8303 CrownShield MVB can be used as a single primer coat negative side moisture vapor barrier suitable for various types of concrete. The low viscosity formula not only promotes deeper concrete penetration for superior substrate adhesion but also generates a higher propensity for sealing and blocking moisture drive than standard epoxy flooring products. It is intended for use when high moisture levels are present in the concrete which may cause loss of bond of moisture-sensitive flooring systems, including impervious and semi-pervious flooring, such as, epoxy, polyaspartic, polyurethane, carpets, vinyl tiles and covering, tile, wood floors, etc. It meets or exceeds ASTM F3010 Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings. It is VOC Compliant in all states and provinces in North America.
Crown Polymers CrownShield MVB-F 8303 Clear, Epoxy Fast Cure
Available in 3 Gallon Kit and 15 Gallon Kit.
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money.
Technical Data Sheet
Loading...
Related products
-
Ameripolish X-Link E WL Surface Sealer
Hire
-
Day Rate
$43.00 – $10,705.00 / Day
<h4>Features</h4> <ul> <li>RTU - Ready to use</li> <li>“Wet-Look” finish</li> <li>breathable and fast drying</li> <li>Oil and chemical resistant</li> <li>Non-yellowing stain finish</li> <li>Added mildew and UV protection</li> <li>Ideal for outdoor applications</li> <li>Coverage rate is approximately 500-1000 sq ft per gallon</li> <li>Can be applied to most cementitious surfaces, other unglazed stone, and masonry surfaces</li> </ul>Select options -
-
Ameripolish – Strip & Clean 1 Gallon RTU Ships Hazmat-Fedex Ground or LTL
Hire
-
Day Rate
$45.00 / Day
<h4>Features</h4> <ul> <li>Grind-free sealer removal</li> <li>Formulated specifically to remove WB Surface Sealer, SureLock Stain Shield, and 3D SP</li> <li>Safely remove an improperly installed 'guard' type product to reinstall correctly</li> <li>Ideal for preparation prior to dye reapplication</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>Add to cart -
-
Ameripolish EZ Etch
Hire
-
Day Rate
$45.00 – $2,475.00 / Day
<h4>Features</h4> <ul> <li>Opens the concrete to prepare it for penetrating agents</li> <li>Safe for interior and exterior environments</li> <li>Biodegradable, low odor, and non-flammable</li> <li>Can be used safety on new or restoration construction, industrial facilities, commercial spaces, food packaging facilities, and residential areas</li> <li>Coverage rate is approximately 200 - 400 sq ft per gallon</li> </ul>Select options -
-
Color Juice 3D Hardener (Part A)
Hire
-
Day Rate
$27.50 – $137.50 / Day
<h4>Features</h4> <ul> <li>Excellent UV resistance</li> <li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li> <li>Reducing freeze/thaw damage and salt damage</li> <li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li> <li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li> <li>Easily applied with pump sprayer.</li> <li>Horizontal or vertical application.</li> </ul>Select options -
-
Wagman Eco Coat
Hire
-
Day Rate
$86.00 – $383.00 / Day
<h4>Highlights</h4> <ul> <li>Penetrates, doesn't leave oily film</li> <li>V.O.C. compliant / low odor</li> <li>Environmentally safe and water soluble</li> <li>Non-staining and non-dusting</li> <li>Meets Army Corp. of Engineers specs</li> <li>Can be used as a rust inhibitor</li> <li>Safe for use on most surfaces</li> <li>Will not rinse off in rain</li> <li>Economical concentrate</li> <li>Concentrate reduces shipping cost</li> <li>Easy to mix and apply, suggested mix ratios vary with applications</li> <li>Virtually non-stick</li> </ul>Select options -
-
Ameripolish X Link WB Surface Sealer
Hire
-
Day Rate
$31.00 – $7,550.00 / Day
<h4>Features</h4> <ul> <li>RTU - Ready to use</li> <li>Breathable and fast drying</li> <li>Oil and chemical resistant</li> <li>Non-yellowing stain finish</li> <li>Added mildew and UV protection</li> <li>Ideal for indoor and outdoor applications</li> <li>Available in 'Wet Look' or stain finishes</li> <li>Coverage rate is approximately 300-500 sq ft per gallon</li> </ul>Select options -
-
Ameripolish 3D SP
Hire
-
Day Rate
$60.00 – $14,250.00 / Day
<h5>Features</h5> <ul> <li>RTU - Ready to use</li> <li>UV stabilizers help protect against fading</li> <li>Creates water resistant barrier to prevent staining, etching, and protect color</li> <li>3D SP is a color enhancer for polish concrete floors with dye</li> <li>Low VOC</li> <li>Contains 3D densifier properties to aid in hardening and dust proofing</li> <li>Coverage rate is approximately 2,000 - 2,500 sq ft per gallon</li> </ul>Select options -