-
(SMI)6″x2″ Maroon Caster ASSM
(SMI)6"x2" MAROON CASTER ASSM included with 3392601 or 3393771 Type: Swivel Wheel Dimensions: 6" x 2" Grease Fitting: Wheel and Base Recommended to replace: NSS 3392591, NSS 3394571 Recommendation to application: NSS Charger 2717 AB/DB, NSS Wrangler 2730/DB, NSS Wrangler 3330/DB, NSS Charger 2022 ABRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
1/4 Npt Hex Nipple, Brass
1/4 Npt Hex Nipple, BrassRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
120V on Board Charger Cord
120V on Board Charger CordRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
13-14 inch (individual) Poly Back Nylon Grit Filled Brush
13-14 inch (individual) Poly Back Nylon Grit Filled Brush - Heavy Concrete ScrubbingRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
14-in Poly Back Nylon Brush – light to medium scrubbing
14-in Poly Back Nylon Brush - light to medium scrubbingRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
17″ Nylon Brush 0.018
17-in Nylon Brush with 0.018 width Nylon Bristles - softer brush for (set of two) use on polished concrete. 2 included with rental of NSS 3330Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
17/18-in polyblock nylon brush
17/18-in polyblock nylon brush - light to medium scrubbingRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
17/18-in polyblock stratagrit bush – heavy concrete scrubbing
17/18-in polyblock stratagrit bush - heavy concrete scrubbingRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
17/18″ Polyblock Scrub Grit Brush, Light Scrubbing
17/18" Polyblock Scrub Grit Brush, Light ScrubbingRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
20″ Nylon Brush .018
20-in Nylon Brush with 0.018 width Nylon Bristles - softer brush for use on polished concrete. 1 included with rental of NSS 2016Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
20″ Poly BK NY-Fill brush (light to medium scrubbing)
20" Poly BK NY-Fill brush (light to medium scrubbingRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
20″ Poly BK NY-Grit brush (stripping and concrete scrubbing)
20-in Poly Back Nylon Grit Fill Scrub Brush - stripping and concrete scrubbing. 1 included with rental of 2016Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
36V Drive Controller CNTRL RPLT KIT, 36V 70A IDRIV
36V Drive Controller CNTRLR RPLT KIT, 36V 70A IDRIV - part for NSS Auto ScrubberRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
47 Rear Blade Red for 3330
47 Rear Blade Red for 3330Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
5″ Arrow Cup Wheel Non Threaded
Hire
-
Day Rate
$46.00 / Day
5" Arrow Cup Wheel Non ThreadedAdd to cart -
-
5″ Arrow Cup Wheel Threaded Ultra Premium
Hire
-
Day Rate
$55.00 / Day
5" Arrow Cup Wheel Non ThreadedAdd to cart -
-
5″ Easy Edge
Hire
-
Day Rate
$99.00 / Day
Easy Edges
• Aggressive grind with superb fnish. • Blends well with the foor. • Eliminates gouging. • One tool for hard and soft concrete. -
-
5″ Honeycomb Dry Polishing Pad for Granite, Super Premium
Hire
-
Day Rate
$17.00 / Day
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
6-V. 235 Amp Hour Battery (6-required for NSS 3330)
6-V. 235 Amp Hour Battery (6-required for NSS 3330)Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
62 3/8″ Rear Squeegee Tennant
62 3/8" Rear Squeegee TennantRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
7″ Arrow Cup Premium Non-Threaded
Hire
-
Day Rate
$66.00 / Day
7" Arrow Cup Premium Non-ThreadedAdd to cart -
-
7″ Easy Edge
Hire
-
Day Rate
$130.00 / Day
Easy EdgesSelect options- Aggressive grind with superb fnish.
- Blends well with the foor.
- Eliminates gouging.
- One tool for hard and soft concrete
-
-
7″ Honeycomb Dry Polishing Pad for Granite-Super Premium
Hire
-
Day Rate
$33.00 / Day
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
7″ Polishing Pad Premium Dry
Hire
-
Day Rate
$37.00 – $52.00 / Day
Premium Concrete, Terrazzo, Engineering Stone, Marble DRYSelect optionsFree Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Abrasive Wheels Coating Removal (Tec Abrasive Disk – Zec Wheel)
Hire
-
Day Rate
$7.50 – $10.00 / Day
-
-
Ameripolish – 3D SP E
Hire
-
Day Rate
$8.00 – $309.00 / Day
3D SP E™ is a breathable semi-penetrating/semitopical sealer that helps to protect surfaces against stains and etching. 3D SP E™ creates a water-resistant barrier that prevents liquids from infiltrating the surface, protecting against staining and color dispersion.Select options- Ready to use (RTU).
- UV stabilizers help protect against fading.
- Creates water-resistant barrier to prevent staining, etching, and protect color.
- 3D SP is a color enhancer for polish concrete floors with dye.
- Contains 3D densifier properties to aid in hardening and dust-proofing.
-
-
Ameripolish – 5 Gallon Orange Surelock Dye
Hire
-
Day Rate
$225.00 / Day
FEATURES
- Updated formula
- Most vibrant concrete dye Ameripolish has ever produced
- Mixes with water or acetone and is VOC compliant
- Consistent, rich penetrating color with UV stabalizers prevent fading
- Surelock is to be applied just before densifying with 3D HS or HSL
- Liquid concentrate eliminates the three hour wait to dissolve dye required by other products
- For indoor use only
- Coverage rate is approximately 400-700 sq ft per gallon
-
-
Ameripolish – Black Sprayer Tip #10
Hire
-
Day Rate
$11.02 / Day
Black Sprayer Tip #10 for pump sprayer, Acetone sprayer tip 10.4 gallon/hr Coarse Mist"Add to cart -
-
Ameripolish – Brown Sprayer Tip
Hire
-
Day Rate
$11.02 / Day
Brown Sprayer Tip for pump sprayer, Acetone sprayer tip 12.6 gallon/hr Heavy Mist"Add to cart -
-
Ameripolish – Classic Hard Samples Kit
Hire
-
Day Rate
$120.00 / Day
Ameripolish Classic Hard Samples KitAdd to cart -
-
Ameripolish – Color Dye Sample Square
Hire
-
Day Rate
$10.00 / Day
Ameripolish - Color Dye Sample Square, Sample BlockSelect options -
-
Ameripolish – Color Juice 3D Colorant Concentrate (Part B)
Hire
-
Day Rate
$45.00 – $225.00 / Day
Features
- Excellent UV resistance
- In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color
- Reducing freeze/thaw damage and salt damage
- May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen
- May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.
- Easily applied with pump sprayer.
- Horizontal or vertical application.
-
-
Ameripolish – Color Juice 3D Complete Set of Sample Size
Hire
-
Day Rate
$126.00 – $168.00 / Day
FEATURES
- Created for outdoor use but can be used indoors
- Fast, easy application
- Available in 14 colors
- Water based and UV stable
- Low VOC
- Must be used with EZ Etch Concrete Surface Etching Agent and X-Link WB Surface Sealer
- Coverage rate is approximately 400-800 sq ft per gallon
-
-
Ameripolish – Color Juice 3D Sample Size
Hire
-
Day Rate
$8.50 / Day
FEATURES
- Created for outdoor use but can be used indoors
- Fast, easy application
- Available in 14 colors
- Water based and UV stable
- Low VOC
- Must be used with EZ Etch Concrete Surface Etching Agent and X-Link WB Surface Sealer
- Coverage rate is approximately 400-800 sq ft per gallon
-
-
Ameripolish – Edge Tint Part A
Hire
-
Day Rate
$55.00 / Day
Features
- Available in 22 AmeriPolish coordinating colors
- Creates uniform edges and borders to eliminate edge work
- Resists most oil, grease and food stains
- Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats
-
-
Ameripolish – Edge Tint Part B
Hire
-
Day Rate
$69.00 / Day
Features
- Available in 22 AmeriPolish coordinating colors
- Creates uniform edges and borders to eliminate edge work
- Resists most oil, grease and food stains
- Coverage rate is approximately 800-1,000 linear feet, four inches wide with two coats
-
-
Ameripolish – GPR C Pad 10″ – 1 Pack
Hire
-
Day Rate
$60.00 – $70.00 / Day
GPR00-10-1 #00 GPR C Pad 10" - 1 Pack GPR0-10-1 #0 GPR C Pad 10" - 1 Pack GPR1-10-1 #1 GPR C Pad 10" - 1 Pack GPR2-10-1 #2 GPR C Pad 10" - 1 Pack GPR3-10-1 #3 GPR C Pad 10" - 1 Pack -
-
Ameripolish – GPR C Pad 9″ – 1 Pack
Hire
-
Day Rate
$53.00 – $62.00 / Day
GPR3-9-1 #3 GPR C Pad 9" - 1 Pack GPR2-9-1 #2 GPR C Pad 9" - 1 Pack GPR1-9-1 #1 GPR C Pad 9" - 1 Pack GPR0-9-1 #0 GPR C Pad 9" - 1 Pack GPR00-9-1 #00 GPR C Pad 9" - 1 Pack -
-
Ameripolish – Green Sprayer Tip #4
Hire
-
Day Rate
$11.02 / Day
Green Sprayer Tip #4 for Pump sprayer, Acetone Sprayer Tip 4.2 gallon/hr Very Fine Mist"Add to cart -
-
Ameripolish – Grey Sprayer Tip #8
Hire
-
Day Rate
$11.02 / Day
Grey Sprayer Tip for Pump Sprayers, Acetone sprayer tip 8.4 gallon/hr Regular Mist"Add to cart -
-
Ameripolish – Red Sprayer Tip #6
Hire
-
Day Rate
$11.02 / Day
Red Sprayer tip for Pump Sprayer, Acetone sprayer tip 6.4 gallon/hr Fine Mist"Add to cart -
-
Ameripolish – Sprayer Tip Kit
Hire
-
Day Rate
$50.00 / Day
"Sprayer Tip Kit. Includes: Green, Red, Black, Brown, Gray, and Strainer Check Valve This Tip Kit includes 5 different spray tips and one strainer tip. Green Tip# 4 (4.2 gallon/hr, very fine mist) Red Tip# 6 (6.4 gallon/hr, fine mist) Gray Tip# 8 (8.4 gallon/hr, regular mist) Black Tip# 10 (10.4 gallon/hr, coarse mist) Brown Tip# 12 (12.6 gallon/hr, heavy mist) Strainer Tip"Add to cart -
-
Ameripolish – SR2 Sample Size
Hire
-
Day Rate
$8.00 / Day
Ameripolish SR2 is a solvent-based sealer that penetrates deep into dense, hard, and non-porous concrete surfaces to create a barrier that repels both oil- and water-based stains. SR2 has an extremely small molecular size, so it reaches deeper into the surface than other products, providing more complete protection. It doesn't form a typical film-like "guard" stain protection on the surface, but rather a breathable, sub-surface barrier that provides maximum stain resistance. SR2 offers extreme hydropobic and oil phobic characteristics, ensuring it can repel stains found in residential settings as well as commercial and even industrial applications. Ameripolish SR2 can be used as a stand-alone products, however, we recommend using it in conjunction with AmeriPolish 3D HS or 3D HSL Densifiers for maximum results. Coverage: approximately 3,000 - 5,000 sq ft per gallon.Add to cart -
-
Ameripolish – Strip & Clean 1 Gallon RTU Ships Hazmat-Fedex Ground or LTL
Hire
-
Day Rate
$45.00 / Day
Features
- Grind-free sealer removal
- Formulated specifically to remove WB Surface Sealer, SureLock Stain Shield, and 3D SP
- Safely remove an improperly installed 'guard' type product to reinstall correctly
- Ideal for preparation prior to dye reapplication
- Coverage rate is approximately 400-600 sq ft per gallon
-
-
Ameripolish – SwissMex Acetone Sprayer
Hire
-
Day Rate
$258.71 / Day
Features:
Material Handling: directly from the pump sprayer Maximum PSI: 30psi / 40psi (depending on sprayer size) Equipped with a convenient carry strap Viton Pumps support the following materials: solvents and hydrocarbons such as: curing compounds, acetone, form release, form oils, diesel, xylene-sealers and water-based sealers EPDM pumps support the following materials: alcohol and ketones, such as acetone dye, soaps and water-based sealersSpecifications:
Patriot Spray Safe System 150 NOT C02 Compatible 1 or 3.5 gallon capacity Material Flow Rate: dependent on spray tip size -
-
Ameripolish 3D HSL Concrete Densifier
Hire
-
Day Rate
$108.15 – $5,407.50 / Day
Features
- Hardens deep within the slab to improve durability even after grinding
- Contains UV stabalizers to help protect color from fading
- Ideal for new construction, existing concrete, and diamond pad burnishing
- Enhances polished color, gloss and clarity
- Provides superior stain resistance especially when combined with SR2 Sealer
- Coverage rate is approximately 600 - 800 sq ft per gallon
-
-
Ameripolish 3D SP
Hire
-
Day Rate
$60.00 – $14,250.00 / Day
Features
- RTU - Ready to use
- UV stabilizers help protect against fading
- Creates water resistant barrier to prevent staining, etching, and protect color
- 3D SP is a color enhancer for polish concrete floors with dye
- Low VOC
- Contains 3D densifier properties to aid in hardening and dust proofing
- Coverage rate is approximately 2,000 - 2,500 sq ft per gallon
-
-
Ameripolish AquaShield
Hire
-
Day Rate
$123.60 – $6,180.00 / Day
Features
- Ideal for use on any concrete or masonry surface indoor or outdoor
- Extremely long-lasting
- Water based, fast drying
- Low VOC and non flammablet
- Coverage rate is approximately 400-2,000 sq ft per gallon
-
-
Ameripolish Classic Dye
Hire
-
Day Rate
$8.50 – $250.00 / Day
Features
- Solvent-based, mixes with acetone, available in 22 colors
- Colors penetrate the surface and never wear off
- Will not grind off during resin-grinding stages of polished concrete
- Coordinate with AmeriPolish Edge Tints for a seamless wall-to-wall floor solution
- For indoor use only
- Coverage rate is approximately 400-700 sq ft per gallon
-
-
Ameripolish ColorSolve
Hire
-
Day Rate
$55.00 – $2,141.00 / Day
Features
- Updated formula
- Leaves no or very little residual dye on surface saving time on cleaning and dye expense
- Doubles the coverage rate of concrete dyes
- Lower evaporation rate allowing the use of Ameripolish® microfiber mop pad saving time on taping and masking
- Allows concrete dyes to be applied at higher grit levels such as 800 or 1,500 grit for color enhancement or refurbishing
-
-
Ameripolish EZ Etch
Hire
-
Day Rate
$45.00 – $2,475.00 / Day
Features
- Opens the concrete to prepare it for penetrating agents
- Safe for interior and exterior environments
- Biodegradable, low odor, and non-flammable
- Can be used safety on new or restoration construction, industrial facilities, commercial spaces, food packaging facilities, and residential areas
- Coverage rate is approximately 200 - 400 sq ft per gallon
-
-
Ameripolish EZ-Kut Grinding Agent
Hire
-
Day Rate
$42.51 – $10,355.00 / Day
Features
- Speeds up the time spent on initial cut on hard, dense concrete
- Helps with exposing large aggregate faster than dry only or standard wet methods
- Maximizes efficiency, increases productivity and extends the life of diamond tooling
- Reduces labor costs
- Water-based and VOC compliant
- Shortens the project time-line
- Unique DRY method avoiding the hassle of dealing with slurry
-
-
Ameripolish Oil Ingester System
Hire
-
Day Rate
$82.50 – $412.50 / Day
Features
- Safely remove or ligthens oil stains from most surfaces
- Stops oil from continually wicking to the surface
- Does not damage colorants, sealers, or stain protectors
- Will not etch polished concrete
- Biodegradable, environmentally safe, and VOC compliant
- Works best above 55ºF
- Coverage rate is approximately 400-600 sq ft per gallon
-
-
Ameripolish Paver Sealer
Hire
-
Day Rate
$35.45 – $7,747.50 / Day
Features
- Breathable barrier prevents staining and seals out moisture
- Protects color from UV degradation
- Non-yellowing finish will not peel, crack, blister, or blush
- Environmentally safe, low VOCs
- Coverage rate is approximately 300-600 sq ft per gallon
-
-
Ameripolish PCA Curing Agent
Hire
-
Day Rate
$199.00 – $9,499.00 / Day
Features
- Improves cure by retaining slab moisture
- High penetrating, non film forming
- Forms hydrophobic barrier to increase stain repellancy
- Improves scratch and abrasion resistance
- Reduces efflorescence and minimizes dust for healthier indoor air quality
- Replaces traditional Cure & Seal products on new concrete
- Coverage rate is approximately 1,000 - 1,500 sq ft per gallon
-
-
Ameripolish Penetrating Agent Plus 30oz
Hire
-
Day Rate
$42.00 / Day
Features
- Improves dye penetration
- Minimizes surface residue and reduces materials waste
- Very easy to use, just add 4oz to a premixed gallon of dye
- Extends the drying time of Ameripolish solvent-based dyes
- Can be used on most cementious surfaces
- Ideal for very dense or hard concrete where normal dye will not penetrate
- Comes in a convenient and easy container that helps you mix the right ratio every time
-
-
Ameripolish PG-7K Polishable Grout Coating System Part A & B Kit
Hire
-
Day Rate
$105.00 / Day
-
-
Ameripolish Rejuvenating Cleaner
Hire
-
Day Rate
$550.00 / Day
Features
- Concentrated cleaner that removes daily debris from hard surfaces
- Contains chemical analogues to SR2 that reinforce stain protection
- Contains no harsh chemicals
- Environmentally friendly, biodegradable
- Easy to use tilt measure bottle
- Low VOC, VOC compliant
- Ideal for daily cleaning of polished concrete, terrazzo, epoxy, urethane and other hard surface flooring
-
-
Ameripolish Rejuvenating Cleaner Concentrate 32 oz
Hire
-
Day Rate
$35.00 / Day
Features
- Concentrated cleaner that removes daily debris from hard surfaces
- Contains chemical analogues to SR2 that reinforce stain protection
- Contains no harsh chemicals
- Environmentally friendly, biodegradable
- Easy to use tilt measure bottle
- Low VOC, VOC compliant
- Ideal for daily cleaning of polished concrete, terrazzo, epoxy, urethane and other hard surface flooring
-
-
Ameripolish SR2 Concrete Sealer SB
Hire
-
Day Rate
$142.00 – $6,250.00 / Day
Features
- Non-topical penetrating sealer
- Treated surfaces 'breathe' and do not trap moisture
- Excellent stain repellency for residential, commercial, and even industrial applications
- Extreme hydrophobic and oil phobic characteristics for maximum stain resistance
- Coverage rate is approximately 3,000 - 5,000 sq ft per gallon
-
-
Ameripolish SR2 Concrete Sealer WB
Hire
-
Day Rate
$76.00 – $19,000.00 / Day
Features
- Great alternative where solvent based products are not applicable
- Economical penetrating sealer alternative
- Non-topical penetrating sealer
- Treated surfaces 'breathe' and do not trap moisture
- Excellent stain repellency for residential, commercial, and even industrial applications
- Extreme hydrophobic and oil phobic characteristics for maximum stain resistance
- Coverage rate is approximately 2,000 - 3,000 sq ft per gallon
-
-
Ameripolish SureLock Dye
Hire
-
Day Rate
$8.50 – $225.00 / Day
Features
- Updated formula
- Most vibrant concrete dye Ameripolish has ever produced
- Mixes with water or acetone and is VOC compliant
- Consistent, rich penetrating color with UV stabalizers prevent fading
- Surelock is to be applied just before densifying with 3D HS or HSL
- Liquid concentrate eliminates the three hour wait to dissolve dye required by other products
- For indoor use only
- Coverage rate is approximately 400-700 sq ft per gallon
-
-
Ameripolish X Link WB Surface Sealer
Hire
-
Day Rate
$31.00 – $7,550.00 / Day
Features
- RTU - Ready to use
- Breathable and fast drying
- Oil and chemical resistant
- Non-yellowing stain finish
- Added mildew and UV protection
- Ideal for indoor and outdoor applications
- Available in 'Wet Look' or stain finishes
- Coverage rate is approximately 300-500 sq ft per gallon
-
-
Ameripolish X-Link E WL Surface Sealer
Hire
-
Day Rate
$39.80 – $9,415.80 / Day
Features
- RTU - Ready to use
- “Wet-Look” finish
- breathable and fast drying
- Oil and chemical resistant
- Non-yellowing stain finish
- Added mildew and UV protection
- Ideal for outdoor applications
- Coverage rate is approximately 500-1000 sq ft per gallon
- Can be applied to most cementitious surfaces, other unglazed stone, and masonry surfaces
-
-
Aztec – ProScrub 20″ Walk-Behind Auto Scrubber
Hire
-
Day Rate
$3,908.00 – $4,158.00 / Day
Features
- Brush driven auto scrubber has a 30" follow behind squeegee recovers 100% of solution laid down.
- Reduce labor by putting solution down, scrubbing, and recovering that solution in one pass.
- Keep your facilities looking fresh and clean by setting routine scrubbing schedules.
- 12 gallon solution tank carries plenty of solution to keep you constantly cleaning.
- 24 volt battery powered system offers up to 3 hours of maximum scrub time, plenty of time for cleaning any gas station or convenience store.
- 1 year commercial warranty on the full scrubber.
-
-
Bartell Global – Alpha Floor Grinder, 9″Single Head, 1.5HP 110Volt – Single Phase
Hire
-
Day Rate
$3,396.75 / Day
Features
- Dust free due to an integrated dust port (Use Ermator S13)
- 1680 RPM
- Variable speed option
- Flexible drive coupling
- Wide variety of tooling available for cutting and coating removal
- Carry handle for easy transport
- Lightweight design
- Grind up close to walls
- Built for rental
- Reliable & safe
-
-
Bartell Global – DFG280 Single Head Grinder; 1.5HP 100 volt – Single Phase
Hire
-
Day Rate
$3,507.00 / Day
Features
-
NEW Floating head design
-
10” Grinding Head
-
Folding Handle, with multiple settings for height adjustment
-
Built in Lifting Handles
-
Edge grinding capabilities on BOTH sides
-
“Wall Walking” roller bearing for edge work
-
Compact and Robust Design
-
Flexible ‘moreflex’ coupling
-
Dust Free Vac Port
-
Compatible with TMAG or standard 10” diamond plate tooling
-
-
Bartell Global – Foot Pedal Power Supply
Foot Pedal Power SupplyRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Bartell Global – Foot Pedal, Modified, T-2100EI/XME/T3000EI
Foot Pedal, Modified, T-2100EI/XME/T3000EIRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Bartell Global – HD1 HEPA Vacuum – 110V Single Phase
Hire
-
Day Rate
$1,816.50 / Day
Features
- The HD1 is a one-motor HEPA dust extractor, that features a two-stage filtering system comprised of a main conical filter and a HEPA filter
- “Reverse-air” jet-pulse filter cleaning system – effectively cleans and removes dust build-up on the filters
- Easy to use “Inlet closure door” – eliminates the need to remove hoses when pulsing and cleaning filters
- Easily connects to hand-operated power tools to extract concrete dust while cutting and grinding
- Equipped with a “Continuous Bag” disposal system for effective dust collecting
-
-
Bartell Global – Hornet 8″ Shotblaster 2.8HP 110 Volt, Single Phase
Hire
-
Day Rate
$9,602.00 / Day
Technical Data
- Working Width: 200 mm
- Voltage: 115/230 V
- Frequency: 50 Hz
- Phase: 1
- Current Consumption: 20/10 A
- Motor Rating: 2.1/2.2 kW
- Motor nominal Current: 20/10 A
- Motor Rotation Speed: 8500 rpm
- Dust Port Diameter: 70 mm
- Shot Size: S330 Only
-
-
Bartell Global – Innovatech Terminator T3000EI AGM Battery Powered Ride-On Floor Scraper
Hire
-
Day Rate
$47,408.00 / Day
Features
- Redesigned frame
- Sleek, low-profile
- Extremely high removal rates
- Up to 80-90% of coverings removed on first pass
- Fits through any standard doorway or elevator
- Zero emissions
- Limited maintenance
- Zero memory batteries
- Forklift channels for quick and easy battery maintenance
Production Rates
- Carpet: Up to 3500 sq. ft. / hour
- VCT/VAT: Up to 3500 sq. ft. / hour
- Sheet Vinyl: Up to 3500 sq. ft. / hour
- Glue Down Hardwood: Up to 2000 sq. ft. / hour
- Elastomeric Coatings: Up to 2400 sq. ft. / hour
- Ceramic Tile: Up to 1900 sq. ft. / hour
Inclusions:
- 81-0024 - Terminator Swivel Head 26" Jaw
- 81-0027 - Terminator Swivel Head 13" Jaw
- 81-0031 - Terminator Swivel Head Ceramic Tile Tooth Holder
- 81-0333 - Saber Claw Carbide Holder (2" & 4")
- 81-0340 - Terminator Swivel Head Travel Dolly, 6" Caster Wheels
- 70-0015 - Terminator 10 Blade Variety Pack
- 83-0001 - InnovaPro Milled Tile Tooth
- 83-0014 - Saber Claw 2" Carbide Tile Tool Bit
- 81-0012 - T-3000EI 110V Portable Battery Charger
- 81-0681 - Terminator Battery Charger 220V 60Amp, Programmable
- 62-0027 - Terminator Crate
-
-
Bartell Global – Innovatech Terminator T3000EI Battery Powered Ride-On Floor Scraper
Hire
-
Day Rate
$44,883.00 / Day
Features
- Redesigned frame
- Sleek, low-profile
- Extremely high removal rates
- Up to 80-90% of coverings removed on first pass
- Fits through any standard doorway or elevator
- Zero emissions
- Limited maintenance
- Zero memory batteries
- Forklift channels for quick and easy battery maintenance
Production Rates
- Carpet: Up to 3500 sq. ft. / hour
- VCT/VAT: Up to 3500 sq. ft. / hour
- Sheet Vinyl: Up to 3500 sq. ft. / hour
- Glue Down Hardwood: Up to 2000 sq. ft. / hour
- Elastomeric Coatings: Up to 2400 sq. ft. / hour
- Ceramic Tile: Up to 1900 sq. ft. / hour
-
-
Bartell Global – Portable Power Generator BG2800A, 110V 1Ø, 7HP – 2500W Continuous
Hire
-
Day Rate
$1,103.00 / Day
Features
- AVR – Auto Voltage Regulation for “clean power”. Keeps voltage within 3% (+/-) of rated voltage.
- Brushless Alternator – No brushes to change, unlike brush type alternators which require replacement every 200 hours.
- Genuine CooperTM brand GFCI Outlets – High quality electrical components that eliminate the possibility of shock to the operator.
- Master Circuit Breaker – Eliminates damage of alternator and components.
- Voltage Meter – For easy monitoring of generator performance. 12 volt DC Outlet – provides 6.2 amps of DC power.
- ETL Certification – All electrical components are built to North American safety standards.
- EPA Certified Overhead Valve Engines – Built to meet EPA regulations for North America.
- Large Fuel Tanks – Ensures 8 hours of run time on a single tank.
- Standard Wheel Kits – for ease of maneuverability.
- Roll Cage – Ensures protection of all components within the frame.
- Electric Start (7kw Only) – For ease of starting and includes sealed battery.
-
-
Bartell Global – Portable Power Generator BG5000A, 110V/230V 1Ø, 16HP – 4500W Continuous
Hire
-
Day Rate
$1,586.00 / Day
Features
- AVR – Auto Voltage Regulation for “clean power”. Keeps voltage within 3% (+/-) of rated voltage.
- Brushless Alternator – No brushes to change, unlike brush type alternators which require replacement every 200 hours.
- Genuine CooperTM brand GFCI Outlets – High quality electrical components that eliminate the possibility of shock to the operator.
- Master Circuit Breaker – Eliminates damage of alternator and components.
- Voltage Meter – For easy monitoring of generator performance. 12 volt DC Outlet – provides 6.2 amps of DC power.
- ETL Certification – All electrical components are built to North American safety standards.
- EPA Certified Overhead Valve Engines – Built to meet EPA regulations for North America.
- Large Fuel Tanks – Ensures 8 hours of run time on a single tank.
- Standard Wheel Kits – for ease of maneuverability.
- Roll Cage – Ensures protection of all components within the frame.
- Electric Start (7kw Only) – For ease of starting and includes sealed battery.
-
-
Bartell Global – Portable Power Generator BG7000EA, 110V/230V 1Ø, 16HP – 6500W Continuous
Hire
-
Day Rate
$1,896.00 / Day
Features
- AVR – Auto Voltage Regulation for “clean power”. Keeps voltage within 3% (+/-) of rated voltage.
- Brushless Alternator – No brushes to change, unlike brush type alternators which require replacement every 200 hours.
- Genuine CooperTM brand GFCI Outlets – High quality electrical components that eliminate the possibility of shock to the operator.
- Master Circuit Breaker – Eliminates damage of alternator and components.
- Voltage Meter – For easy monitoring of generator performance. 12 volt DC Outlet – provides 6.2 amps of DC power.
- ETL Certification – All electrical components are built to North American safety standards.
- EPA Certified Overhead Valve Engines – Built to meet EPA regulations for North America.
- Large Fuel Tanks – Ensures 8 hours of run time on a single tank.
- Standard Wheel Kits – for ease of maneuverability.
- Roll Cage – Ensures protection of all components within the frame.
- Electric Start (7kw Only) – For ease of starting and includes sealed battery.
-
-
Bartell Global – Potentiometer (Terminator T-2100XME)
Potentiometer (Terminator T-2100XME)Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Bartell Global – Terminator T2500 Pro Propane Powered Ride-On Floor Scraper
Hire
-
Day Rate
$34,729.00 / Day
Features
- High removal rates
- 25 HP Kohler Motor
- Easily fits through any standard doorway or onto elevators
- Smooth variable-speed joystick control
- Robust steel frame construction with maintenance friendly access panels
- Fully enclosed design protects hydraulics and major components
- Propane powered
- Works effectively in small spaces
- Hour meter
- Fits through standard doorway
- Quick-change swivel tool holder
- Integrated fork lift channels
- Parking brake
- Multiple tooling options for removal of all types of flooring
- Adjustable wheel scraper blades
- Non-marking tires
- LED headlight for improved visibility
- Made in the USA
-
-
Bartell Global – Terminator T5500 Pro Propane Ride-On Floor Scraper
Hire
-
Day Rate
$56,212.00 / Day
Features
- Extremely high removal rates
- 55hp 1.6l Kubota lpg engine
- Easily fits through any standard doorway or onto elevators
Benefits of the Terminator T-5500PRO Floor Removal System
- Ergonomic handle controls for all operations
- Head light for improved visibility
- Meets tier 2 CARB & EPA emissions standards
- “Cool Flow” hydraulics for consistent performance
- Up to 1,745 ft. lbs of wheel torque
- Hinged hood and door panels for easy access
- Quick change angle adjustment jaw for improved performance and weight distribution
-
-
Bartell Global – The Bull Floor Stripper/Scraper – 115 Volt – Single Phase
Hire
-
Day Rate
$14,900.00 / Day
Features
- Unique self-propulsion can be used either manually or in automatic mode
- Ram action is a direct drive application
- Brushless motor
- Height adjustable and vibration dampened handle maximizes operator comfort
- Stable, balanced lifting point
- Inboard weights are adjustable to three positions, ensuring maximum blade pressure for difficult removals
- Removable weights and well-balanced design enhance transportability
-
-
Battery for remote control pack (Serial# specific)
Battery for remote control pack (Serial# specific)Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Bearing Holder (Wacker Part)
Bearing Holder (Wacker Part)Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Bearing House BG007815
Bearing House BG007815Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Bearing Unit 6205 2RS
Bearing Unit 6205 2RSRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Bearing Unit Complete RH
Bearing Unit Complete RHRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Belt, Lower Toothed 780 Ultra PRO
Belt, Lower Toothed 780/Ultra/PRORead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Belt/1280 X 8M BMG 780 (Middle Belt 780)
BELT/1280 X 8M BMG 780 (Middle Belt 780)Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Blade Squeegee Front Tennant
Blade Squeegee Front TennantRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Blade/Scraper and Carpet Removal/Slitting, Tapped Edge
Hire
-
Day Rate
$20.60 – $27.10 / Day
Scraper blades are used for:
- Concrete cleaning, thin coating, removal and glue removal
- Removal of VCT or ceramic tiles
- Removal of carpet or wood flooring
- Removal of mastics or heavy adhesives
-
-
BMC-335 Bearing (Plate Side)
BMC-335 Bearing (Plate Side)Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
BMC-335 Bearing Only (axle side)
BMC-335 Bearing Only (axle side)Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
BMC-335 Bearing Unit Complete Plate Side
BMC-335 Bearing Plate SideRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
BMG 780 Wheel Axle
Wheel Axle for Diamatic BMG 780Read more- Wheel Axle Left 780
- Wheel Axle Right 780
CALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
BMG-300 Bolt GB/T 834-1988 M6x16
BMG-300 Bolt GB/T 834-1988 M6x16Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
BMG-780 UltraPro Front Wheel Transport Kit
BMG-780 UltraPro Front Wheel Transport KitRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
BMS 220ADB complete wheel assembly
BMS 220ADB complete wheel assemblyRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
BMS-220 Debris Deflector
BMS-220 Debris DeflectorRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
BMS-220 Oil Filter Element Needs Part E10772
BMS-220 Oil Filter Element Needs Part E10772Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
BMS-220 Oil Filter Head
BMS-220 Oil Filter HeadRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Bolt on Plate Bearing MK875
BOLT-ON PLATE BEARING MK875 PART OF LP230 KIT Plate bearing mounts were designed specifically for use on a power trowel with PRODIACC pads to provide planetary action which is ideal for processing concrete. Simply attach the GHP pad driver to the plate bearing mount using supplied hardware and install onto each trowel arm. Mounts should be installed according to directions on label.Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Boride – 21″ Burnishing Pad with Diamonds
Hire
-
Day Rate
$46.00 / Day
Boride - 21" Burnishing Pad with DiamondsSelect options -
-
Boride – 3″ 4 Segment – First Cut STANDARD (No Boss)
Hire
-
Day Rate
$62.00 / Day
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Boride – 3″ 8 Segment Ceramic Premium Transitional STANDARD (No Boss)
Hire
-
Day Rate
$76.00 / Day
1 x Transitional Ceramic 75mm Pad. Produced using Boride’s Blue Star Diamond Technology each Premium 8 segment pad is designed to transition from metal bond diamond concrete grinding to resin based concrete polishing. Transitional diamond segments eliminate scratches left by metal bond segments, potentially eliminating several steps in the concrete polishing process.Select optionsFeatures and Benefits
- Reduces overall number of polishing and grinding stages
- Mounts with hook and loop velcro
- Can be used wet or dry
- Long lifespan of tooling will grind aprox. 1110-1850 m² of concrete
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Boride – 3″ BSD Ceramic SOFT (No Boss)
Hire
-
Day Rate
$35.00 / Day
Made with Blue Star Diamond Technology™, the BSD is designed as a ceramic diamond grinding process to follow the metal bond process. The result of this diamond is a superior floor with reduced stepsSelect optionsProduct Features
- Reduces metal bond diamond steps
- Consistent scratch
- Excellent Finish
- Long life (9,000-15,000 sq. feet)
- Used wet or dry (preferred dry)
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Boride – 3″ BSD Ceramic STANDARD (No Boss)
Hire
-
Day Rate
$35.00 / Day
Made with Blue Star Diamond Technology™, the BSD is designed as a ceramic diamond grinding process to follow the metal bond process. The result of this diamond is a superior floor with reduced steps Product FeaturesSelect options- Reduces metal bond diamond steps
- Consistent scratch
- Excellent Finish
- Long life (9,000-15,000 sq. feet)
- Used wet or dry (preferred dry)
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Boride – 3″ Dry Resin Ultra Premium (No Boss)
Hire
-
Day Rate
$27.00 / Day
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Boride – 5″ EdgeXcel Flex Pad
Hire
-
Day Rate
$89.00 / Day
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Boride – BSD Corner Tool
Hire
-
Day Rate
$28.50 / Day
PRODUCT FEATURES
- Aggressive grind with superb finish
- Blends the corners to match the floor and edges
- Long life and superior performance
A tool that polishes hard to reach areas such as corners and door jams Compatible with most multi tools such as Dremel and FeinAccessory product to the Easy Edge product line.
For ultimate results and to prevent overheating, product needs to be used on a low setting in 3-5 minute bursts.
Concrete: Works well on hard, medium and soft concrete. Dry or wet.
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Boride – BSD Corner Tool Starter Set (Grit 30-400)
Hire
-
Day Rate
$136.00 / Day
PRODUCT FEATURES
- Aggressive grind with superb finish
- Blends the corners to match the floor and edges
- Long life and superior performance
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Bracket Latch, Tennant
Bracket Latch - TennantRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Cartridge Support Kit 3140
Cartridge Support Kit 3140Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Caster Assembly, OEG Rig, Grey Polyurethane Wheel
Caster Assembly, OEG Rig, Grey Polyurethane Wheel, 3" x 3/8" (Tennant 7400)Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Caster/Bumper Wheel, Grey No-Mark, 2″ x 7/8″
Caster/Bumper Wheel, Grey No-Mark, 2" x 7/8"Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Casters for Racatac
- 3" CASTERS FOR RACATAC
- 2" CASTERS FOR RACATAC
CALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Center Pulley Assembly. Diamatic 535
Center Pulley Assembly. Diamatic 535Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Chemtec CHEM 1000 (Polyaspartic Clear 85% Solid)
Available in:Read more- CHEM 1000 2 gallon - Clear
- CHEM 1000 2 gallon - Light Grey
- CHEM 1000 2 gallon - Black
- CHEM 1000 2 gallon - Beige
- CHEM 1000 2 gallon - Custom Color
Call for pricing and order CO: 720-504-5800 CA: 714-527-6700 -
Chemtec CHEM 1000 PREMIUM (Polyaspartic Premium 100% Solid)
Available in:Read more- CHEM 1000 PREMIUM
Call for pricing and order CO: 720-504-5800 CA: 714-527-6700 -
Chemtec CHEM 1000 WT (Polyaspartic WT Clear 85% Solid)
Available in:Read more- CHEM 1000 WT 2 gallon - Clear
- CHEM 1000 WT 2 gallon - Light Grey
- CHEM 1000 WT 2 gallon - Black
- CHEM 1000 WT 2 gallon - Beige
- CHEM 1000 WT 2 gallon - Custom Color
- CHEM 1000 WT 10 gallon - Clear
- CHEM 1000 WT 10 gallon - Light Grey
- CHEM 1000 WT 10 gallon - Black
- CHEM 1000 WT 10 gallon - Beige
- CHEM 1000 WT 10 gallon - Custom Color
Call for pricing and order CO: 720-504-5800 CA: 714-527-6700 -
Chemtec CHEM 3000 2 Gallon Kit (Ultra FC Polyurea Based Filler)
Hire
-
Day Rate
$215.00 / Day
-
-
Chemtec CHEM FILLER FC (2 Component Crack Filler FC)
Hire
-
Day Rate
$171.43 – $180.00 / Day
-
-
Chemtec Chem WB2K (Top Coat Polyurethane)
Available in:Read more- WB2K - Matte - 1 gallon
- WB2K - Gloss - 1 gallon
- WB2K - Satin - 1 gallon
Call for pricing and order CO: 720-504-5800 CA: 714-527-6700 -
Chemtec CHEM-100 FLUX A/B (Low Viscosity Epoxy Resin)
Available in:Read more- CHEM-100 FLUX A/B 3 gallon KIT - Clear
Call for pricing and order CO: 720-504-5800 CA: 714-527-6700 -
Chemtec CHEM-100 Regular A/B (Epoxy Resin Regular)
Available in:Read more- CHEM-100 R A/B 3 gallon KIT - Clear
- CHEM-100 R A/B 3 gallon KIT - Light Grey
- CHEM-100 R A/B 3 gallon KIT - Medium Grey
- CHEM-100 R A/B 3 gallon KIT - Black
- CHEM-100 R A/B 3 gallon KIT - White
- CHEM-100 R A/B 3 gallon KIT - Beige
- CHEM-100 R A/B 3 gallon KIT - Light Beige
- CHEM-100 R A/B 3 gallon KIT - Tan
Call for pricing and order CO: 720-504-5800 CA: 714-527-6700 -
Chemtec CHEM-100 Regular FC A/B (Epoxy Resin Regular Fast Cure)
Available in:Read more- CHEM-100 R A/B 3 gal KIT FC - Clear
- CHEM-100 R A/B 3 gal KIT FC - Light Grey
- CHEM-100 R A/B 3 gal KIT FC - Medium Grey
- CHEM-100 R A/B 3 gal KIT FC - Black
- CHEM-100 R A/B 3 gal KIT FC - White
- CHEM-100 R A/B 3 gal KIT FC - Beige
Call for pricing and order CO: 720-504-5800 CA: 714-527-6700 -
Chemtec CHEM-PROOF RAPID (Vapor Barrier System FC Fast Cure)
Available in:Read more- CHEM-PROOF RAPID 3 gal - Light Grey
- CHEM PROOF RAPID 3 gal - Clear
- CHEM PROOF RAPID 3 gal - Medium Grey
- CHEM PROOF RAPID 3 gal - Light Beige
- CHEM PROOF RAPID 3 gal - Beige
- CHEM PROOF RAPID 3 gal - Tan
- CHEM PROOF RAPID 3 gal - White
- CHEM PROOF RAPID 3 gal - Black
Call for pricing and order CO: 720-504-5800 CA: 714-527-6700 -
Chemtec CHEM-PROOF Slow Cure
Available in:Read more- CHEM PROOF SLOW CURE 3 gallon kit Medium Grey
- CHEM PROOF SLOW CURE 3 gallon kit clear
- CHEM PROOF SLOW CURE 3 gallon kit white
Call for pricing and order CO: 720-504-5800 CA: 714-527-6700 -
Chemtec CHEM-PU (Anti-Scratch PU Top Coat)
Available in:Read more- CHEM-PU Matte - 3 gallon
- CHEM-PU Gloss - 3 gallon
- CHEM-PU Satin - 3 gallon
Call for pricing and order CO: 720-504-5800 CA: 714-527-6700 -
Chemtec CHEM-WATER (High Solids WB Epoxy Resin)
Available in:Read more- CHEM-WATER 3 gallon KIT - Clear
Call for pricing and order CO: 720-504-5800 CA: 714-527-6700 -
Chemtec Chem100 Novolac (Chemical Resistant Epoxy Resin)
Available in:Read more- CHEM100 Novolac - 3 gallon
Call for pricing and order CO: 720-504-5800 CA: 714-527-6700 -
Chips Unlimited 1/4inch Flake 10lbs box – Polished Collection
Hire
-
Day Rate
$40.00 / Day
Coverage: 10-13sqft per lbs of flakeSelect optionsADVANTAGES
- DECORATIVE
- UNLIMITED COLORS AND BLENDS
- STRIPED PATTERNS AVAILABLE
- MULTIPLE SIZES
- CUSTOMIZABLE
- FLAT SURFACE / THIN PROFILE
- FIRE RESISTANT
- RESISTANT TO UV DEGRADATION
- WATER-BASED CHEMISTRY
- ABSORBENT
- LOOSE IN CARTON
-
-
Chips Unlimited 1/4inch Flake 10lbs box – Standard Colors
Hire
-
Day Rate
$46.43 / Day
ADVANTAGES
- DECORATIVE
- UNLIMITED COLORS AND BLENDS
- STRIPED PATTERNS AVAILABLE
- MULTIPLE SIZES
- CUSTOMIZABLE
- FLAT SURFACE / THIN PROFILE
- FIRE RESISTANT
- RESISTANT TO UV DEGRADATION
- WATER-BASED CHEMISTRY
- ABSORBENT
- LOOSE IN CARTON
-
-
Chips Unlimited 1/8inch Flake 55lbs box – Nuna Collections
Coverage: 6-10sqft per lbs of flakeRead moreADVANTAGES
- DECORATIVE
- UNLIMITED COLORS AND BLENDS
- STRIPED PATTERNS AVAILABLE
- MULTIPLE SIZES
- CUSTOMIZABLE
- FLAT SURFACE / THIN PROFILE
- FIRE RESISTANT
- RESISTANT TO UV DEGRADATION
- WATER-BASED CHEMISTRY
- ABSORBENT
- LOOSE IN CARTON
CALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Chips Unlimited 1\4inch Flake 55lbs box – Boden Collections
Hire
-
Day Rate
$130.00 / Day
Coverage: 6-10sqft per lbs of flakeSelect optionsADVANTAGES
- DECORATIVE
- UNLIMITED COLORS AND BLENDS
- STRIPED PATTERNS AVAILABLE
- MULTIPLE SIZES
- CUSTOMIZABLE
- FLAT SURFACE / THIN PROFILE
- FIRE RESISTANT
- RESISTANT TO UV DEGRADATION
- WATER-BASED CHEMISTRY
- ABSORBENT
- LOOSE IN CARTON
-
-
Chips Unlimited 1\4inch Flake 55lbs box – Nuna Collections
Hire
-
Day Rate
$130.00 / Day
Coverage: 6-10sqft per lbs of flakeSelect optionsADVANTAGES
- DECORATIVE
- UNLIMITED COLORS AND BLENDS
- STRIPED PATTERNS AVAILABLE
- MULTIPLE SIZES
- CUSTOMIZABLE
- FLAT SURFACE / THIN PROFILE
- FIRE RESISTANT
- RESISTANT TO UV DEGRADATION
- WATER-BASED CHEMISTRY
- ABSORBENT
- LOOSE IN CARTON
-
-
Chips Unlimited B16-160-1/4 inch Flake 55lbs
Hire
-
Day Rate
$135.00 / Day
ADVANTAGES
- DECORATIVE
- UNLIMITED COLORS AND BLENDS
- STRIPED PATTERNS AVAILABLE
- MULTIPLE SIZES
- CUSTOMIZABLE
- FLAT SURFACE / THIN PROFILE
- FIRE RESISTANT
- RESISTANT TO UV DEGRADATION
- WATER-BASED CHEMISTRY
- ABSORBENT
- LOOSE IN CARTON
-
-
Chips Unlimited Blend BX365 1/4inch Flake 55lbs
Hire
-
Day Rate
$158.00 / Day
ADVANTAGES
- DECORATIVE
- UNLIMITED COLORS AND BLENDS
- STRIPED PATTERNS AVAILABLE
- MULTIPLE SIZES
- CUSTOMIZABLE
- FLAT SURFACE / THIN PROFILE
- FIRE RESISTANT
- RESISTANT TO UV DEGRADATION
- WATER-BASED CHEMISTRY
- ABSORBENT
- LOOSE IN CARTON
-
-
Chips Unlimited Boden Portfolio Sample Board
Hire
-
Day Rate
$59.00 / Day
Flakes included are: Badlands, Olympic, Arches, Teton, Bryce, Acadia, Joshua, Tortugas, Canyon, Bolsa, Avila, Obispo, Cambria, Doheny, Graviota and FolsomAdd to cart -
-
Chips Unlimited Nuna Portfolio Sample Board
Hire
-
Day Rate
$59.00 / Day
Flakes included are: Carlsbad, Saguaro, Sequoia, Glacier, Yosemite, Yukon, Everest and DenaliAdd to cart -
-
Chips Unlimited Polished Portfolio Sample Board
Hire
-
Day Rate
$79.00 / Day
Flakes included are: WhiteStone, GreyStone, FlintStone, GemStone, BlackStone and BlueStoneAdd to cart -
-
Circuit Breaker 25A
25 Amp Circuit Breaker for NSS 3330Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Clamp Pin Steering Handle
Clamp Pin Steering HandleRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Cohills Pro Series® Metal Essence Metallics
Hire
-
Day Rate
$10.00 – $30.00 / Day
A Pigment that is added to 100% Solid Epoxy giving you a variety of effects and color. See our Color Chart showcasing 72 metallic epoxy colors.Select options -
-
Color Juice 3D Hardener (Part A)
Hire
-
Day Rate
$27.50 – $137.50 / Day
Features
- Excellent UV resistance
- In one step, improves abrasion resistance, hardens surface, and improves stain resistance while adding color
- Reducing freeze/thaw damage and salt damage
- May be used on broom finished and textured concrete, or on ground concrete and burnished to a high sheen
- May be used on integrally colored concrete, stamped concrete, or as a touch up for acid stained concrete.
- Easily applied with pump sprayer.
- Horizontal or vertical application.
-
-
Connector 60 Amp 3PH 250VAC 3 Pole 4 Wire (4 Pin Plug Diamatic) 230V Male
Connector 60 Amp 3PH 250VAC 3 Pole 4 Wire (4 Pin Plug Diamatic) 230V MaleRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Contact Green 780 switch
Contact Green 780 switchRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Contact Red 780 switch
Contact Red 780 switchRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Contactor Control Panel BGS-250 2016
Contactor Control Panel BGS-250 2016Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Contactor SPST/SOLENOID
CONTACTOR SPST/SOLENOID - part for NSS Auto ScrubberRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Control Box Vent Cover
Control Box Vent CoverRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Coupling Plastic Star
Coupling Plastic StarRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers 320 CrownShield General Purpose Epoxy Thru-Product
Available in:Read more- CrownShield 320 Clear- Solid Epoxy 1.5 gal Kit
- CrownShield 320 Tan- Solid Epoxy 1.5 gal Kit
- CrownShield 320 Clear- Solid Epoxy 3 gal Kit
- CrownShield 320 Tan- Solid Epoxy 3 gal Kit.
- CrownShield 320 Clear- Solid Epoxy 15 gal Kit.
- CrownShield 320 Tan- Solid Epoxy 15 gal Kit.
- CrownShield 320 Medium Gray- Solid Epoxy 1.5 gal Kit
- CrownShield 320 Light Gray- Solid Epoxy 1.5 gal Kit
- CrownShield 320 Medium Gray - Solid Epoxy 3 gal Kit
- CrownShield 320 Light Gray - Solid Epoxy 3 gal Kit.
- CrownShield 320 Medium Gray - Solid Epoxy 15 gal Kit.
- CrownShield 320 Light Gray - Solid Epoxy 15 gal Kit.
- CrownShield 320 Special Order Color- Solid Epoxy 1.5 gal Kit
- CrownShield 320 Special Order Color- Solid Epoxy 3 gal Kit
- CrownShield 320 Special Order Color- Solid Epoxy 15 gal Kit
- CrownShield 320 Dark Gray- Solid Epoxy 1.5 gal Kit.
- CrownShield 320 Dark Gray- Solid Epoxy 3 gal Kit.
- CrownShield 320 Dark Gray - Solid Epoxy 15 gal Kit.
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers 7000 CrownPro Aliphatic Polyaspartic Polyurea Topcoat
Available in:Read more- CrownPro 7000 Aliphatic Polyaspartic Polyurea Topcoat 2 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers 7350 CrownPro AcidShield Novolac Epoxy
Available in:Read more- CrownPro AcidShield 7350 Medium Gray- 4 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers 8202 CrownPrime™ WB Epoxy Primer and Economical Coating
Available in:Read more- CrownPrime 8202 Clear- Epoxy Primer 1.25 gal Kit
- CrownPrime 8202 Light Gray- Epoxy Primer 1.25 gal Kit
- CrownPrime 8202 Clear- Epoxy Primer 5 gal Kit
- CrownPrime 8202 Light Gray- Epoxy Primer 5 gal Kit.
- CrownPrime 8202 Medium Gray- Epoxy Primer 1.25 gal Kit
- CrownPrime 8202 Tan- Epoxy Primer 1.25 gal Kit
- CrownPrime 8202 Medium Gray- Epoxy Primer 5 gal Kit
- CrownPrime 8202 Tan- Epoxy Primer 5 gal Kit.
- CrownPrime 8202 Special Order Color- Epoxy Primer 5 gal Kit
- CrownPrime 8202 Special Order Color- Epoxy Primer 1.25 gal Kit
- CrownPrime 8202 Dark Gray - Epoxy Primer 5 gal Kit
- CrownPrime 8202 Dark Gray- Epoxy Primer 1.25 gal Kit.
- CrownPrime 8202 White- Epoxy Primer 1.25 gal Kit.
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers 8205 CrownPrime Oil Tolerant Primer
Available in:Read more- CrownPrimer 8205 - Oil Tolerant 5 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers 8327 CrownShield HD, Epoxy UV Resistant
Available in:Read more- CrownShield 8327 HD - Epoxy Clear UV Resistant 3 gal Kit
- CrownShield 8327 HD - Epoxy Medium Gray UV Resistant 3 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers 8502 CrownFlex™ Semi-Rigid Epoxy LV
Available in:Read more- CrownFlex 8502 Clear - 1.5 gal Kit
- CrownFlex 8502 Light Grey - 1.5 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers Crown Aluminum Oxide
Available in:Read more- Crown Aluminum Oxide - 220 Grit Very Fine 1 Can
- Crown Aluminum Oxide - 60 Grit Fine 1 Can
- Crown Aluminum Oxide - 46 Grit Medium 1 Can
- Crown Aluminum Oxide - 36 Grit Course 1 Can
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers Crown Epoxy Accelerator
Available in:Read more- Crown Epoxy Accelerator Clear- 1 can
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers Crown Epoxy Pigment Pack 6300, 1 can for 3 gallons
Available in:Read more- Crown Epoxy Pigment Pack 6300 White- 1 can for 3 gallons
- Crown Epoxy Pigment Pack 6300 Light Gray- 1 can for 3 gallons
- Crown Epoxy Pigment Pack 6300 Medium Gray- 1 can for 3 gallons
- Crown Epoxy Pigment Pack 6300 Dark Gray- 1 can for 3 gallons
- Crown Epoxy Pigment Pack 6300 Charcoal- 1 can for 3 gallons
- Crown Epoxy Pigment Pack 6300 Black- 1 can for 3 gallons
- Crown Epoxy Pigment Pack 6300 Light Tan- 1 can for 3 gallons
- Crown Epoxy Pigment Pack 6300 Tan- 1 can for 3 gallons
- Crown Epoxy Pigment Pack 6300 Sand Beige- 1 can for 3 gallons
- Crown Epoxy Pigment Pack 6300 Brown Stone- 1 can for 3 gallons
- Crown Epoxy Pigment Pack 6300 Tile Red- 1 can for 3 gallons
- Crown Epoxy Pigment Pack 6300 Fast Red- 1 can for 3 gallons
- Crown Epoxy Pigment Pack 6300 Rich Blue- 1 can for 3 gallons
- Crown Epoxy Pigment Pack 6300 Leaf Green- 1 can for 3 gallons
- Crown Epoxy Pigment Pack 6300 Safety Yellow- 1 can for 3 gallons
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers Crown Poly Pigment Pack 6600, 1 can for 2 gallons
Available in:Read more- Crown Poly Pigment Pack 6600 Light Gray- 1 can for 2 gallons
- Crown Poly Pigment Pack 6600 Medium Gray- 1 can for 2 gallons
- Crown Poly Pigment Pack 6600 Charcoal- 1 can for 2 gallons
- Crown Poly Pigment Pack 6600 Tan- 1 can for 2 gallons
- Crown Poly Pigment Pack 6600 Black- 1 can for 2 gallons
- Crown Poly Pigment Pack 6600 Brown Stone- 1 can for 2 gallons
- Crown Poly Pigment Pack 6600 Light Tan- 1 can for 2 gallons
- Crown Poly Pigment Pack 6600 Tile Red- 1 can for 2 gallons
- Crown Poly Pigment Pack 6600 Dark Gray- 1 can for 2 gallons
- Crown Poly Pigment Pack 6600 White- 1 can for 2 gallons
- Crown Poly Pigment Pack 6600 Sand Beige- 1 can for 2 gallons
- Crown Poly Pigment Pack 6600 Fast Red- 1 can for 2 gallons
- Crown Poly Pigment Pack 6600 Rich Blue- 1 can for 2 gallons
- Crown Poly Pigment Pack 6600 Leaf Green- 1 can for 2 gallons
- Crown Poly Pigment Pack 6600 Safety Yellow- 1 can for 2 gallons
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers Crown Poly Pigment Pack 7000, 1 can for 2 gallons
Available in:Read more- Crown Poly Pigment Pack 7000 White- 1 can for 2 gallons
- Crown Poly Pigment Pack 7000 Light Gray- 1 can for 2 gallons
- Crown Poly Pigment Pack 7000 Medium Gray- 1 can for 2 gallons
- Crown Poly Pigment Pack 7000 Dark Gray- 1 can for 2 gallons
- Crown Poly Pigment Pack 7000 Charcoal- 1 can for 2 gallons
- Crown Poly Pigment Pack 7000 Black- 1 can for 2 gallons
- Crown Poly Pigment Pack 7000 Light Tan- 1 can for 2 gallons
- Crown Poly Pigment Pack 7000 Tan- 1 can for 2 gallons
- Crown Poly Pigment Pack 7000 Sand Beige- 1 can for 2 gallons
- Crown Poly Pigment Pack 7000 Brown Stone- 1 can for 2 gallons
- Crown Poly Pigment Pack 7000 Tile Red- 1 can for 2 gallons
- Crown Poly Pigment Pack 7000 Fast Red- 1 can for 2 gallons
- Crown Poly Pigment Pack 7000 Rich Blue- 1 can for 2 gallons
- Crown Poly Pigment Pack 7000 Leaf Green- 1 can for 2 gallons
- Crown Poly Pigment Pack 7000 Safety Yellow- 1 can for 2 gallons
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownBase 8240 Accelerator Clear 1 can
Available in:Read more- CrownBase 8240 Accelerator Clear- 1 can
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownBase Fast Glue 8240 Polyurea Basecoat
Available in:Read more- CrownBase Fast Glue 8240 Light Gray- Polyurea Basecoat 3 gal Kit
- CrownBase Fast Glue 8240 Medium Gray- Polyurea Basecoat 3 gal Kit
- CrownBase Fast Glue 8240 Tan- Polyurea Basecoat 3 gal Kit
- CrownBase Fast Glue 8240 Dark Grey- Polyurea Basecoat 3 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownCaulk 82A 7136, Self-Leveling Polyurea Control Joint Sealant
Available in:Read more- CrownCaulk 82A 7136 Concrete Grey- Self-Leveling Polyurea Control Joint Sealant 1 Catridge
- CrownCaulk 82A 7136 Concrete Grey- Self-Leveling Polyurea Control Joint Sealant 10 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownCote HP 8100 High Performance Polyurethane
Available in:Read more- CrownCote HP 8100 Clear- High Performance Polyurethane 1 gal Kit
- CrownCote HP 8100 Clear- High Performance Polyurethane 4 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownCove 8312 Epoxy Cove Base Resin
Available in:Read more- CrownCove 8312 Clear- Epoxy Cove Base Resin 3 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownCrack 7150 Polyurethane Allow Concrete Repair 2 gallon Kit
Available in:Read more- CrownCrack 7150 Clear- Polyurethane Allow Concrete Repair 2 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownCrack Sealer 120
Available in:Read more- CrownCrack 120 Concrete Grey - Sealer 1.5 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownCrete U 810 Skim Coat
Available in:Read more- CrownCrete U 810 Clear- Skim Coat 1 Kit
- CrownCrete U 810 Pigmented -Special Order Color- Skim Coat 1 Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownCrete U 814 SL 1/4″ Urethane Cement
Available in:Read more- CrownCrete U 814 Clear- Urethane Cement 1 Kit
- CrownCrete U 814 Pigmented -Special Order Color-Urethane Cement 1 Kit
- CrownCrete U 814 Pigmented -Natural Gray-Urethane Cement 1 Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownCrete U 818 SL 1/8″ Urethane Cement
Available in:Read more- CrownCrete U 818 Clear- Urethane Cement 1 Kit
- CrownCrete U 818 Pigmented -Special Order Color-Urethane Cement 1 Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownFlake
Available in:Read more- CrownFlake Midnight- Flake 55 lb box
- CrownFlake Tuxedo- Flake 55 lb box
- CrownFlake Light Grey- Flake 55 lb box
- CrownFlake Smoke- Flake 55 lb box
- CrownFlake CA Grey- Flake 55 lb box
- CrownFlake Saddle Tan- Flake 55 lb box
- CrownFlake Hazelnut- Flake 55 lb box
- CrownFlake Medium Tan- Flake 55 lb box
- CrownFlake Sterling- Flake 40 lb box
- CrownFlake Cobblestone- Flake 40 lb box
- CrownFlake Smoke Blend- Flake 40 lb box
- CrownFlake Charcoal- Flake 40 lb box
- CrownFlake Oyster Shell- Flake 40 lb box
- CrownFlake Carbon- Flake 40 lb box
- CrownFlake Pebble- Flake 40 lb box
- CrownFlake Creekbed- Flake 40 lb box
- CrownFlake Sand- Flake 40 lb box
- CrownFlake Chestnut- Flake 40 lb box
- CrownFlake Coastline- Flake 40 lb box
- CrownFlake Red Blend- Flake 40 lb box
- CrownFlake Blue Blend- Flake 40 lb box
- CrownFlake Deep River- Flake 40 lb box
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownPro 7072SC, Solids Polyaspartic
Available in:Read more- CrownPro 7072SC Clear- Solids Polyaspartic 2 gal Kit
- CrownPro 7072SC Clear- Solids Polyaspartic 10 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownPro 8175 Polyaspartic Coating
Available in:Read more- CrownPro 8175 Clear- Polyaspartic Coating 2 gal Kit
- CrownPro 8175 Clear- Polyaspartic Coating 10 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownPro 8190 High Solids & Low Odor Aliphatic Polyaspartic Coating
Available in:Read more- CrownPro 8190 Clear- Solids Polyaspartic 1.5 gal Kit
- CrownPro 8190 Clear- Solids Polyaspartic 3 gal Kit
- CrownPro 8190 Special Order Color- Solids Polyaspartic 1.5 gal Kit
- CrownPro 8190 Special Order Color- Solids Polyaspartic 3 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownQuartz Pre-Blended Color 50 lb Bag
Available in:Read more- CrownQuartz Gray- Pre-Blended Color 50 lb Bag
- CrownQuartz Natural Gray- Pre-Blended Color 50 lb Bag
- CrownQuartz Creme- Pre-Blended Color 50 lb Bag
- CrownQuartz Mocha- Pre-Blended Color 50 lb Bag
- CrownQuartz Brown- Pre-Blended Color 50 lb Bag
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownSeal CRU 8110 UV Polyurethane
Available in:Read more- CrownSeal CRU 8110 Clear- UV Polyurethane 1.5 gal Kit
- CrownSeal CRU 8110 Clear- UV Polyurethane 15 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownShield Metallic
Available in:Read more- CrownShield Metallic Cinder- Pigments SP710 1 can
- CrownShield Metallic Black Cherry- Pigments SP710 1 can
- CrownShield Metallic Blush- Pigments SP710 1 can
- CrownShield Metallic Chestnut- Pigments SP710 1 can
- CrownShield Metallic Chocolate- Pigments SP710 1 can
- CrownShield Metallic Deep Sea- Pigments SP710 1 can
- CrownShield Metallic Dark Steel- Pigments SP710 1 can
- CrownShield Metallic Fawn- Pigments SP710 1 can
- CrownShield Metallic Midnight- Pigments SP710 1 can
- CrownShield Metallic Ocean- Pigments SP710 1 can
- CrownShield Metallic Opal/White- Pigments SP710 1 can
- CrownShield Metallic Red Wood- Pigments SP710 1 can
- CrownShield Metallic Rust- Pigments SP710 1 can
- CrownShield Metallic Silver- Pigments SP710 1 can
- CrownShield Metallic Sunset- Pigments SP710 1 can
- CrownShield Metallic Suntan- Pigments SP710 1 can
- CrownShield Metallic Champagne- Pigments SP710 1 can
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownShield Metallic 8328 Decorative LV Epoxy Binder
Available in:Read more- CrownShield Metallic 8328 Clear- Decorative LV Epoxy Binder 3 gal Kit
Call for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
Crown Polymers CrownShield MVB-F 8303 Clear, Epoxy Fast Cure
Available in 3 Gallon Kit and 15 Gallon Kit.Read moreCall for pricing and orders: Please call one of our coating experts with over 30 years of coating knowledge to order your coatings. Coatings can be complex, so ordering with one of our experts will save you time and money. CO: 720-504-5800 CA: 714-527-6700 -
CTS Cement – Rapid Set Cement (Purple Bag)
Hire
-
Day Rate
$28.00 – $45.00 / Day
Use to create fast-setting concrete, mortar and grout. Inherent sulfate resistance and low shrinkage. Ready for service in 1 hour.
Rapid Set® Cement is a fast setting, high performance cement that provides faster return to service, high strength, and increased durability. Rapid Set Cement qualifies as very rapid hardening (VRH) per ASTM C1600 (Standard Specification for Hydraulic Cement). Use for highway pavements, bridges, runways, tunnels, tilt-up, precast, sidewalks, floors, and other applications. For larger jobs, batch Rapid Set Cement mixtures using conventional ready mix or volumetric mixer equipment. Conforms to: ASTM C1600.
-
-
CTS Cement – Rapid Set Cement All (Blue Bag) – Multi-Purpose Construction Material & Non-Shrink Grout
Hire
-
Day Rate
$28.00 / Day
Sets in 15 minutes. Structural strength in one hour. Easy to use, just add water.
Cement All® is a high-performance, fast-setting concrete repair material that is an ideal and durable choice for the concrete contractor working in wet environments. Apply Cement All from featheredge to 4" thick. Use for general concrete repair, structural repairs, doweling and anchoring, industrial grouting, formed work, vertical and horizontal trowel applications. This is a high strength product - with the compressive strength reaching 3,000 psi within 24 hours and increasing up to 5,000 psi after 28 days. Conforms to: ASTM C387, C928, C1107, CRD C621. -
-
CTS Cement – Rapid Set Concrete Leveler 50# (Orange Bag)
Hire
-
Day Rate
$26.78 / Day
Ready for foot traffic in 2 to 4 hours. Cover with finish flooring in 4-16 hours. Durable in wet and dry environments.
Concrete Leveler® is a self leveling underlayment with long flow life. Apply from 1/8" to 2″ thick, and up to 5″ thick when extended with aggregate. As a concrete contractor, you'll appreciate the ability of CTS Cement to self level for both indoor and outdoor use, over new or existing concrete floor projects. Tested in accordance with: ASTM C1708. -
-
CTS Cement – Rapid Set Concrete Leveler Primer
Hire
-
Day Rate
$16.20 – $45.50 / Day
Ready to use. Increases adhesion. Designed to prevent pinholes and bubbles.
Concrete Leveler® Primer (CLP) improves the adhesion of Concrete Leveler® to prepared concrete. Using CLP seals porous concrete to prevent pinholes from forming in the finished surface. One quart covers about 50 ft2 to 100 ft2 and one gallon covers about 200 ft2 to 400 ft2.
-
-
CTS Cement – Rapid Set Concrete Mix (Green Bag)
Hire
-
Day Rate
$19.40 / Day
Sets in 15 minutes. Ready for traffic in one hour. Easy to use, just add water.
Concrete Mix is a high-performance, fast-setting structural repair material. Apply Concrete Mix from 2” to 24” thick. Use for general and structural concrete repair, construction of pavements, formed work, footings, setting posts, industrial floors and machine bases. Conforms to: ASTM C387, C928.
-
-
CTS Cement – Rapid Set Dark Pigment
Hire
-
Day Rate
$4.25 / Day
Darken the color of your mixture. Use only with Rapid Set® cement products. Add to concrete, mortar or grout.
Dark is an additive that darkens the shade of gray color of Rapid Set® cement products. Add up to 4 packets maximum per 50-lb to 70-lb bag by dry blending Dark uniformly into Rapid Set cement products. Dark may be used with all other Rapid Set® Concrete Pharmacy® products.
-
-
CTS Cement – Rapid Set Fast Accelerating Additive
Hire
-
Day Rate
$4.25 / Day
Add in low temperatures. Use only with Rapid Set® cement products. Add to concrete, mortar or grout.
Fast is an additive that speeds up the setting time of Rapid Set® cement products when experiencing extreme cold weather environments. Add 1 to 5 packets per 50-lb to 70-lb bag of Rapid Set cement product. Fast may be used with all other Rapid Set® Concrete Pharmacy® products.
-
-
CTS Cement – Rapid Set Flow Control 2.1 oz
Hire
-
Day Rate
$4.25 / Day
Increases fluidity or reduces water. Increases compressive strength. Use only with Rapid Set® cement products.
FLOW Control® is an additive that increases the fluidity of Rapid Set® cement products. FLOW Control can increase compressive strength of Rapid Set cement products by reducing mix water. Add up to 4 packets maximum per 50-lb to 70-lb bag of Rapid Set cement product. FLOW Control may be used with all other Rapid Set® Concrete Pharmacy® products.
-
-
CTS Cement – Rapid Set Level Flor (Blue Bag)
Hire
-
Day Rate
$26.75 / Day
Foot traffic in 2 to 4 hours. Cover with finish flooring in 4-16 hours. Durable in wet and dry environments.
LevelFlor® is a self-leveling underlayment with long flow life. Apply from 1/8” to 2" thick, and up to 5" thick when extended with aggregate. LevelFlor is ideal for indoor and outdoor use, over new or existing concrete floor projects. Tested in accordance with: ASTM C1708.
-
-
CTS Cement – Rapid Set Light Pigment
Hire
-
Day Rate
$4.25 / Day
Lighten the color of your mixture. Use only with Rapid Set® cement products. Add to concrete, mortar or grout.
Light is an additive that lightens the color of Rapid Set® cement products. Add up to 4 packets of Light per 50-lb to 70-lb by dry blending Light uniformly into Rapid Set cement products. Light may be used with other Rapid Set® Concrete Pharmacy® products.
-
-
CTS Cement – Rapid Set Mortar Mix 55# (Brown Bag)
Hire
-
Day Rate
$20.00 / Day
Sets in 15 minutes. Structural strength in one hour. Easy to use, just add water.
Mortar Mix is a fast-setting, high strength structural repair material. Apply Mortar Mix from 1/2" to 6" thick. Use for vertical and overhead applications, including general and structural concrete repair, construction of pavements, stucco and plaster repair, underlayments and formed work. Conforms to: ASTM C387, C928.
-
-
CTS Cement – Rapid Set Set Control
Hire
-
Day Rate
$3.25 / Day
Increases working time. Maintains long-term strength. Use only with Rapid Set® cement products.
SET Control® is an additive that extends the working and setting time to place and finish Rapid Set® cement products. Use 1 to 4 packets per 50-lb to 70-lb bag of Rapid Set cement products. Set Control may be used with all other Rapid Set® Concrete Pharmacy® products.
-
-
CTS Cement – Rapid Set Skim Coat 20# Bag
Hire
-
Day Rate
$26.75 / Day
Apply floor coverings in as soon as 1 hour. Walk on in 1-3 hours. Adheres to plywood substrates.
Skim Coat is a smooth, sand-free, hydraulic cement-based material used under flooring for patching and skim coating on interior and exterior projects. Apply from featheredge to 1" thick. Use Skim Coat to repair, level and smooth cement or concrete substrates, quarry tile, or APA rated interior-grade plywood before installing floor coverings and other protective toppings.
-
-
CTS Cement – Rapid Set TRU Acrylic Primer 1 Gallon
Hire
-
Day Rate
$50.45 / Day
Increases adhesion. Designed to prevent pinholes and bubbles. Concentrated formula for increased coverage.
Acrylic Primer is a concentrated primer to improve the adhesion of Rapid Set® self-leveling flooring products. Acrylic Primer seals porous concrete to prevent pinholes from forming in the finished surface. One gallon covers 400 ft2 to 600 ft2 when properly diluted.
-
-
CTS Cement – Rapid Set TRU PC Bag
Hire
-
Day Rate
$46.20 / Day
Simulates polished concrete. Outstanding clarity and gloss. Grind wet or dry and polish in 24 hours. Available in Natural and Gray colors.
TRU® PC / trupc / TRU-PC Polished Concrete is a high-flow topping that simulates polished concrete after grinding and polishing to expose the aggregate. Place with a minimum thickness of 3/8", or a minimum thickness of 1/2" for floors subjected to high-load, rubber-wheeled traffic. Use for polished concrete floors in schools, airports, warehouses, retail, restaurants, lobbies, and more. TRU PC is available in natural and gray colors. Tested in accordance with: C1708.
-
-
CTS Cement – Rapid Set TRU Self-Leveling Bag
Hire
-
Day Rate
$44.10 / Day
Foot traffic in 2 to 3 hours. Grind wet or dry and polish in 24 hours. Polish to achieve outstanding clarity and gloss. Available in Natural and Gray colors.
TRU® Self-Leveling is a polishable topping that provides long flow life, working time, and a smooth strong surface with high-bond strength. Customize TRU Self-Leveling by adding decorative aggregate or integral colors. Place with a minimum thickness of 1/8", or extend with clean, dry 3/8" pea gravel for thicknesses greater than 1.5". Use for finished floors in commercial, institutional and recreational facilities. Tested in accordance with: ASTM C1708.
-
-
CTS Cement – Rapid Set TRU SP Bag
Hire
-
Day Rate
$49.40 / Day
Salt and pepper finish. Outstanding clarity and gloss. Grind wet or dry and polish in 24 hours. Available in Natural and Gray colors.
TRU SP/ TRUSP / TRU-SP is a high-flow topping with a specialized aggregate that creates a salt and pepper appearance on polished, decorative floors. Customize TRU SP by adding decorative aggregate. Place with a minimum thickness of 3/8”, or a minimum thickness of ½” for floors subjected to high-load, rubber-wheeled traffic. Use for polished concrete floors in schools, airports, warehouses, retail, restaurants, lobbies, and more. TRU SP is available in natural and gray colors. Tested in accordance with: ASTM C1708.
-
-
CTS Cement – Rapid Set UltraFlow 4000/8 (Gold Bag) (available only at Sir Mix)
Hire
-
Day Rate
$34.00 / Day
Exceeds 4000 psi in 8 hours. Fluid for 30 minutes. Can be fluid, flowable, plastic or dry pack.
UltraFlow® 4000/8 is a high-performance, non-shrink precision grout with long flow life and rapid strength gain. Coverage will vary due to jobsite conditions. Use for grouting under base plates and large machinery installations when rapid strength gain and excellent durability are desired. Conforms to: ASTM C1107, CRD C621.
-
-
Curved Squeegee Back Rear Blade 2016
Curved Squeegee Back Rear Blade 2016Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Curved Squeegee Front Blade 37-in-Black
Curved Squeegee Front Blade 37-in-BlackRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Cutting Head Bearing E09215
Cutting Head Bearing E09215Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
DiamaPro Mobile Generator Gas 18KW (DP-GEN-18KW)
Hire
-
Day Rate
$13,300.00 / Day
Features
- Electric start
- Versatile with multiple power outputs: 120V 20 amp | 240V/120V 30 amp 1PH |240V 50 amp 1PH | 480V 30 amp 3PH | 240V 50 amp 3PH
- Easy to maneuver and transport
- Large wheels roll easily over jobsite debris
- 35HP Briggs and Stratton engine
- Top lifting point
- Durable frame
-
-
DiamaPro Mobile Generator Propane 18KW (DP-GEN-18KW-Propane)
Hire
-
Day Rate
$18,900.00 / Day
Features
- Electric Start
- Versatile with multiple power outlets
- 120V 20 amp
- 240V/120V 30 amp 1PH
- 240V 50 amp 1PH
- 480V 30 amp 3PH
- 240V 50amp 3PH
- Easy to maneuver and transport
- Large wheels roll easily over job site debris
- 35HP Briggs and Stratton engine
- Top lifting point
- Durable frame
-
-
DiamaPro ROG-60 Ride-On Grinder
Hire
-
Day Rate
$21,990.00 / Day
Design Features:Add to cart- 20lb Propane Tank
- 2 side transport wheels and lifting arms
- 8 Magnetic Metal Tooling Plates
- 8 Foam Velcro Tooling Plates
- 2 LED Lights
- Dry Vacuum Attachment – 2.5” Camlock
- Dust and Slurry Containment Shroud
- Electric Start w/ Battery
- Forklift Lifting Point
- Easily fits through a standard 36" door
-
-
DiamaPro SVX2-A HEPA Filtered Vacuum, Automatic Self Pulsing Dust Collector 110V
Hire
-
Day Rate
$3,070.00 / Day
-
-
DiamaPro SVX2-M HEPA Filtered Vacuum, Manual pulsing Dust Collector 110Volts
Hire
-
Day Rate
$3,100.00 / Day
-
-
DiamaPro SVX3-A HEPA Filtered Vacuum, Automatic Self Pulsing 110V or 220V 30A
Hire
-
Day Rate
$5,250.00 / Day
-
-
Diamatic – BDC1216 Star filter d460 x 400
Filter - BDC1216 Star filter d460 x 400 Filter & Tie This is NOT the HEPA filterFilterRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Diamatic – 10″X.110 Hex Arbor Shaver Blade
Hire
-
Day Rate
$98.61 / Day
10" Blades for Diamatic Shaver. Items tagged for individual saleAdd to cartFree Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 10F4 circuit breaker for Diamatic 335 Shaver
10F4 circuit breaker for Diamatic 335 ShaverRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Diamatic – 12″ Blade Holder Diamatic Scraper
Hire
-
Day Rate
$340.00 / Day
12" Blade holder Diamatic ScraperAdd to cart -
-
Diamatic – 12V Power Supply Diamatic 780
12V Power Supply Diamatic 780Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Diamatic – 16″ Floor Attachment for 2″ Vac Wand
16" Floor Attachment for 2" Vac WandRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Diamatic – 2.5″ Diamag Resin Adapter
Hire
-
Day Rate
$17.00 / Day
2.5" Diamag Resin AdapterAdd to cart -
-
Diamatic – 21″ Flor Grit Pad
Hire
-
Day Rate
$80.00 / Day
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ (80mm) DRP Wet Polishing Resin
Hire
-
Day Rate
$20.00 / Day
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Diamag Resin Adapter
Hire
-
Day Rate
$29.00 / Day
3" Full Circle Resin AdapterAdd to cart -
-
Diamatic – 3″ Flexres Hy Rubber Backed – 100 Grit
Hire
-
Day Rate
$19.00 / Day
FLEX RESIN HYBRID
- HYBRID-RUBBER BACKED-PREMIUM LONG LIFE
- 12MM THICK FOR LARGER PLATFORMS-800lbs AND ABOVE
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Flexres Hy Rubber Backed – 1500 Grit
Hire
-
Day Rate
$19.00 / Day
FLEX RESIN HYBRID
- HYBRID-RUBBER BACKED-PREMIUM LONG LIFE
- 12MM THICK FOR LARGER PLATFORMS-800lbs AND ABOVE
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Flexres Hy Rubber Backed – 200 Grit
Hire
-
Day Rate
$19.00 / Day
FLEX RESIN HYBRID
- HYBRID-RUBBER BACKED-PREMIUM LONG LIFE
- 12MM THICK FOR LARGER PLATFORMS-800lbs AND ABOVE
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Flexres Hy Rubber Backed – 3000 Grit
Hire
-
Day Rate
$19.00 / Day
FLEX RESIN HYBRID
- HYBRID-RUBBER BACKED-PREMIUM LONG LIFE
- 12MM THICK FOR LARGER PLATFORMS-800lbs AND ABOVE
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Flexres Hy Rubber Backed – 400 Grit
Hire
-
Day Rate
$19.00 / Day
FLEX RESIN HYBRID
- HYBRID-RUBBER BACKED-PREMIUM LONG LIFE
- 12MM THICK FOR LARGER PLATFORMS-800lbs AND ABOVE
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Flexres Hy Rubber Backed – 50 Grit
Hire
-
Day Rate
$19.00 / Day
FLEX RESIN HYBRID
- HYBRID-RUBBER BACKED-PREMIUM LONG LIFE
- 12MM THICK FOR LARGER PLATFORMS-800lbs AND ABOVE
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Flexres Hy Rubber Backed – 800 Grit
Hire
-
Day Rate
$19.00 / Day
FLEX RESIN HYBRID
- HYBRID-RUBBER BACKED-PREMIUM LONG LIFE
- 12MM THICK FOR LARGER PLATFORMS-800lbs AND ABOVE
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Flexres Superflex Rubber Backed – 100 Grit
Hire
-
Day Rate
$43.00 / Day
SUPERFLEX RESIN HYBRID
- HYBRID-RUBBER BACKED-PREMIUM LONG LIFE
- 15MM THICK FOR LARGER PLATFORMS-800lbs AND MORE
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Flexres Superflex Rubber Backed – 1500 Grit
Hire
-
Day Rate
$43.00 / Day
SUPERFLEX RESIN HYBRID
- HYBRID-RUBBER BACKED-PREMIUM LONG LIFE
- 15MM THICK FOR LARGER PLATFORMS-800lbs AND MORE
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Flexres Superflex Rubber Backed – 200 Grit
Hire
-
Day Rate
$43.00 / Day
SUPERFLEX RESIN HYBRID
- HYBRID-RUBBER BACKED-PREMIUM LONG LIFE
- 15MM THICK FOR LARGER PLATFORMS-800lbs AND MORE
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Flexres Superflex Rubber Backed – 3000 Grit
Hire
-
Day Rate
$43.00 / Day
SUPERFLEX RESIN HYBRID
- HYBRID-RUBBER BACKED-PREMIUM LONG LIFE
- 15MM THICK FOR LARGER PLATFORMS-800lbs AND MORE
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Flexres Superflex Rubber Backed – 400 Grit
Hire
-
Day Rate
$43.00 / Day
SUPERFLEX RESIN HYBRID
- HYBRID-RUBBER BACKED-PREMIUM LONG LIFE
- 15MM THICK FOR LARGER PLATFORMS-800lbs AND MORE
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Flexres Superflex Rubber Backed – 50 Grit
Hire
-
Day Rate
$43.00 / Day
SUPERFLEX RESIN HYBRID
- HYBRID-RUBBER BACKED-PREMIUM LONG LIFE
- 15MM THICK FOR LARGER PLATFORMS-800lbs AND MORE
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Flexres Superflex Rubber Backed – 800 Grit
Hire
-
Day Rate
$43.00 / Day
SUPERFLEX RESIN HYBRID
- HYBRID-RUBBER BACKED-PREMIUM LONG LIFE
- 15MM THICK FOR LARGER PLATFORMS-800lbs AND MORE
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Hybrid Metal/Resin 8 Pie Wet/Dry Velcro
Hire
-
Day Rate
$24.00 / Day
These Hybrid resin are wet or dry and very long life excess of 10,000+ feetSelect optionsFree Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Phenolic Polishing Pads
Hire
-
Day Rate
$19.00 / Day
3" Phenolic Polishing Pads (Formerly RESIN I POLISHING RESIN)
- QUALITY 3 MM THIN
- FOR LIGHT MACHINES 400lbs or less
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Round Medium Bond 70 Grit w/ Rubber and Velcro (DRP Brazed Metal)
Hire
-
Day Rate
$84.00 / Day
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Transitional Diamond #0 50 Grit
Hire
-
Day Rate
$44.00 / Day
#0 GRIT 3" TRANSITIONAL DIAMOND Long life Used to remove scratches Great transition from metal bonds to resins Made from hybrid ceramic resin Reduced heat transfer High Production rates Helps save steps during the polishing processAdd to cartFree Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Transitional Diamond #1 Grit
Hire
-
Day Rate
$44.00 / Day
#1 GRIT 3" TRANSITIONAL DIAMOND Long life Used to remove scratches Great transition from metal bonds to resins Made from hybrid ceramic resin Reduced heat transfer High Production rates Helps save steps during the polishing processAdd to cartFree Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3″ Transitional Diamond #4 Grit
Hire
-
Day Rate
$44.00 / Day
#4 GRIT 3" TRANSITIONAL DIAMONDAdd to cart- Long life
- Used to remove scratches
- Great transition from metal bonds to resins
- Made from hybrid ceramic resin
- Reduced heat transfer
- High Production rates
- Helps save steps during the polishing process
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3/16″ (.187) 7″ Beast Blade / Ultracut
Hire
-
Day Rate
$135.00 / Day
CG-7BRZ-187
7" X .187 X 7/8 Blade
MAX RPM 6,700
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 3140 Adapter/Reducer D70/76
3140 Adapter/Reducer D70/76Read moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Diamatic – 4.5″ 9 Seg Cup Wheel Blue
Hire
-
Day Rate
$19.00 / Day
4.5" 9 SEG CUP WHEEL / CUPWHEELS BLUE Extremely aggressive PCD diamond cup wheels Excellent for cutting glues and mastics from floor"Add to cart -
-
Diamatic – 5″ 18 Segment Diamond Cup Wheel
Hire
-
Day Rate
$78.00 / Day
5" 18 SEG DIAMOND CUP WHEEL / CUPWHEELSAdd to cart -
-
Diamatic – 5″ 9 Segment Diamond Cup Wheel
Hire
-
Day Rate
$43.00 / Day
5" 9 SEG D CUP WHEEL / CUPWHEELSAdd to cart -
-
Diamatic – 5″ PCD 4 Segment Diamond Cup Wheel
Hire
-
Day Rate
$85.00 / Day
5" PCD 4 SEG D CUP WHEEL / CUPWHEELSAdd to cart -
-
Diamatic – 7″ Cougr Litex Wheels Abrasive Disk
Hire
-
Day Rate
$8.50 / Day
- Litex style disc used to remove thick coatings, mastic, epoxy or paint.
- Inexpensive, lightweight and aggressive disc allows for higher production at lower cost.
- Reinforced plastic backing eliminates the need for backer pads.
Free Shipping for all diamond orders over $300 in value. Non-diamond items are not included. -
-
Diamatic – 7″ Eco-Shroud – Convertible
Hire
-
Day Rate
$135.00 / Day
Features:
- Design utilizes cyclone dust-extraction technology
- Attaches easily with no-tools
- Durable recycled & virgin vinyl, reinforced with steel ring embedded in perimeter
- Included insert rings allows Premium Dust Shroud to fit most models of popular grinders: Bosch, Dewalt, Hilti, Hitachi, Makita, Metabo, Milwaukee, Rigid
-
-
Diamatic – 7″ Eco-Shroud – Full
Hire
-
Day Rate
$103.00 / Day
Features:
- Design utilizes cyclone dust-extraction technology
- Attaches easily with no-tools
- Durable recycled & virgin vinyl, reinforced with steel ring embedded in perimeter
- Included insert rings allows Premium Dust Shroud to fit most models of popular grinders: Bosch, Dewalt, Hilti, Hitachi, Makita, Metabo, Milwaukee, Rigid
-
-
Diamatic – 7″ Supreme Diamond Cup Wheel – Special
Hire
-
Day Rate
$256.00 / Day
Double row supreme cup wheels / Cupwheels provide smoother finishing and longer life.Select options -
-
Diamatic – 735 Propane Kowasaki Throttle Cable
735 Propane Kowasaki Throttle CableRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Diamatic – 780 Pro Wheel Kit
780 Pro Wheel KitRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700 -
Diamatic – 780 Water Tank Assembly
780 Water Tank AssemblyRead moreCALL TO ORDERCO: 720-504-5800 CA: 714-527-6700