8502 CrownFlex is a two-component, low viscosity, 100% solids, semi-rigid epoxy membrane, and joint sealant and cracks filler. It features a combination of excellent adhesion and elongation not available in general-purpose epoxy. It is formulated to provide the armoring of concrete joint edges and minimizing the deterioration of concrete joint/crack edge to impact. It is available in standard cure and fast cure. It is used for embedding detector wire loops for a traffic signal, electric gates, and robotics. 8502 CrownFlex should be used instead of elastomeric sealants that meet ASTM C920 Standard Specification for Elastomeric Joint Sealants which do not armor the concrete joint edges. It is used on floors, joints, and cracks subjected to heavy foot traffic, forklift traffic, and chemical attack, specifically food acids. Also, it is used as an epoxy membrane for waterproofing and crack dampening under epoxy coating and flooring systems. As a membrane under thin-set epoxy terrazzo, it meets NTMA and TTMAC requirements. It is VOC Compliant in all states and provinces in North America.
Crown Polymers 8502 CrownFlex™ Semi-Rigid Epoxy LV
Available in:
- CrownFlex 8502 Clear – 1.5 gal Kit
- CrownFlex 8502 Light Grey – 1.5 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money.
Technical Data Sheet
Loading...
FB Product Number
JTRP20000 | CrownFlex 8502 Clear – 1.5 gal Kit |
JTRP20002 | CrownFlex 8502 Light Grey – 1.5 gal Kit |
Related products
-
Ameripolish PCA Curing Agent
Hire
-
Day Rate
$228.00 – $10,788.00 / Day
<h4>Features</h4> <ul> <li>Improves cure by retaining slab moisture</li> <li>High penetrating, non film forming</li> <li>Forms hydrophobic barrier to increase stain repellancy</li> <li>Improves scratch and abrasion resistance</li> <li>Reduces efflorescence and minimizes dust for healthier indoor air quality</li> <li>Replaces traditional Cure & Seal products on new concrete</li> <li>Coverage rate is approximately 1,000 - 1,500 sq ft per gallon</li> </ul>Select options -
-
Ameripolish 3D SP
Hire
-
Day Rate
$60.00 – $14,250.00 / Day
<h5>Features</h5> <ul> <li>RTU - Ready to use</li> <li>UV stabilizers help protect against fading</li> <li>Creates water resistant barrier to prevent staining, etching, and protect color</li> <li>3D SP is a color enhancer for polish concrete floors with dye</li> <li>Low VOC</li> <li>Contains 3D densifier properties to aid in hardening and dust proofing</li> <li>Coverage rate is approximately 2,000 - 2,500 sq ft per gallon</li> </ul>Select options -
-
Ameripolish – Strip & Clean 1 Gallon RTU Ships Hazmat-Fedex Ground or LTL
Hire
-
Day Rate
$45.00 / Day
<h4>Features</h4> <ul> <li>Grind-free sealer removal</li> <li>Formulated specifically to remove WB Surface Sealer, SureLock Stain Shield, and 3D SP</li> <li>Safely remove an improperly installed 'guard' type product to reinstall correctly</li> <li>Ideal for preparation prior to dye reapplication</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>Add to cart -
-
Ameripolish SR2 Concrete Sealer SB
Hire
-
Day Rate
$178.00 – $8,977.50 / Day
<h4>Features</h4> <ul> <li>Non-topical penetrating sealer</li> <li>Treated surfaces 'breathe' and do not trap moisture</li> <li>Excellent stain repellency for residential, commercial, and even industrial applications</li> <li>Extreme hydrophobic and oil phobic characteristics for maximum stain resistance</li> <li>Coverage rate is approximately 3,000 - 5,000 sq ft per gallon</li> </ul>Select options -
-
Ameripolish ColorSolve
Hire
-
Day Rate
$61.00 – $2,356.00 / Day
<h4>Features</h4> <ul> <li>Updated formula</li> <li>Leaves no or very little residual dye on surface saving time on cleaning and dye expense</li> <li>Doubles the coverage rate of concrete dyes</li> <li>Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking</li> <li>Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing</li> </ul>Select options -
-
Ameripolish EZ Etch
Hire
-
Day Rate
$45.00 – $2,475.00 / Day
<h4>Features</h4> <ul> <li>Opens the concrete to prepare it for penetrating agents</li> <li>Safe for interior and exterior environments</li> <li>Biodegradable, low odor, and non-flammable</li> <li>Can be used safety on new or restoration construction, industrial facilities, commercial spaces, food packaging facilities, and residential areas</li> <li>Coverage rate is approximately 200 - 400 sq ft per gallon</li> </ul>Select options -
-
Ameripolish Rejuvenating Cleaner Concentrate 32 oz
Hire
-
Day Rate
$35.00 / Day
<h4>Features</h4> <ul> <li>Concentrated cleaner that removes daily debris from hard surfaces</li> <li>Contains chemical analogues to SR2 that reinforce stain protection</li> <li>Contains no harsh chemicals</li> <li>Environmentally friendly, biodegradable</li> <li>Easy to use tilt measure bottle</li> <li>Low VOC, VOC compliant</li> <li>Ideal for daily cleaning of polished concrete, terrazzo, epoxy, urethane and other hard surface flooring</li> </ul>Add to cart -
-
Ameripolish Oil Ingester System
Hire
-
Day Rate
$82.50 – $412.50 / Day
<h4>Features</h4> <ul> <li>Safely remove or ligthens oil stains from most surfaces</li> <li>Stops oil from continually wicking to the surface</li> <li>Does not damage colorants, sealers, or stain protectors</li> <li>Will not etch polished concrete</li> <li>Biodegradable, environmentally safe, and VOC compliant</li> <li>Works best above 55ºF</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>Select options -