Related products

• 

  Ameripolish 3D SP

  <h5>Features</h5> <ul> <li>RTU - Ready to use</li> <li>UV stabilizers help protect against fading</li> <li>Creates water resistant barrier to prevent staining, etching, and protect color</li> <li>3D SP is a color enhancer for polish concrete floors with dye</li> <li>Low VOC</li> <li>Contains 3D densifier properties to aid in hardening and dust proofing</li> <li>Coverage rate is approximately 2,000 - 2,500 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish PCA Curing Agent

  <h4>Features</h4> <ul> <li>Improves cure by retaining slab moisture</li> <li>High penetrating, non film forming</li> <li>Forms hydrophobic barrier to increase stain repellancy</li> <li>Improves scratch and abrasion resistance</li> <li>Reduces efflorescence and minimizes dust for healthier indoor air quality</li> <li>Replaces traditional Cure & Seal products on new concrete</li> <li>Coverage rate is approximately 1,000 - 1,500 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish ColorSolve

  <h4>Features</h4> <ul> <li>Updated formula</li> <li>Leaves no or very little residual dye on surface saving time on cleaning and dye expense</li> <li>Doubles the coverage rate of concrete dyes</li> <li>Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking</li> <li>Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing</li> </ul>

  Select options
• 

  Ameripolish – Color Juice 3D Colorant Concentrate (Part B)

  <h3>Features</h3> <ul> <li>Excellent UV resistance</li> <li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li> <li>Reducing freeze/thaw damage and salt damage</li> <li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li> <li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li> <li>Easily applied with pump sprayer.</li> <li>Horizontal or vertical application.</li> </ul>

  Select options
• 

  Ameripolish – Edge Tint Part B

  <h4>Features</h4> <ul> <li>Available in 22 AmeriPolish coordinating colors</li> <li>Creates uniform edges and borders to eliminate edge work</li> <li>Resists most oil, grease and food stains</li> <li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li> </ul>

  Select options
• 

  Ameripolish PSE Paver Sealer Enhancer

  <h4>Features</h4> <ul> <li>Breathable barrier prevents staining and seals out moisture</li> <li>Protects color from UV degradation</li> <li>Non-yellowing finish will not peel, crack, blister, or blush</li> <li>Environmentally safe, low VOCs</li> <li>Coverage rate is approximately 300-600 sq ft per gallon</li> </ul>

  Select options
• 

  Wagman Eco Coat

  <h4>Highlights</h4> <ul> <li>Penetrates, doesn't leave oily film</li> <li>V.O.C. compliant / low odor</li> <li>Environmentally safe and water soluble</li> <li>Non-staining and non-dusting</li> <li>Meets Army Corp. of Engineers specs</li> <li>Can be used as a rust inhibitor</li> <li>Safe for use on most surfaces</li> <li>Will not rinse off in rain</li> <li>Economical concentrate</li> <li>Concentrate reduces shipping cost</li> <li>Easy to mix and apply, suggested mix ratios vary with applications</li> <li>Virtually non-stick</li> </ul>

  Select options
• 

  Ameripolish – Strip & Clean 1 Gallon RTU Ships Hazmat-Fedex Ground or LTL

  <h4>Features</h4> <ul> <li>Grind-free sealer removal</li> <li>Formulated specifically to remove WB Surface Sealer, SureLock Stain Shield, and 3D SP</li> <li>Safely remove an improperly installed 'guard' type product to reinstall correctly</li> <li>Ideal for preparation prior to dye reapplication</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>

  Add to quote