8303 CrownShield MVB can be used as a single primer coat negative side moisture vapor barrier suitable for various types of concrete. The low viscosity formula not only promotes deeper concrete penetration for superior substrate adhesion but also generates a higher propensity for sealing and blocking moisture drive than standard epoxy flooring products. It is intended for use when high moisture levels are present in the concrete which may cause loss of bond of moisture-sensitive flooring systems, including impervious and semi-pervious flooring, such as, epoxy, polyaspartic, polyurethane, carpets, vinyl tiles and covering, tile, wood floors, etc. It meets or exceeds ASTM F3010 Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings. It is VOC Compliant in all states and provinces in North America.
Crown Polymers CrownShield MVB-F 8303 Clear, Epoxy Fast Cure
Available in 3 Gallon Kit and 15 Gallon Kit.
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money.
Technical Data Sheet
Loading...
Related products
-
Wagman Eco Crete
Hire
-
Day Rate
$61.00 – $234.00 / Day
<h4>Highlights</h4> <ul> <li>Ready to use and comes with hand sprayer</li> <li>Biodegradable</li> <li>Nonhazardous</li> <li>Will not harm chrome, rubber and most other surfaces when used according to directions</li> <li>Many uses - concrete forms, concrete and mortar mixers, hand tools, precast equipment, ready-mix trucks, saw-cutting equipment, screeds, power trowels</li> </ul>Select options -
-
Ameripolish – Strip & Clean 1 Gallon RTU Ships Hazmat-Fedex Ground or LTL
Hire
-
Day Rate
$45.00 / Day
<h4>Features</h4> <ul> <li>Grind-free sealer removal</li> <li>Formulated specifically to remove WB Surface Sealer, SureLock Stain Shield, and 3D SP</li> <li>Safely remove an improperly installed 'guard' type product to reinstall correctly</li> <li>Ideal for preparation prior to dye reapplication</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>Add to cart -
-
Ameripolish Oil Ingester System
Hire
-
Day Rate
$82.50 – $412.50 / Day
<h4>Features</h4> <ul> <li>Safely remove or ligthens oil stains from most surfaces</li> <li>Stops oil from continually wicking to the surface</li> <li>Does not damage colorants, sealers, or stain protectors</li> <li>Will not etch polished concrete</li> <li>Biodegradable, environmentally safe, and VOC compliant</li> <li>Works best above 55ºF</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>Select options -
-
Ameripolish – Color Juice 3D Colorant Concentrate (Part B)
Hire
-
Day Rate
$45.00 – $225.00 / Day
<h3>Features</h3> <ul> <li>Excellent UV resistance</li> <li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li> <li>Reducing freeze/thaw damage and salt damage</li> <li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li> <li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li> <li>Easily applied with pump sprayer.</li> <li>Horizontal or vertical application.</li> </ul>Select options -
-
Ameripolish – Edge Tint Part B
Hire
-
Day Rate
$69.00 / Day
<h4>Features</h4> <ul> <li>Available in 22 AmeriPolish coordinating colors</li> <li>Creates uniform edges and borders to eliminate edge work</li> <li>Resists most oil, grease and food stains</li> <li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li> </ul>Select options -
-
Ameripolish ColorSolve
Hire
-
Day Rate
$61.00 – $2,356.00 / Day
<h4>Features</h4> <ul> <li>Updated formula</li> <li>Leaves no or very little residual dye on surface saving time on cleaning and dye expense</li> <li>Doubles the coverage rate of concrete dyes</li> <li>Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking</li> <li>Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing</li> </ul>Select options -
-
Ameripolish Classic Dye
Hire
-
Day Rate
$8.50 – $250.00 / Day
<h5>Features</h5> <ul> <li>Solvent-based, mixes with acetone, available in 22 colors</li> <li>Colors penetrate the surface and never wear off</li> <li>Will not grind off during resin-grinding stages of polished concrete</li> <li>Coordinate with AmeriPolish Edge Tints for a seamless wall-to-wall floor solution</li> <li>For indoor use only</li> <li>Coverage rate is approximately 400-700 sq ft per gallon</li> </ul> Originally designed specifically for polished and exposed concrete, the AmeriPolish Classic dyes penetrate into the surface of the concrete slab for extremely long lasting color that will not wear from daily usage. Classic dyes can be used as a base color or touch up for concrete that has received integral color, dry shake hardenrs, acid stains, or even layered to create a truly unique, mottled effect.Select options -
-
Ameripolish – Color Juice 3D Sample Size
Hire
-
Day Rate
$8.50 / Day
<h3>FEATURES</h3> <ul> <li>Created for outdoor use but can be used indoors</li> <li>Fast, easy application</li> <li>Available in 14 colors</li> <li>Water based and UV stable</li> <li>Low VOC</li> <li>Must be used with EZ Etch Concrete Surface Etching Agent and X-Link WB Surface Sealer</li> <li>Coverage rate is approximately 400-800 sq ft per gallon</li> </ul>Select options -