Related products

• 

  Ameripolish EZ-Kut Grinding Agent

  <h4>Features</h4> <ul> <li>Speeds up the time spent on initial cut on hard, dense concrete</li> <li>Helps with exposing large aggregate faster than dry only or standard wet methods</li> <li>Maximizes efficiency, increases productivity and extends the life of diamond tooling</li> <li>Reduces labor costs</li> <li>Water-based and VOC compliant</li> <li>Shortens the project time-line</li> <li>Unique DRY method avoiding the hassle of dealing with slurry</li> </ul>

  Select options
• 

  Ameripolish X-Link E WL Surface Sealer

  <h4>Features</h4> <ul> <li>RTU - Ready to use</li> <li>“Wet-Look” finish</li> <li>breathable and fast drying</li> <li>Oil and chemical resistant</li> <li>Non-yellowing stain finish</li> <li>Added mildew and UV protection</li> <li>Ideal for outdoor applications</li> <li>Coverage rate is approximately 500-1000 sq ft per gallon</li> <li>Can be applied to most cementitious surfaces, other unglazed stone, and masonry surfaces</li> </ul>

  Select options
• 

  Ameripolish – Strip & Clean 1 Gallon RTU Ships Hazmat-Fedex Ground or LTL

  <h4>Features</h4> <ul> <li>Grind-free sealer removal</li> <li>Formulated specifically to remove WB Surface Sealer, SureLock Stain Shield, and 3D SP</li> <li>Safely remove an improperly installed 'guard' type product to reinstall correctly</li> <li>Ideal for preparation prior to dye reapplication</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>

  Add to quote
• 

  Ameripolish SureLock Dye

  <h4>Features</h4> <ul> <li>Updated formula</li> <li>Most vibrant concrete dye Ameripolish has ever produced</li> <li>Mixes with water or acetone and is VOC compliant</li> <li>Consistent, rich penetrating color with UV stabalizers prevent fading</li> <li>Surelock is to be applied just before densifying with 3D HS or HSL</li> <li>Liquid concentrate eliminates the three hour wait to dissolve dye required by other products</li> <li>For indoor use only</li> <li>Coverage rate is approximately 400-700 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish – Edge Tint Part B

  <h4>Features</h4> <ul> <li>Available in 22 AmeriPolish coordinating colors</li> <li>Creates uniform edges and borders to eliminate edge work</li> <li>Resists most oil, grease and food stains</li> <li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li> </ul>

  Select options
• 

  Ameripolish EZ Etch

  <h4>Features</h4> <ul> <li>Opens the concrete to prepare it for penetrating agents</li> <li>Safe for interior and exterior environments</li> <li>Biodegradable, low odor, and non-flammable</li> <li>Can be used safety on new or restoration construction, industrial facilities, commercial spaces, food packaging facilities, and residential areas</li> <li>Coverage rate is approximately 200 - 400 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish AquaShield

  <h5>Features</h5> <ul> <li>Ideal for use on any concrete or masonry surface indoor or outdoor</li> <li>Extremely long-lasting</li> <li>Water based, fast drying</li> <li>Low VOC and non flammablet</li> <li>Coverage rate is approximately 400-2,000 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish ColorSolve

  <h4>Features</h4> <ul> <li>Updated formula</li> <li>Leaves no or very little residual dye on surface saving time on cleaning and dye expense</li> <li>Doubles the coverage rate of concrete dyes</li> <li>Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking</li> <li>Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing</li> </ul>

  Select options