<h4>Features</h4>
<ul>
<li>Breathable barrier prevents staining and seals out moisture</li>
<li>Protects color from UV degradation</li>
<li>Non-yellowing finish will not peel, crack, blister, or blush</li>
<li>Environmentally safe, low VOCs</li>
<li>Coverage rate is approximately 300-600 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Improves cure by retaining slab moisture</li>
<li>High penetrating, non film forming</li>
<li>Forms hydrophobic barrier to increase stain repellancy</li>
<li>Improves scratch and abrasion resistance</li>
<li>Reduces efflorescence and minimizes dust for healthier indoor air quality</li>
<li>Replaces traditional Cure & Seal products on new concrete</li>
<li>Coverage rate is approximately 1,000 - 1,500 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Concentrated cleaner that removes daily debris from hard surfaces</li>
<li>Contains chemical analogues to SR2 that reinforce stain protection</li>
<li>Contains no harsh chemicals</li>
<li>Environmentally friendly, biodegradable</li>
<li>Easy to use tilt measure bottle</li>
<li>Low VOC, VOC compliant</li>
<li>Ideal for daily cleaning of polished concrete, terrazzo, epoxy, urethane and other hard surface flooring</li>
</ul>
Select options
<h4>Highlights</h4>
<ul>
<li>Penetrates, doesn't leave oily film</li>
<li>V.O.C. compliant / low odor</li>
<li>Environmentally safe and water soluble</li>
<li>Non-staining and non-dusting</li>
<li>Meets Army Corp. of Engineers specs</li>
<li>Can be used as a rust inhibitor</li>
<li>Safe for use on most surfaces</li>
<li>Will not rinse off in rain</li>
<li>Economical concentrate</li>
<li>Concentrate reduces shipping cost</li>
<li>Easy to mix and apply, suggested mix ratios vary with applications</li>
<li>Virtually non-stick</li>
</ul>
Select options
<h5>Features</h5>
<ul>
<li>RTU - Ready to use</li>
<li>UV stabilizers help protect against fading</li>
<li>Creates water resistant barrier to prevent staining, etching, and protect color</li>
<li>3D SP is a color enhancer for polish concrete floors with dye</li>
<li>Low VOC</li>
<li>Contains 3D densifier properties to aid in hardening and dust proofing</li>
<li>Coverage rate is approximately 2,000 - 2,500 sq ft per gallon</li>
</ul>
Select options
<h3>FEATURES</h3>
<ul>
<li>Created for outdoor use but can be used indoors</li>
<li>Fast, easy application</li>
<li>Available in 14 colors</li>
<li>Water based and UV stable</li>
<li>Low VOC</li>
<li>Must be used with EZ Etch Concrete Surface Etching Agent and X-Link WB Surface Sealer</li>
<li>Coverage rate is approximately 400-800 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Available in 22 AmeriPolish coordinating colors</li>
<li>Creates uniform edges and borders to eliminate edge work</li>
<li>Resists most oil, grease and food stains</li>
<li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li>
</ul>
Add to quote