<h3>Features</h3>
<ul>
<li>Excellent UV resistance</li>
<li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li>
<li>Reducing freeze/thaw damage and salt damage</li>
<li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li>
<li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li>
<li>Easily applied with pump sprayer.</li>
<li>Horizontal or vertical application.</li>
</ul>
Select options
<h5>Features</h5>
<ul>
<li>RTU - Ready to use</li>
<li>UV stabilizers help protect against fading</li>
<li>Creates water resistant barrier to prevent staining, etching, and protect color</li>
<li>3D SP is a color enhancer for polish concrete floors with dye</li>
<li>Low VOC</li>
<li>Contains 3D densifier properties to aid in hardening and dust proofing</li>
<li>Coverage rate is approximately 2,000 - 2,500 sq ft per gallon</li>
</ul>
Select options
<h5>Features</h5>
<ul>
<li>Solvent-based, mixes with acetone, available in 22 colors</li>
<li>Colors penetrate the surface and never wear off</li>
<li>Will not grind off during resin-grinding stages of polished concrete</li>
<li>Coordinate with AmeriPolish Edge Tints for a seamless wall-to-wall floor solution</li>
<li>For indoor use only</li>
<li>Coverage rate is approximately 400-700 sq ft per gallon</li>
</ul>
Originally designed specifically for polished and exposed concrete, the AmeriPolish Classic dyes penetrate into the surface of the concrete slab for extremely long lasting color that will not wear from daily usage. Classic dyes can be used as a base color or touch up for concrete that has received integral color, dry shake hardenrs, acid stains, or even layered to create a truly unique, mottled effect.
Select options
<h4>Features</h4>
<ul>
<li>Updated formula</li>
<li>Leaves no or very little residual dye on surface saving time on cleaning and dye expense</li>
<li>Doubles the coverage rate of concrete dyes</li>
<li>Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking</li>
<li>Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Breathable barrier prevents staining and seals out moisture</li>
<li>Protects color from UV degradation</li>
<li>Non-yellowing finish will not peel, crack, blister, or blush</li>
<li>Environmentally safe, low VOCs</li>
<li>Coverage rate is approximately 300-600 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Non-topical penetrating sealer</li>
<li>Treated surfaces 'breathe' and do not trap moisture</li>
<li>Excellent stain repellency for residential, commercial, and even industrial applications</li>
<li>Extreme hydrophobic and oil phobic characteristics for maximum stain resistance</li>
<li>Coverage rate is approximately 3,000 - 5,000 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Great alternative where solvent based products are not applicable</li>
<li>Economical penetrating sealer alternative</li>
<li>Non-topical penetrating sealer</li>
<li>Treated surfaces 'breathe' and do not trap moisture</li>
<li>Excellent stain repellency for residential, commercial, and even industrial applications</li>
<li>Extreme hydrophobic and oil phobic characteristics for maximum stain resistance</li>
<li>Coverage rate is approximately 2,000 - 3,000 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Updated formula</li>
<li>Most vibrant concrete dye Ameripolish has ever produced</li>
<li>Mixes with water or acetone and is VOC compliant</li>
<li>Consistent, rich penetrating color with UV stabalizers prevent fading</li>
<li>Surelock is to be applied just before densifying with 3D HS or HSL</li>
<li>Liquid concentrate eliminates the three hour wait to dissolve dye required by other products</li>
<li>For indoor use only</li>
<li>Coverage rate is approximately 400-700 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>RTU - Ready to use</li>
<li>Breathable and fast drying</li>
<li>Oil and chemical resistant</li>
<li>Non-yellowing stain finish</li>
<li>Added mildew and UV protection</li>
<li>Ideal for indoor and outdoor applications</li>
<li>Available in 'Wet Look' or stain finishes</li>
<li>Coverage rate is approximately 300-500 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>RTU - Ready to use</li>
<li>“Wet-Look” finish</li>
<li>breathable and fast drying</li>
<li>Oil and chemical resistant</li>
<li>Non-yellowing stain finish</li>
<li>Added mildew and UV protection</li>
<li>Ideal for outdoor applications</li>
<li>Coverage rate is approximately 500-1000 sq ft per gallon</li>
<li>Can be applied to most cementitious surfaces, other unglazed stone, and masonry surfaces</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Excellent UV resistance</li>
<li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li>
<li>Reducing freeze/thaw damage and salt damage</li>
<li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li>
<li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li>
<li>Easily applied with pump sprayer.</li>
<li>Horizontal or vertical application.</li>
</ul>
Select options
<h4>Highlights</h4>
<ul>
<li>Ready to use and comes with hand sprayer</li>
<li>Biodegradable</li>
<li>Nonhazardous</li>
<li>Will not harm chrome, rubber and most other surfaces when used according to directions</li>
<li>Many uses - concrete forms, concrete and mortar mixers, hand tools, precast equipment, ready-mix trucks, saw-cutting equipment, screeds, power trowels</li>
</ul>
Select options