KEY #515 is a general purpose epoxy suitable for use as a body coat/binder or top coat. Designed for a wide variety of applications, KEY #515 provides an ideal, economical resin for various Key Resin Systems. KEY #515 provides increased barrier thickness and gives added protection to concrete against chemical and abrasive attack. Consult with Key Resin Technical Service for recommended use.
Key Resin – #515 Epoxy Bodycoat Part A Pale Buff 4 Gallon
-
$279.00
KEY ADVANTAGES
- Economical
- Denser and harder than concrete
- Meets USGBC LEED criteria for low VOC
- Low odor for use in occupied areas
- Low viscosity – good wetting properties
- Meets USDA requirements for incidental food contact
Additional information
Weight | 42 lbs |
---|---|
Dimensions | 16 × 11.5 × 12 in |
FB Product Number
COAT30003 | Key Resin Epoxy Bodycoat Part A Pale Buff 4 Gallon #515 |
Only logged in customers who have purchased this product may leave a review.
Related products
-
Ameripolish EZ Etch
Hire
-
Day Rate
$45.00 – $2,475.00 / Day
<h4>Features</h4> <ul> <li>Opens the concrete to prepare it for penetrating agents</li> <li>Safe for interior and exterior environments</li> <li>Biodegradable, low odor, and non-flammable</li> <li>Can be used safety on new or restoration construction, industrial facilities, commercial spaces, food packaging facilities, and residential areas</li> <li>Coverage rate is approximately 200 - 400 sq ft per gallon</li> </ul>Select options -
-
Ameripolish – Color Juice 3D Sample Size
Hire
-
Day Rate
$8.50 / Day
<h3>FEATURES</h3> <ul> <li>Created for outdoor use but can be used indoors</li> <li>Fast, easy application</li> <li>Available in 14 colors</li> <li>Water based and UV stable</li> <li>Low VOC</li> <li>Must be used with EZ Etch Concrete Surface Etching Agent and X-Link WB Surface Sealer</li> <li>Coverage rate is approximately 400-800 sq ft per gallon</li> </ul>Select options -
-
Ameripolish Penetrating Agent Plus 30oz
Hire
-
Day Rate
$42.00 / Day
<h4>Features</h4> <ul> <li>Improves dye penetration</li> <li>Minimizes surface residue and reduces materials waste</li> <li>Very easy to use, just add 4oz to a premixed gallon of dye</li> <li>Extends the drying time of Ameripolish solvent-based dyes</li> <li>Can be used on most cementious surfaces</li> <li>Ideal for very dense or hard concrete where normal dye will not penetrate</li> <li>Comes in a convenient and easy container that helps you mix the right ratio every time</li> </ul>Add to cart -
-
Ameripolish – Edge Tint Part A
Hire
-
Day Rate
$55.00 / Day
<h4>Features</h4> <ul> <li>Available in 22 AmeriPolish coordinating colors</li> <li>Creates uniform edges and borders to eliminate edge work</li> <li>Resists most oil, grease and food stains</li> <li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li> </ul>Add to cart -
-
Color Juice 3D Hardener (Part A)
Hire
-
Day Rate
$27.50 – $137.50 / Day
<h4>Features</h4> <ul> <li>Excellent UV resistance</li> <li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li> <li>Reducing freeze/thaw damage and salt damage</li> <li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li> <li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li> <li>Easily applied with pump sprayer.</li> <li>Horizontal or vertical application.</li> </ul>Select options -
-
Ameripolish – Strip & Clean 1 Gallon RTU Ships Hazmat-Fedex Ground or LTL
Hire
-
Day Rate
$45.00 / Day
<h4>Features</h4> <ul> <li>Grind-free sealer removal</li> <li>Formulated specifically to remove WB Surface Sealer, SureLock Stain Shield, and 3D SP</li> <li>Safely remove an improperly installed 'guard' type product to reinstall correctly</li> <li>Ideal for preparation prior to dye reapplication</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>Add to cart -
-
Wagman Eco Coat
Hire
-
Day Rate
$86.00 – $383.00 / Day
<h4>Highlights</h4> <ul> <li>Penetrates, doesn't leave oily film</li> <li>V.O.C. compliant / low odor</li> <li>Environmentally safe and water soluble</li> <li>Non-staining and non-dusting</li> <li>Meets Army Corp. of Engineers specs</li> <li>Can be used as a rust inhibitor</li> <li>Safe for use on most surfaces</li> <li>Will not rinse off in rain</li> <li>Economical concentrate</li> <li>Concentrate reduces shipping cost</li> <li>Easy to mix and apply, suggested mix ratios vary with applications</li> <li>Virtually non-stick</li> </ul>Select options -
-
Ameripolish PG-7K Polishable Grout Coating System Part A & B Kit
Hire
-
Day Rate
$111.00 / Day
-
Reviews
There are no reviews yet.