KEY #515 is a general purpose epoxy suitable for use as a body coat/binder or top coat. Designed for a wide variety of applications, KEY #515 provides an ideal, economical resin for various Key Resin Systems. KEY #515 provides increased barrier thickness and gives added protection to concrete against chemical and abrasive attack. Consult with Key Resin Technical Service for recommended use.
Key Resin – #515 Epoxy Bodycoat Part A Pale Buff 4 Gallon
-
$286.00
KEY ADVANTAGES
- Economical
- Denser and harder than concrete
- Meets USGBC LEED criteria for low VOC
- Low odor for use in occupied areas
- Low viscosity – good wetting properties
- Meets USDA requirements for incidental food contact
Additional information
Weight | 42 lbs |
---|---|
Dimensions | 16 × 11.5 × 12 in |
FB Product Number
COAT30003 | Key Resin Epoxy Bodycoat Part A Pale Buff 4 Gallon #515 |
Only logged in customers who have purchased this product may leave a review.
Related products
-
Ameripolish Paver Sealer
Hire
-
Day Rate
$35.45 – $7,747.50 / Day
<h4>Features</h4> <ul> <li>Breathable barrier prevents staining and seals out moisture</li> <li>Protects color from UV degradation</li> <li>Non-yellowing finish will not peel, crack, blister, or blush</li> <li>Environmentally safe, low VOCs</li> <li>Coverage rate is approximately 300-600 sq ft per gallon</li> </ul>Select options -
-
Ameripolish SureLock Dye
Hire
-
Day Rate
$8.50 – $225.00 / Day
<h4>Features</h4> <ul> <li>Updated formula</li> <li>Most vibrant concrete dye Ameripolish has ever produced</li> <li>Mixes with water or acetone and is VOC compliant</li> <li>Consistent, rich penetrating color with UV stabalizers prevent fading</li> <li>Surelock is to be applied just before densifying with 3D HS or HSL</li> <li>Liquid concentrate eliminates the three hour wait to dissolve dye required by other products</li> <li>For indoor use only</li> <li>Coverage rate is approximately 400-700 sq ft per gallon</li> </ul>Select options -
-
Wagman Eco Crete
Hire
-
Day Rate
$61.00 – $234.00 / Day
<h4>Highlights</h4> <ul> <li>Ready to use and comes with hand sprayer</li> <li>Biodegradable</li> <li>Nonhazardous</li> <li>Will not harm chrome, rubber and most other surfaces when used according to directions</li> <li>Many uses - concrete forms, concrete and mortar mixers, hand tools, precast equipment, ready-mix trucks, saw-cutting equipment, screeds, power trowels</li> </ul>Select options -
-
Ameripolish ColorSolve
Hire
-
Day Rate
$55.00 – $2,141.00 / Day
<h4>Features</h4> <ul> <li>Updated formula</li> <li>Leaves no or very little residual dye on surface saving time on cleaning and dye expense</li> <li>Doubles the coverage rate of concrete dyes</li> <li>Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking</li> <li>Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing</li> </ul>Select options -
-
Ameripolish EZ Etch
Hire
-
Day Rate
$45.00 – $2,475.00 / Day
<h4>Features</h4> <ul> <li>Opens the concrete to prepare it for penetrating agents</li> <li>Safe for interior and exterior environments</li> <li>Biodegradable, low odor, and non-flammable</li> <li>Can be used safety on new or restoration construction, industrial facilities, commercial spaces, food packaging facilities, and residential areas</li> <li>Coverage rate is approximately 200 - 400 sq ft per gallon</li> </ul>Select options -
-
Ameripolish Rejuvenating Cleaner
Hire
-
Day Rate
$550.00 / Day
<h4>Features</h4> <ul> <li>Concentrated cleaner that removes daily debris from hard surfaces</li> <li>Contains chemical analogues to SR2 that reinforce stain protection</li> <li>Contains no harsh chemicals</li> <li>Environmentally friendly, biodegradable</li> <li>Easy to use tilt measure bottle</li> <li>Low VOC, VOC compliant</li> <li>Ideal for daily cleaning of polished concrete, terrazzo, epoxy, urethane and other hard surface flooring</li> </ul>Select options -
-
Ameripolish Penetrating Agent Plus 30oz
Hire
-
Day Rate
$42.00 / Day
<h4>Features</h4> <ul> <li>Improves dye penetration</li> <li>Minimizes surface residue and reduces materials waste</li> <li>Very easy to use, just add 4oz to a premixed gallon of dye</li> <li>Extends the drying time of Ameripolish solvent-based dyes</li> <li>Can be used on most cementious surfaces</li> <li>Ideal for very dense or hard concrete where normal dye will not penetrate</li> <li>Comes in a convenient and easy container that helps you mix the right ratio every time</li> </ul>Add to cart -
Reviews
There are no reviews yet.