Hire
-
Day Rate
$82.50 – $412.50 / Day
-
-
<h4>Features</h4>
<ul>
<li>Safely remove or ligthens oil stains from most surfaces</li>
<li>Stops oil from continually wicking to the surface</li>
<li>Does not damage colorants, sealers, or stain protectors</li>
<li>Will not etch polished concrete</li>
<li>Biodegradable, environmentally safe, and VOC compliant</li>
<li>Works best above 55ºF</li>
<li>Coverage rate is approximately 400-600 sq ft per gallon</li>
</ul>
Select options
<h4>Features</h4>
<ul>
<li>Concentrated cleaner that removes daily debris from hard surfaces</li>
<li>Contains chemical analogues to SR2 that reinforce stain protection</li>
<li>Contains no harsh chemicals</li>
<li>Environmentally friendly, biodegradable</li>
<li>Easy to use tilt measure bottle</li>
<li>Low VOC, VOC compliant</li>
<li>Ideal for daily cleaning of polished concrete, terrazzo, epoxy, urethane and other hard surface flooring</li>
</ul>
Add to cart
Hire
-
Day Rate
$60.00 – $14,250.00 / Day
-
-
<h5>Features</h5>
<ul>
<li>RTU - Ready to use</li>
<li>UV stabilizers help protect against fading</li>
<li>Creates water resistant barrier to prevent staining, etching, and protect color</li>
<li>3D SP is a color enhancer for polish concrete floors with dye</li>
<li>Low VOC</li>
<li>Contains 3D densifier properties to aid in hardening and dust proofing</li>
<li>Coverage rate is approximately 2,000 - 2,500 sq ft per gallon</li>
</ul>
Select options
Hire
-
Day Rate
$228.00 – $10,788.00 / Day
-
-
<h4>Features</h4>
<ul>
<li>Improves cure by retaining slab moisture</li>
<li>High penetrating, non film forming</li>
<li>Forms hydrophobic barrier to increase stain repellancy</li>
<li>Improves scratch and abrasion resistance</li>
<li>Reduces efflorescence and minimizes dust for healthier indoor air quality</li>
<li>Replaces traditional Cure & Seal products on new concrete</li>
<li>Coverage rate is approximately 1,000 - 1,500 sq ft per gallon</li>
</ul>
Select options
Hire
-
Day Rate
$61.00 – $2,356.00 / Day
-
-
<h4>Features</h4>
<ul>
<li>Updated formula</li>
<li>Leaves no or very little residual dye on surface saving time on cleaning and dye expense</li>
<li>Doubles the coverage rate of concrete dyes</li>
<li>Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking</li>
<li>Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing</li>
</ul>
Select options
Hire
-
Day Rate
$8.50 – $250.00 / Day
-
-
<h5>Features</h5>
<ul>
<li>Solvent-based, mixes with acetone, available in 22 colors</li>
<li>Colors penetrate the surface and never wear off</li>
<li>Will not grind off during resin-grinding stages of polished concrete</li>
<li>Coordinate with AmeriPolish Edge Tints for a seamless wall-to-wall floor solution</li>
<li>For indoor use only</li>
<li>Coverage rate is approximately 400-700 sq ft per gallon</li>
</ul>
Originally designed specifically for polished and exposed concrete, the AmeriPolish Classic dyes penetrate into the surface of the concrete slab for extremely long lasting color that will not wear from daily usage. Classic dyes can be used as a base color or touch up for concrete that has received integral color, dry shake hardenrs, acid stains, or even layered to create a truly unique, mottled effect.
Select options
Hire
-
Day Rate
$45.00 – $225.00 / Day
-
-
<h3>Features</h3>
<ul>
<li>Excellent UV resistance</li>
<li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li>
<li>Reducing freeze/thaw damage and salt damage</li>
<li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li>
<li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li>
<li>Easily applied with pump sprayer.</li>
<li>Horizontal or vertical application.</li>
</ul>
Select options