8303 CrownShield MVB can be used as a single primer coat negative side moisture vapor barrier suitable for various types of concrete. The low viscosity formula not only promotes deeper concrete penetration for superior substrate adhesion but also generates a higher propensity for sealing and blocking moisture drive than standard epoxy flooring products. It is intended for use when high moisture levels are present in the concrete which may cause loss of bond of moisture-sensitive flooring systems, including impervious and semi-pervious flooring, such as, epoxy, polyaspartic, polyurethane, carpets, vinyl tiles and covering, tile, wood floors, etc. It meets or exceeds ASTM F3010 Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings. It is VOC Compliant in all states and provinces in North America.
View cart “Ameripolish – Strip & Clean 1 Gallon RTU Ships Hazmat-Fedex Ground or LTL” has been added to your cart.
Crown Polymers CrownShield MVB-F 8303 Clear, Epoxy Fast Cure
Available in 3 Gallon Kit and 15 Gallon Kit.
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money.
Technical Data Sheet
Loading...
Related products
-
Ameripolish Oil Ingester System
Hire
-
Day Rate
$82.50 – $412.50 / Day
<h4>Features</h4> <ul> <li>Safely remove or ligthens oil stains from most surfaces</li> <li>Stops oil from continually wicking to the surface</li> <li>Does not damage colorants, sealers, or stain protectors</li> <li>Will not etch polished concrete</li> <li>Biodegradable, environmentally safe, and VOC compliant</li> <li>Works best above 55ºF</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>Select options -
-
Ameripolish SR2 Concrete Sealer SB
Hire
-
Day Rate
$178.00 – $8,977.50 / Day
<h4>Features</h4> <ul> <li>Non-topical penetrating sealer</li> <li>Treated surfaces 'breathe' and do not trap moisture</li> <li>Excellent stain repellency for residential, commercial, and even industrial applications</li> <li>Extreme hydrophobic and oil phobic characteristics for maximum stain resistance</li> <li>Coverage rate is approximately 3,000 - 5,000 sq ft per gallon</li> </ul>Select options -
-
Ameripolish AquaShield
Hire
-
Day Rate
$123.60 – $6,180.00 / Day
<h5>Features</h5> <ul> <li>Ideal for use on any concrete or masonry surface indoor or outdoor</li> <li>Extremely long-lasting</li> <li>Water based, fast drying</li> <li>Low VOC and non flammablet</li> <li>Coverage rate is approximately 400-2,000 sq ft per gallon</li> </ul>Select options -
-
Ameripolish Rejuvenating Cleaner Concentrate 32 oz
Hire
-
Day Rate
$35.00 / Day
<h4>Features</h4> <ul> <li>Concentrated cleaner that removes daily debris from hard surfaces</li> <li>Contains chemical analogues to SR2 that reinforce stain protection</li> <li>Contains no harsh chemicals</li> <li>Environmentally friendly, biodegradable</li> <li>Easy to use tilt measure bottle</li> <li>Low VOC, VOC compliant</li> <li>Ideal for daily cleaning of polished concrete, terrazzo, epoxy, urethane and other hard surface flooring</li> </ul>Add to cart -
-
Ameripolish X Link WB Surface Sealer
Hire
-
Day Rate
$31.00 – $7,550.00 / Day
<h4>Features</h4> <ul> <li>RTU - Ready to use</li> <li>Breathable and fast drying</li> <li>Oil and chemical resistant</li> <li>Non-yellowing stain finish</li> <li>Added mildew and UV protection</li> <li>Ideal for indoor and outdoor applications</li> <li>Available in 'Wet Look' or stain finishes</li> <li>Coverage rate is approximately 300-500 sq ft per gallon</li> </ul>Select options -
-
Ameripolish – Strip & Clean 1 Gallon RTU Ships Hazmat-Fedex Ground or LTL
Hire
-
Day Rate
$45.00 / Day
<h4>Features</h4> <ul> <li>Grind-free sealer removal</li> <li>Formulated specifically to remove WB Surface Sealer, SureLock Stain Shield, and 3D SP</li> <li>Safely remove an improperly installed 'guard' type product to reinstall correctly</li> <li>Ideal for preparation prior to dye reapplication</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>Add to cart -
-
Ameripolish – Color Juice 3D Sample Size
Hire
-
Day Rate
$8.50 / Day
<h3>FEATURES</h3> <ul> <li>Created for outdoor use but can be used indoors</li> <li>Fast, easy application</li> <li>Available in 14 colors</li> <li>Water based and UV stable</li> <li>Low VOC</li> <li>Must be used with EZ Etch Concrete Surface Etching Agent and X-Link WB Surface Sealer</li> <li>Coverage rate is approximately 400-800 sq ft per gallon</li> </ul>Select options -
-
Ameripolish PCA Curing Agent
Hire
-
Day Rate
$228.00 – $10,788.00 / Day
<h4>Features</h4> <ul> <li>Improves cure by retaining slab moisture</li> <li>High penetrating, non film forming</li> <li>Forms hydrophobic barrier to increase stain repellancy</li> <li>Improves scratch and abrasion resistance</li> <li>Reduces efflorescence and minimizes dust for healthier indoor air quality</li> <li>Replaces traditional Cure & Seal products on new concrete</li> <li>Coverage rate is approximately 1,000 - 1,500 sq ft per gallon</li> </ul>Select options -