8502 CrownFlex is a two-component, low viscosity, 100% solids, semi-rigid epoxy membrane, and joint sealant and cracks filler. It features a combination of excellent adhesion and elongation not available in general-purpose epoxy. It is formulated to provide the armoring of concrete joint edges and minimizing the deterioration of concrete joint/crack edge to impact. It is available in standard cure and fast cure. It is used for embedding detector wire loops for a traffic signal, electric gates, and robotics. 8502 CrownFlex should be used instead of elastomeric sealants that meet ASTM C920 Standard Specification for Elastomeric Joint Sealants which do not armor the concrete joint edges. It is used on floors, joints, and cracks subjected to heavy foot traffic, forklift traffic, and chemical attack, specifically food acids. Also, it is used as an epoxy membrane for waterproofing and crack dampening under epoxy coating and flooring systems. As a membrane under thin-set epoxy terrazzo, it meets NTMA and TTMAC requirements. It is VOC Compliant in all states and provinces in North America.
Crown Polymers 8502 CrownFlex™ Semi-Rigid Epoxy LV
Available in:
- CrownFlex 8502 Clear – 1.5 gal Kit
- CrownFlex 8502 Light Grey – 1.5 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money.
Technical Data Sheet
Loading...
FB Product Number
JTRP20000 | CrownFlex 8502 Clear – 1.5 gal Kit |
JTRP20002 | CrownFlex 8502 Light Grey – 1.5 gal Kit |
Related products
-
Ameripolish – Color Juice 3D Sample Size
Hire
-
Day Rate
$8.50 / Day
<h3>FEATURES</h3> <ul> <li>Created for outdoor use but can be used indoors</li> <li>Fast, easy application</li> <li>Available in 14 colors</li> <li>Water based and UV stable</li> <li>Low VOC</li> <li>Must be used with EZ Etch Concrete Surface Etching Agent and X-Link WB Surface Sealer</li> <li>Coverage rate is approximately 400-800 sq ft per gallon</li> </ul>Select options -
-
Wagman Eco Crete
Hire
-
Day Rate
$61.00 – $234.00 / Day
<h4>Highlights</h4> <ul> <li>Ready to use and comes with hand sprayer</li> <li>Biodegradable</li> <li>Nonhazardous</li> <li>Will not harm chrome, rubber and most other surfaces when used according to directions</li> <li>Many uses - concrete forms, concrete and mortar mixers, hand tools, precast equipment, ready-mix trucks, saw-cutting equipment, screeds, power trowels</li> </ul>Select options -
-
Ameripolish 3D HSL Concrete Densifier
Hire
-
Day Rate
$114.00 – $5,678.00 / Day
<h5>Features</h5> <ul> <li>Hardens deep within the slab to improve durability even after grinding</li> <li>Contains UV stabalizers to help protect color from fading</li> <li>Ideal for new construction, existing concrete, and diamond pad burnishing</li> <li>Enhances polished color, gloss and clarity</li> <li>Provides superior stain resistance especially when combined with SR2 Sealer</li> <li>Coverage rate is approximately 600 - 800 sq ft per gallon</li> </ul>Select options -
-
Ameripolish Paver Sealer
Hire
-
Day Rate
$42.51 – $10,292.00 / Day
<h4>Features</h4> <ul> <li>Breathable barrier prevents staining and seals out moisture</li> <li>Protects color from UV degradation</li> <li>Non-yellowing finish will not peel, crack, blister, or blush</li> <li>Environmentally safe, low VOCs</li> <li>Coverage rate is approximately 300-600 sq ft per gallon</li> </ul>Select options -
-
Ameripolish – Edge Tint Part A
Hire
-
Day Rate
$55.00 / Day
<h4>Features</h4> <ul> <li>Available in 22 AmeriPolish coordinating colors</li> <li>Creates uniform edges and borders to eliminate edge work</li> <li>Resists most oil, grease and food stains</li> <li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li> </ul>Add to cart -
-
Ameripolish EZ-Kut Grinding Agent
Hire
-
Day Rate
$45.00 – $10,873.00 / Day
<h4>Features</h4> <ul> <li>Speeds up the time spent on initial cut on hard, dense concrete</li> <li>Helps with exposing large aggregate faster than dry only or standard wet methods</li> <li>Maximizes efficiency, increases productivity and extends the life of diamond tooling</li> <li>Reduces labor costs</li> <li>Water-based and VOC compliant</li> <li>Shortens the project time-line</li> <li>Unique DRY method avoiding the hassle of dealing with slurry</li> </ul>Select options -
-
Color Juice 3D Hardener (Part A)
Hire
-
Day Rate
$27.50 – $137.50 / Day
<h4>Features</h4> <ul> <li>Excellent UV resistance</li> <li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li> <li>Reducing freeze/thaw damage and salt damage</li> <li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li> <li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li> <li>Easily applied with pump sprayer.</li> <li>Horizontal or vertical application.</li> </ul>Select options -
-
Ameripolish Classic Dye
Hire
-
Day Rate
$8.50 – $250.00 / Day
<h5>Features</h5> <ul> <li>Solvent-based, mixes with acetone, available in 22 colors</li> <li>Colors penetrate the surface and never wear off</li> <li>Will not grind off during resin-grinding stages of polished concrete</li> <li>Coordinate with AmeriPolish Edge Tints for a seamless wall-to-wall floor solution</li> <li>For indoor use only</li> <li>Coverage rate is approximately 400-700 sq ft per gallon</li> </ul> Originally designed specifically for polished and exposed concrete, the AmeriPolish Classic dyes penetrate into the surface of the concrete slab for extremely long lasting color that will not wear from daily usage. Classic dyes can be used as a base color or touch up for concrete that has received integral color, dry shake hardenrs, acid stains, or even layered to create a truly unique, mottled effect.Select options -