Related products

• 

  Ameripolish Penetrating Agent Plus 30oz

  <h4>Features</h4> <ul> <li>Improves dye penetration</li> <li>Minimizes surface residue and reduces materials waste</li> <li>Very easy to use, just add 4oz to a premixed gallon of dye</li> <li>Extends the drying time of Ameripolish solvent-based dyes</li> <li>Can be used on most cementious surfaces</li> <li>Ideal for very dense or hard concrete where normal dye will not penetrate</li> <li>Comes in a convenient and easy container that helps you mix the right ratio every time</li> </ul>

  Add to quote
• 

  Ameripolish – Edge Tint Part B

  <h4>Features</h4> <ul> <li>Available in 22 AmeriPolish coordinating colors</li> <li>Creates uniform edges and borders to eliminate edge work</li> <li>Resists most oil, grease and food stains</li> <li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li> </ul>

  Select options
• 

  Ameripolish – Color Juice 3D Colorant Concentrate (Part B)

  <h3>Features</h3> <ul> <li>Excellent UV resistance</li> <li>In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color</li> <li>Reducing freeze/thaw damage and salt damage</li> <li>May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen</li> <li>May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.</li> <li>Easily applied with pump sprayer.</li> <li>Horizontal or vertical application.</li> </ul>

  Select options
• 

  Ameripolish Oil Ingester System

  <h4>Features</h4> <ul> <li>Safely remove or ligthens oil stains from most surfaces</li> <li>Stops oil from continually wicking to the surface</li> <li>Does not damage colorants, sealers, or stain protectors</li> <li>Will not etch polished concrete</li> <li>Biodegradable, environmentally safe, and VOC compliant</li> <li>Works best above 55ºF</li> <li>Coverage rate is approximately 400-600 sq ft per gallon</li> </ul>

  Select options
• 

  Wagman Eco Coat

  <h4>Highlights</h4> <ul> <li>Penetrates, doesn't leave oily film</li> <li>V.O.C. compliant / low odor</li> <li>Environmentally safe and water soluble</li> <li>Non-staining and non-dusting</li> <li>Meets Army Corp. of Engineers specs</li> <li>Can be used as a rust inhibitor</li> <li>Safe for use on most surfaces</li> <li>Will not rinse off in rain</li> <li>Economical concentrate</li> <li>Concentrate reduces shipping cost</li> <li>Easy to mix and apply, suggested mix ratios vary with applications</li> <li>Virtually non-stick</li> </ul>

  Select options
• 

  Ameripolish – Edge Tint Part A

  <h4>Features</h4> <ul> <li>Available in 22 AmeriPolish coordinating colors</li> <li>Creates uniform edges and borders to eliminate edge work</li> <li>Resists most oil, grease and food stains</li> <li>Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats</li> </ul>

  Add to quote
• 

  Ameripolish PCA Curing Agent

  <h4>Features</h4> <ul> <li>Improves cure by retaining slab moisture</li> <li>High penetrating, non film forming</li> <li>Forms hydrophobic barrier to increase stain repellancy</li> <li>Improves scratch and abrasion resistance</li> <li>Reduces efflorescence and minimizes dust for healthier indoor air quality</li> <li>Replaces traditional Cure & Seal products on new concrete</li> <li>Coverage rate is approximately 1,000 - 1,500 sq ft per gallon</li> </ul>

  Select options
• 

  Ameripolish EZ Etch

  <h4>Features</h4> <ul> <li>Opens the concrete to prepare it for penetrating agents</li> <li>Safe for interior and exterior environments</li> <li>Biodegradable, low odor, and non-flammable</li> <li>Can be used safety on new or restoration construction, industrial facilities, commercial spaces, food packaging facilities, and residential areas</li> <li>Coverage rate is approximately 200 - 400 sq ft per gallon</li> </ul>

  Select options