Related products

• 

  Ameripolish Oil Ingester System

  <h4>Features</h4> <ul> <li>Safely remove or ligthens oil stains from most surfaces</li> <li>Stops oil from continually wicking to the surface</li> <li>Does not damage colorants, sealers, or stain protectors</li> <li>Will not etch polished concrete</li> <li>Biodegradable, environmentally safe, and VOC compliant</li> <li>Works best above 55ºF</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish SureLock Dye

  <h4>Features</h4> <ul> <li>Updated formula</li> <li>Most vibrant concrete dye Ameripolish has ever produced</li> <li>Mixes with water or acetone and is VOC compliant</li> <li>Consistent, rich penetrating color with UV stabalizers prevent fading</li> <li>Surelock is to be applied just before densifying with 3D HS or HSL</li> <li>Liquid concentrate eliminates the three hour wait to dissolve dye required by other products</li> <li>For indoor use only</li> <li>Coverage rate is approximately 400-700 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish ColorSolve

  <h4>Features</h4> <ul> <li>Updated formula</li> <li>Leaves no or very little residual dye on surface saving time on cleaning and dye expense</li> <li>Doubles the coverage rate of concrete dyes</li> <li>Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking</li> <li>Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing</li> </ul>

  Select options
• 

  Ameripolish PCA Curing Agent

  <h4>Features</h4> <ul> <li>Improves cure by retaining slab moisture</li> <li>High penetrating, non film forming</li> <li>Forms hydrophobic barrier to increase stain repellancy</li> <li>Improves scratch and abrasion resistance</li> <li>Reduces efflorescence and minimizes dust for healthier indoor air quality</li> <li>Replaces traditional Cure & Seal products on new concrete</li> <li>Coverage rate is approximately 1,000 - 1,500 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish 3D SP

  <h5>Features</h5> <ul> <li>RTU - Ready to use</li> <li>UV stabilizers help protect against fading</li> <li>Creates water resistant barrier to prevent staining, etching, and protect color</li> <li>3D SP is a color enhancer for polish concrete floors with dye</li> <li>Low VOC</li> <li>Contains 3D densifier properties to aid in hardening and dust proofing</li> <li>Coverage rate is approximately 2,000 - 2,500 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish SR2 Concrete Sealer WB

  <h4>Features</h4> <ul> <li>Great alternative where solvent based products are not applicable</li> <li>Economical penetrating sealer alternative</li> <li>Non-topical penetrating sealer</li> <li>Treated surfaces 'breathe' and do not trap moisture</li> <li>Excellent stain repellency for residential, commercial, and even industrial applications</li> <li>Extreme hydrophobic and oil phobic characteristics for maximum stain resistance</li> <li>Coverage rate is approximately 2,000 - 3,000 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish – Edge Tint Part A

  <h4>Features</h4> <ul> <li>Available in 22 AmeriPolish coordinating colors</li> <li>Creates uniform edges and borders to eliminate edge work</li> <li>Resists most oil, grease and food stains</li> <li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li> </ul>

  Add to quote
• 

  Ameripolish Rejuvenating Cleaner Concentrate 32 oz

  <h4>Features</h4> <ul> <li>Concentrated cleaner that removes daily debris from hard surfaces</li> <li>Contains chemical analogues to SR2 that reinforce stain protection</li> <li>Contains no harsh chemicals</li> <li>Environmentally friendly, biodegradable</li> <li>Easy to use tilt measure bottle</li> <li>Low VOC, VOC compliant</li> <li>Ideal for daily cleaning of polished concrete, terrazzo, epoxy, urethane and other hard surface flooring</li> </ul>

  Add to quote