<li>Creates uniform edges and borders to eliminate edge work</li>
<li>Resists most oil, grease and food stains</li>
<li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li>
</ul>
Select options
Hire
-
Day Rate
$86.00 – $383.00 / Day
-
-
<h4>Highlights</h4>
<ul>
<li>Penetrates, doesn't leave oily film</li>
<li>V.O.C. compliant / low odor</li>
<li>Environmentally safe and water soluble</li>
<li>Non-staining and non-dusting</li>
<li>Meets Army Corp. of Engineers specs</li>
<li>Can be used as a rust inhibitor</li>
<li>Safe for use on most surfaces</li>
<li>Will not rinse off in rain</li>
<li>Economical concentrate</li>
<li>Concentrate reduces shipping cost</li>
<li>Easy to mix and apply, suggested mix ratios vary with applications</li>
<li>Virtually non-stick</li>
</ul>
Select options
Hire
-
Day Rate
$42.51 – $10,292.00 / Day
-
-
<h4>Features</h4>
<ul>
<li>Breathable barrier prevents staining and seals out moisture</li>
<li>Protects color from UV degradation</li>
<li>Non-yellowing finish will not peel, crack, blister, or blush</li>
<li>Environmentally safe, low VOCs</li>
<li>Coverage rate is approximately 300-600 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Grind-free sealer removal</li>
<li>Formulated specifically to remove WB Surface Sealer, SureLock Stain Shield, and 3D SP</li>
<li>Safely remove an improperly installed 'guard' type product to reinstall correctly</li>
<li>Ideal for preparation prior to dye reapplication</li>
<li>Coverage rate is approximately 400-600 sq ft per gallon</li>
</ul>
Add to cart
Hire
-
Day Rate
$43.00 – $10,705.00 / Day
-
-
<h4>Features</h4>
<ul>
<li>RTU - Ready to use</li>
<li>“Wet-Look” finish</li>
<li>breathable and fast drying</li>
<li>Oil and chemical resistant</li>
<li>Non-yellowing stain finish</li>
<li>Added mildew and UV protection</li>
<li>Ideal for outdoor applications</li>
<li>Coverage rate is approximately 500-1000 sq ft per gallon</li>
<li>Can be applied to most cementitious surfaces, other unglazed stone, and masonry surfaces</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Improves dye penetration</li>
<li>Minimizes surface residue and reduces materials waste</li>
<li>Very easy to use, just add 4oz to a premixed gallon of dye</li>
<li>Extends the drying time of Ameripolish solvent-based dyes</li>
<li>Can be used on most cementious surfaces</li>
<li>Ideal for very dense or hard concrete where normal dye will not penetrate</li>
<li>Comes in a convenient and easy container that helps you mix the right ratio every time</li>
</ul>
Add to cart
<h3>FEATURES</h3>
<ul>
<li>Created for outdoor use but can be used indoors</li>
<li>Fast, easy application</li>
<li>Available in 14 colors</li>
<li>Water based and UV stable</li>
<li>Low VOC</li>
<li>Must be used with EZ Etch Concrete Surface Etching Agent and X-Link WB Surface Sealer</li>
<li>Coverage rate is approximately 400-800 sq ft per gallon</li>
</ul>
Select options
Hire
-
Day Rate
$114.00 – $5,678.00 / Day
-
-
<h5>Features</h5>
<ul>
<li>Hardens deep within the slab to improve durability even after grinding</li>
<li>Contains UV stabalizers to help protect color from fading</li>
<li>Ideal for new construction, existing concrete, and diamond pad burnishing</li>
<li>Enhances polished color, gloss and clarity</li>
<li>Provides superior stain resistance especially when combined with SR2 Sealer</li>
<li>Coverage rate is approximately 600 - 800 sq ft per gallon</li>
</ul>
Select options